Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Bsod page_fault_in_nonpaged_area

22 Feb 2011   #81
Jonathan_King

Windows 7 Professional x64
 
 

As long as you select the same settings, I don't think so.


My System SpecsSystem Spec
.
22 Feb 2011   #82
easwar2641993

Windows 7 Home Basic Service Pack 1 64bit
 
 

Quote   Quote: Originally Posted by Jonathan_King View Post
As long as you select the same settings, I don't think so.
Ok..if vista and xp is not showing bsods,then it could be a software issue in Windows 7 right?Though I ran verifier after reformatting then bsod occurred.Then installed all drivers provided by manufacturer.Then also bsod occurred.
I found a particular driver for which if I update that driver when verifier is enabled,I get bsod.
the driver is Intel(R) 4 Chipset series PCI Express root port - 2E31.Updated that driver using safe mode.Then restarted normally,I get bsods still.The issue is with display.no matter it is onboard or pci-e..but If i use standard display driver ,I wont get bsod.If I select drivers except display in verifier,I wont get bsod.
My System SpecsSystem Spec
22 Feb 2011   #83
Jonathan_King

Windows 7 Professional x64
 
 

Let me make sure I understand: did the system you took the graphics card to BSOD at all?
My System SpecsSystem Spec
.

22 Feb 2011   #84
easwar2641993

Windows 7 Home Basic Service Pack 1 64bit
 
 

Quote   Quote: Originally Posted by Jonathan_King View Post
Let me make sure I understand: did the system you took the graphics card to BSOD at all?
First I enabled verifier there and ran Windows 7.There also triggered the same BSOD.Using onboard video.I disabled verifier.Then I inserted the card and installed drivers and then enabled verifier.Then the same BSOD occurred.The important thing is in Windows 7 using verifier,it triggers BSOD if display drivers are verified.No matter whether it is onboard or discrete.Since both new DG41WV motherboards has this issue,it is more likely to be a software issue I think.Since same settings in verifier is used in Vista and XP and no BSOD there.Both motherboards used 1333Mhz RAM.I asked many of the people here for 1066Mhz RAM.Most of them are using DDR2 800Mhz and DDR3 1333Mhz.It is quite surprising that no one have the 1066Mhz DDR3 RAM.Anyway one thing is sure from this.There is no issue with graphics card and onboard card.May be it is a software (driver) conflict or this ram issue.
My System SpecsSystem Spec
23 Feb 2011   #85
Jonathan_King

Windows 7 Professional x64
 
 

Try cleaning the drivers completely again, using Driver Sweeper. Then install an older version of those nVidia drivers; not the latest.

NVIDIA DRIVERS 260.99 WHQL
My System SpecsSystem Spec
23 Feb 2011   #86
easwar2641993

Windows 7 Home Basic Service Pack 1 64bit
 
 

Quote   Quote: Originally Posted by Jonathan_King View Post
Try cleaning the drivers completely again, using Driver Sweeper. Then install an older version of those nVidia drivers; not the latest.

NVIDIA DRIVERS 260.99 WHQL
Actually I have done that.Not only that old driver,I have used 255,197 series,196 series and 195 series.All the drivers are uninstalled by Driver Sweeper.No change.BSOD occurs if I enable verifier.It is not the card's issue since onboard card GMA X4500 shows the same error with verifier enabled for the Intel driver.It occurs without the graphics card in the system.
I will upload msinfo file from which I hope you can get more details about the system.But system runs fine without verifier now.After the installation of SP1,system runs some what fastly.in some scenarios.
My System SpecsSystem Spec
23 Feb 2011   #87
Jonathan_King

Windows 7 Professional x64
 
 

Strange.

Would you mind uploadig a new jcgriff2 report: https://www.sevenforums.com/crashes-d...tructions.html
My System SpecsSystem Spec
24 Feb 2011   #88
easwar2641993

Windows 7 Home Basic Service Pack 1 64bit
 
 

Quote   Quote: Originally Posted by Jonathan_King View Post
Strange.

Would you mind uploadig a new jcgriff2 report: https://www.sevenforums.com/crashes-d...tructions.html
ohhkk..but now system is working fine..no bsod..I am really afraid to enable verifier again..you mean verifier bsod's dump?
My System SpecsSystem Spec
24 Feb 2011   #89
easwar2641993

Windows 7 Home Basic Service Pack 1 64bit
 
 

Quote   Quote: Originally Posted by Jonathan_King View Post
Strange.

Would you mind uploadig a new jcgriff2 report: https://www.sevenforums.com/crashes-d...tructions.html
Can I try this one?
http://support.microsoft.com/kb/2494666
Since bsod occurs only in Windows 7..so just trying?
My System SpecsSystem Spec
24 Feb 2011   #90
DeanP

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

Are you getting one of those error cods in the Microsoft KB article? If not, then don't run the hotfix.
My System SpecsSystem Spec
Reply

 Bsod page_fault_in_nonpaged_area




Thread Tools




Similar help and support threads
Thread Forum
Bsod page_fault_in_nonpaged_area
Hi All, I have today found BSOD Page Fault in Nonpaged Area. Spec: Win 7 Ultimate 32bit
BSOD Help and Support
Bsod page_fault_in_nonpaged_area
Bug code: 0x00000050 Caused by driver: ntoskrnl.exe Caused by address: ntoskrnl.exe+75bc0
BSOD Help and Support
Bsod page_fault_in_nonpaged_area
Hi guys Little bit of help required please. Last night i did windows updates and shut my machine down. I've come to boot it today and blue screen on death as shown with an attachment. I have an SSD with my page file on a separate drive. I have 32gb Ram, tried to boot with just 1 8gb stick,...
BSOD Help and Support
bsod PAGE_FAULT_IN_NONPAGED_AREA
inter core i7 2600 asus p8z77-m ddr3 8gb nvidia geforce gt 630 550w corsair bsod PAGE_FAULT_IN_NONPAGED_AREA i hv tried many solutions
BSOD Help and Support
Bsod page_fault_in_nonpaged_area
Hello everybody. While I was browsing and doing an update to battlefield 3 I encountered a BSOD PAGE_FAULT_IN_NONPAGED_AREA. My OS is WIN 7 PRO 64bit and a 3 days old. Before I installed it I had win 7 installed from the day it was released. During the past 2-3 weeks I had many BSODs and decided to...
BSOD Help and Support
Bsod page_fault_in_nonpaged_area
Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.256.48 Locale ID: 4105 Additional information about the problem: BCCode: 50 BCP1: FFFFFA8009904CF8 BCP2: 0000000000000000 BCP3: FFFFF88008B9F794
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:02.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App