Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSOD

18 Jan 2011   #1
Desolous

Windows 7 x32
 
 
Multiple BSOD

I believe it is a driver issue however I have updated all of my drivers that I can think of. I was using an Nvidia G Card and switched to ATI (Motherboard supports Crossfire for future use) Me and a Friend have been trying to fix the problem to no success.

Is Windows 7 . . .
- x86 32-bit
- the original installed OS on the system? Windows XP Corporate upgraded to 7
- an OEM or full retail version?
- Windows 7 Upgrade is Full Retail the XP was my dads.

- What is the age of system (hardware)? December 26th 2010 Was the first use
- What is the age of OS installation (have you re-installed the OS?) Have reinstalled multiple times for various reasons but they were all clean installs (wiping the HDD). Otherwise Dec 26th 2010

Attached is the Requirements listed from the locked thread in Documents.zip


My System SpecsSystem Spec
.
18 Jan 2011   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Desolous View Post
I believe it is a driver issue however I have updated all of my drivers that I can think of. I was using an Nvidia G Card and switched to ATI (Motherboard supports Crossfire for future use) Me and a Friend have been trying to fix the problem to no success.

Is Windows 7 . . .
- x86 32-bit
- the original installed OS on the system? Windows XP Corporate upgraded to 7
- an OEM or full retail version?
- Windows 7 Upgrade is Full Retail the XP was my dads.

- What is the age of system (hardware)? December 26th 2010 Was the first use
- What is the age of OS installation (have you re-installed the OS?) Have reinstalled multiple times for various reasons but they were all clean installs (wiping the HDD). Otherwise Dec 26th 2010

Attached is the Requirements listed from the locked thread in Documents.zip
Several problems

1- Five year old ATItools.sys file remove and install the newest driver only

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

When it is removed then download and install the fresh copy.

2-Symantec Remove and replace with Microsoft Security essentials

Download and run the Norton Removal Tool to uninstall your Norton product | Norton Support

http://www.microsoft.com/security_essentials/

3- Pool corruption test your memory with memtest

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.


Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot. Test the sticks individually, and if you find a good one, test it in all slots.

Ken J
My System SpecsSystem Spec
18 Jan 2011   #3
Desolous

Windows 7 x32
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by Desolous View Post
I believe it is a driver issue however I have updated all of my drivers that I can think of. I was using an Nvidia G Card and switched to ATI (Motherboard supports Crossfire for future use) Me and a Friend have been trying to fix the problem to no success.

Is Windows 7 . . .
- x86 32-bit
- the original installed OS on the system? Windows XP Corporate upgraded to 7
- an OEM or full retail version?
- Windows 7 Upgrade is Full Retail the XP was my dads.

- What is the age of system (hardware)? December 26th 2010 Was the first use
- What is the age of OS installation (have you re-installed the OS?) Have reinstalled multiple times for various reasons but they were all clean installs (wiping the HDD). Otherwise Dec 26th 2010

Attached is the Requirements listed from the locked thread in Documents.zip
Several problems

1- Five year old ATItools.sys file remove and install the newest driver only

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

When it is removed then download and install the fresh copy.

2-Symantec Remove and replace with Microsoft Security essentials

Download and run the Norton Removal Tool to uninstall your Norton product | Norton Support

http://www.microsoft.com/security_essentials/

3- Pool corruption test your memory with memtest

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.


Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot. Test the sticks individually, and if you find a good one, test it in all slots.

Ken J
Thanks for the information however I have done the memtest before and let it run through all passes and it came up clean. I will try it again if I brought the CD with me to college.

Thanks again
My System SpecsSystem Spec
.

18 Jan 2011   #4
Desolous

Windows 7 x32
 
 

Every time I try use the Guru Driver Cleaner and I hit restart my computer It Blue Screens and I believe that screws it up. Any advice?

