Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Bsod page_fault_in_nonpaged_area

08 Feb 2011   #51
easwar2641993

Windows 7 Home Basic Service Pack 1 64bit
 
 

Quote   Quote: Originally Posted by CarlTR6 View Post
OK, turn off Driver Verifier and let's see how your system runs. Disable the graphics card and the sound card, run your system for a day and see how it does. If it runs smoothly, add the sound card back and run your system. If it still runs smoothly, add the graphics card. If that triggers a problem, try removing the sound card and leaving the graphics card and see what happens. Do all of this with Driver Verifier disabled.
i think i found the issue..its related with Monitor..since with driver verifier enabled for sound and lan,and disabled that of graphics,no bsod triggers while booting..this is clear when bsod occurs while using onboard graphics card..there is the same bsod if i use graphics card or onboard graphics..now system is running with standard graphics driver with sound and lan original drivers..driver verifier is also enabled..the system is running fine..no bsod triggers...if i install graphics driver,then enable verifier for it,bsod occurs..no matter whether it is onboard or pci express.So monitor is the culprit..16 inch wide screen AOC monitor..its really surprising that a monitor is the culprit of bsod..anyway it is almost proved i think..since no bsod now..


My System SpecsSystem Spec
.
08 Feb 2011   #52
CarlTR6

Windows 7 Ultimate 32 bit
 
 

Do you have access to another monitor you can try? It would not be the first time I have seen a faulty monitor.
My System SpecsSystem Spec
08 Feb 2011   #53
easwar2641993

Windows 7 Home Basic Service Pack 1 64bit
 
 

Quote   Quote: Originally Posted by CarlTR6 View Post
Do you have access to another monitor you can try? It would not be the first time I have seen a faulty monitor.
I don't have any other monitor.That's very bad.I never thought monitors can cause BSOD..I have a friend who has a system of the same configuration..only the case is different.but all other parts are exactly same model.So can I enable verifier there and watch if any problem occurs?
My System SpecsSystem Spec
.

08 Feb 2011   #54
DeanP

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

Do you have a TV that is capable of connecting PC to it? (VGA, S Video, HDMI)
My System SpecsSystem Spec
09 Feb 2011   #55
easwar2641993

Windows 7 Home Basic Service Pack 1 64bit
 
 

Quote   Quote: Originally Posted by CarlTR6 View Post
Do you have access to another monitor you can try? It would not be the first time I have seen a faulty monitor.
NO..Its not the issue with monitor..bsod occurred when I used another LCD monitor.So..what it could be???HARD DISK????it is newly replaced 320 gb seagate hard disk and i can hear sounds when i take it while system is running..sounds mean something like sparking sounds....sometimes vibrations are also occuring...i checked hard disk with its utility..but no errors were found....
My System SpecsSystem Spec
09 Feb 2011   #56
DeanP

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

If you think the hard drive is the culprit, test it: | Seagate
My System SpecsSystem Spec
10 Feb 2011   #57
easwar2641993

Windows 7 Home Basic Service Pack 1 64bit
 
 

Quote   Quote: Originally Posted by DeanP View Post
If you think the hard drive is the culprit, test it: | Seagate
Here is the new dump pointing to the nvidia driver....
My System SpecsSystem Spec
11 Feb 2011   #58
Jonathan_King

Windows 7 Professional x64
 
 

Have you run Prime95 yet? If not, run the Small and Large FFTs tests, as well as the Blend one: https://www.sevenforums.com/tutorials...t-prime95.html

There is nothing of concern in the dump; everything looks good.

Why are you using a UPS at all? Is the power really that spotty where you are? A UPS not providing enough power would have a similar effect on the computer as a spotty electrical circuit. Thus, by disconnecting the UPS, you are getting more power, but less reliable.

The better way would be to try a new UPS; perhaps you could take your system to another place, and see if the problem exists there too?

Also, try disconnecting the CD/DVD driver from the system; see if that does the trick.
My System SpecsSystem Spec
12 Feb 2011   #59
easwar2641993

Windows 7 Home Basic Service Pack 1 64bit
 
 

Now I removed the graphics card and enabled onboard.Then reformatted and reinstalled Windows.This time I installed Windows XP professional SP3.And installed drivers from Motherboard CD.Then enabled verifier.No BSOD.Worked Fine.Then I installed Windows 7 by formatting Windows XP drive.And installed drivers from motherboard cd.Enabled verifier.No BSOD.Yesterday evening I did this.Till Now no BSOD.But if I install graphics card and its drivers,then enable verifier for it,BSOD occurs.Now I removed it again.And enabled verifier again for onboard and other drivers.No BSOD..So GRAPHICS CARD is the culprit??It is a very new card of XFX GT 240 1GB GDDR5..I checked it with furmark and found no issues.It never reach above 45 degree C at idle state and never reach above 70 degree C while gaming.I have not overclocked the card.I have used latest drivers as well as old drivers.I have posted that bsod occurs from onboard card too right?At that time,i hadn't uninstall forceware drivers .
My System SpecsSystem Spec
12 Feb 2011   #60
Jonathan_King

Windows 7 Professional x64
 
 

It sounds like the graphics card is indeed the problem; I suggest you RMA it, and get a new one. You can also try installing the card in another system and see if the problem exists there too.
My System SpecsSystem Spec
Reply

 Bsod page_fault_in_nonpaged_area




Thread Tools




Similar help and support threads
Thread Forum
Bsod page_fault_in_nonpaged_area
Hi All, I have today found BSOD Page Fault in Nonpaged Area. Spec: Win 7 Ultimate 32bit
BSOD Help and Support
Bsod page_fault_in_nonpaged_area
Bug code: 0x00000050 Caused by driver: ntoskrnl.exe Caused by address: ntoskrnl.exe+75bc0
BSOD Help and Support
Bsod page_fault_in_nonpaged_area
Hi guys Little bit of help required please. Last night i did windows updates and shut my machine down. I've come to boot it today and blue screen on death as shown with an attachment. I have an SSD with my page file on a separate drive. I have 32gb Ram, tried to boot with just 1 8gb stick,...
BSOD Help and Support
bsod PAGE_FAULT_IN_NONPAGED_AREA
inter core i7 2600 asus p8z77-m ddr3 8gb nvidia geforce gt 630 550w corsair bsod PAGE_FAULT_IN_NONPAGED_AREA i hv tried many solutions
BSOD Help and Support
Bsod page_fault_in_nonpaged_area
Hello everybody. While I was browsing and doing an update to battlefield 3 I encountered a BSOD PAGE_FAULT_IN_NONPAGED_AREA. My OS is WIN 7 PRO 64bit and a 3 days old. Before I installed it I had win 7 installed from the day it was released. During the past 2-3 weeks I had many BSODs and decided to...
BSOD Help and Support
Bsod page_fault_in_nonpaged_area
Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.256.48 Locale ID: 4105 Additional information about the problem: BCCode: 50 BCP1: FFFFFA8009904CF8 BCP2: 0000000000000000 BCP3: FFFFF88008B9F794
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:56.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App