Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: New Hardware Same BSoDs

23 Jan 2011   #1
silverhuskey

Windows 7 Home Premium 64-bit
 
 
New Hardware Same BSoDs

Hey everyone,

Unfortunately, it looks like I'm back with blue screen errors again. Previously, I had updated all of my drivers, and when that failed I sent my computer back to the manufacturer for repairs. Both the motherboard and CPU were replaced and all seemed well until a little while ago.

About two or three weeks ago I began to have errors when I put the computer into sleep mode. It wouldn't wake up and the motherboard when continuously beep, I reseated the RAM and that seemed to fix the issue. Then it happened again when booting up my computer after it had been off all night. I once again reseated the RAM but got a blue screen a few hours later. Then got the same problem when waking it up from sleep mode. So I tried taking out one stick of RAM and ran that for a few days and all seemed well (with sleep mode) until this morning. I reseated the RAM again, the computer restarted (skipping past the windows login and appear exactly as I'd left it in sleep mode). Then while browsing the internet it restarted on its own twice. And a blue screen log appeared.

I'm not sure what's going on, but my reports are attached. I didn't want to bother the files from my previous blue screens, but they're in the zip files. The recent ones are from January on, when I got my computer back.

The OS is an OEM version, 64-bit, and the hardware is less than a year old. The reinstall was done in late December.

Thanks for any insight to this problem.

(If it turns out to be hardware, I'll be sure to call up the manufacture again and have it replaced since I still have time left on the warranty. Though the shipping is really expensive. =/ )


My System SpecsSystem Spec
.
23 Jan 2011   #2
yowanvista

Windows 10 Pro x64, Arch Linux
 
 

Defective hardware is still the cause
Stop 0x124 - what it means and what to try

Code:
BugCheck 124, {0, fffffa800320a8f8, 0, 0}

Probably caused by : hardware
My System SpecsSystem Spec
23 Jan 2011   #3
silverhuskey

Windows 7 Home Premium 64-bit
 
 

If the drivers are all updated then I'll start with RAM checks. I kind of hope it's the RAM as I'm on my third motherboard and second CPU. x_x I'll post the results of my test, though the checks might take a few days.

Thanks for the help!
My System SpecsSystem Spec
.

Reply

 New Hardware Same BSoDs




Thread Tools




Similar help and support threads
Thread Forum
Lenovo T440s, multiple BSODs. Hardware replaced but BSODs continue
Thanks in advance for any advice. The BDODs appear to be of multiple types. Motherboard, RAM, wireless card and SSD were all replaced in early October and system completely reinstalled but BSODs continue. They are more likely to occur 1-2 min after waking from sleep, but recently also occurred...
BSOD Help and Support
BSODs, possible faulty hardware but not sure...
Hi Everyone, My PC recently crashed, i.e. would not boot into Windows and I had to reinstall. I thought I may have fried the processor by overheating it (apparently I did not apply the thermal paste very effectively when I assembled this thing back in 2011...) but that does not seem to be the...
BSOD Help and Support
New Hardware BSODs
Recently I had my PSU die and when removing it I cleaned out the computer, and either when the PSU died or when I was cleaning out the computer, my CPU died too. So I went out and bought a new PSU, CPU, Motherboard, and RAM. I installed it all, installed Windows 7, started installing my programs,...
BSOD Help and Support
NEW PC HARDWARE BSODS - minidumps in
Hi you all!! Well, I've had a lot of bsods. I've test hdd, ram, change cpu but they still here... So I need your help;) Bsods always happen after few minutes - three, four - system is logged. And, after first bsod, such restart means another bsod...:mad: So, I turn pc off and go to sleep. In...
BSOD Help and Support
BSODs...possibly hardware
I did an upgrade on a computer about a week ago. After about 4 days it started BSODing. It wa so bad that I couldnt get the minidump out and have tried reinstalling 7 and even the Vista factory image. However, it would BSOD before the image would fully load. Clearly this is a hardware issue though...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:12.
Twitter Facebook Google+