Edit- Also the Symantec I use isn't listed on the site. It is a Gov't Issued version I got because my dad worked for the Navy. Would any of those removal tools work on it?
My System SpecsSystem Spec
18 Jan 2011   #5
Desolous

Windows 7 x32
 
 

I uninstalled both the ATI driver and Symantec from Windows Control Panel and Installed Windows Security and new drivers from the ATI website. I will restart my computer after the Windows Security scans to check for a blue screen (I always get a BSOD on shutdown/restart).

Edit: Also used CCleaner to clean the registry after I uninstalled the above.
My System SpecsSystem Spec
18 Jan 2011   #6
Desolous

Windows 7 x32
 
 

Update: It Blue Screened on Restart So I will be giving the Memory Diagnostic test (MemTest86 v 4.10) right now. I am attaching the last Blue Screen Error Report to see if you guys can help with why it Blue screened again. If you reply and it is not a memory issue you message will be sent to my blackberry.
My System SpecsSystem Spec
18 Jan 2011   #7
Desolous

Windows 7 x32
 
 

Memory Test was a 100% success but I still get a BSOD upon reboot. I reran the requirements for the BSOD error and have another zip file full of the dmp files (the old and new ones).
My System SpecsSystem Spec
18 Jan 2011   #8
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Hello,

I could be Hardware issue. You have any external devices connected ? Because the stacks are pointing to ready boost.

Run SFC /SCANNOW Command - System File Checker

Code:
DRIVER_CORRUPTED_EXPOOL (c5)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is
caused by drivers that have corrupted the system pool.  Run the driver
verifier against any new (or suspect) drivers, and if that doesn't turn up
the culprit, then use gflags to enable special pool.
Arguments:
Arg1: 00000004, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000000, value 0 = read operation, 1 = write operation
Arg4: 82b6187b, address which referenced memory

Debugging Details:
------------------


BUGCHECK_STR:  0xC5_2

CURRENT_IRQL:  2

FAULTING_IP: 
nt!ExDeferredFreePool+21b
82b6187b 397b04          cmp     dword ptr [ebx+4],edi

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  svchost.exe

TRAP_FRAME:  ab4039bc -- (.trap 0xffffffffab4039bc)
ErrCode = 00000000
eax=86274000 ebx=00000000 ecx=000001ff edx=00000034 esi=86273a40 edi=86273a48
eip=82b6187b esp=ab403a30 ebp=ab403a68 iopl=0         nv up ei ng nz ac pe cy
cs=0008  ss=0010  ds=0023  es=0023  fs=0030  gs=0000             efl=00010297
nt!ExDeferredFreePool+0x21b:
82b6187b 397b04          cmp     dword ptr [ebx+4],edi ds:0023:00000004=????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from 82b6187b to 82a8782b

STACK_TEXT:  
ab4039bc 82b6187b badb0d00 00000034 00000000 nt!KiTrap0E+0x2cf
ab403a68 82b608aa 82b768c0 00000000 862b64e0 nt!ExDeferredFreePool+0x21b
ab403ad0 8bdc6c5e 862b64e0 00000000 000000c0 nt!ExFreePoolWithTag+0x8a4
ab403ae8 8bdc7e42 8601a008 000000c0 86051180 rdyboost!SMKM_STORE<SMD_TRAITS>::SmStReleaseRegion+0x28
ab403b00 8bdcba24 8601a050 000000c0 8bde10b0 rdyboost!ST_STORE<SMD_TRAITS>::StReleaseRegion+0x24
ab403b20 8bdcbae8 8601a050 00000000 8601a008 rdyboost!ST_STORE<SMD_TRAITS>::StDmCleanup+0xb4
ab403b34 8bdcbbe9 8601a008 8601a008 8601a008 rdyboost!ST_STORE<SMD_TRAITS>::StCleanup+0x14
ab403b48 8bdcbc92 8601a008 00000001 8bde10f8 rdyboost!SMKM_STORE<SMD_TRAITS>::SmStCleanup+0x57
ab403b64 8bde8c45 8bde10b0 8601a008 00000001 rdyboost!SMKM_STORE_MGR<SMD_TRAITS>::SmStoreMgrCallback+0x2a
ab403b84 8bdc89cd 00000008 8bde10b0 ab403bb4 rdyboost!SmKmCleanup+0x79
ab403b94 8bde3ab3 8bde10b0 00000000 8828b288 rdyboost!SMKM_STORE_MGR<SMD_TRAITS>::SmCleanup+0xf
ab403bb4 8bdd48f5 8bde10b0 00000000 209e39b3 rdyboost!SmdRBContextShutdown+0x83
ab403bfc 82a7d4bc 8601ac58 8828b288 8828b288 rdyboost!SmdDispatchDeviceControl+0x273
ab403c14 82c7ef6e 8901ef80 8828b288 8828b2f8 nt!IofCallDriver+0x63
ab403c34 82c9bd5f 8601ac58 8901ef80 00000000 nt!IopSynchronousServiceTail+0x1f8
ab403cd0 82c9e53a 8601ac58 8828b288 00000000 nt!IopXxxControlFile+0x6aa
ab403d04 82a8444a 00000328 00000000 00000000 nt!NtDeviceIoControlFile+0x2a
ab403d04 779564f4 00000328 00000000 00000000 nt!KiFastCallEntry+0x12a
WARNING: Frame IP not in any known module. Following frames may be wrong.
0132f4f0 00000000 00000000 00000000 00000000 0x779564f4


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!ExDeferredFreePool+21b
82b6187b 397b04          cmp     dword ptr [ebx+4],edi

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!ExDeferredFreePool+21b

FOLLOWUP_NAME:  Pool_corruption

IMAGE_NAME:  Pool_Corruption

DEBUG_FLR_IMAGE_TIMESTAMP:  0

MODULE_NAME: Pool_Corruption

FAILURE_BUCKET_ID:  0xC5_2_nt!ExDeferredFreePool+21b

BUCKET_ID:  0xC5_2_nt!ExDeferredFreePool+21b

Followup: Pool_corruption
---------
My System SpecsSystem Spec
18 Jan 2011   #9
Desolous

Windows 7 x32
 
 

I have a WebCam and Mic set up at the moment. I do have a internal DLink adapter but I am not using it and most likely going to take it out because it is out of date. Doing the Scan now
My System SpecsSystem Spec
18 Jan 2011   #10
Desolous

Windows 7 x32
 
 

Scan is complete 100% Nothing bad reported.
My System SpecsSystem Spec
Reply

 Multiple BSOD




Thread Tools




Similar help and support threads
Thread Forum
BSOD Multiple types multiple times a day, can't pin down the problem
Hello everyone, I came here once before for assistance, but the issue was unable to be resolved. Here is the link to the previous thread. https://www.sevenforums.com/bsod-help-support/342840-several-bsod-no-singular-triggers.html There is no singular trigger to set this off. Sometimes I can...
BSOD Help and Support
Multiple BSOD Multiple Drivers - Fresh Install (atikmdag.sys = main)
Hi, i had been having issues with bluescreens once every week or so. I took action by updating my drivers etc but this did not fix the issue. I re-installed windows and got all my drivers on and such yet the problem persists with more bluescreens, more often and with more driver causes. Before the...
BSOD Help and Support
BSOD Multiple times multiple errors 0x0000001A
Last week I started receiving BSODs, and after the first one it got to the point where my computer was not booting up and my hard drive was beeping very angrily at me. I was not sure what all the problems were, however I also knew that there was something seriously wrong with my hard drive, so I...
BSOD Help and Support
Multiple BSOD's with multiple errors occuring randomly
Just realized I uploaded the wrong zip folder, It doesn't have everything in it. Fixed that now though! Sorry about the hassle! So I built my own PC a a good few months back, and within a month I experienced a BSOD, and now they are very frequent. They can happen three or four times a day, or...
BSOD Help and Support
BSOD errors. multiple times during multiple programs
windows 7 x64 - original install on system but i don't have my disks. they are somewhere... - full retail version installed - age of the system is approximately 3 years - age of the install is approximately 2 years it seems to happen at random but i get BSODs. approximately 2-3 times a day...
BSOD Help and Support
Multiple BSOD at Random Times with Multiple Drivers Identified
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:02.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App