Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Autochk Error Win7 boots, errors, BSODs

29 Jan 2011   #1
Trcx

Win 7 Ultimate x64
 
 
Autochk Error Win7 boots, errors, BSODs

Hi,

I purchased a new ssd and was resizing partitions (back up partitions first) and moving them around using gparted , reboot a was greeted by an error causing windows to not boot at all. Booted off of the repair cd. It said it found a problem I told it to fix it and reboot. Windows now loaded but after the Starting Windows animation i get "Autochk program not found - skipping autocheck" and then a BSOD saying:

STOP: c000021a (Fatal System Error)
The Session Manager Initialization system process terminated unexpectedly with a
status of 0xc0000003a (0x00000000 0x00000000)
The system has been shutdown.

So this is what I tried after googling a little bit.
-Windows startup repair ran 3+ times in row
-Checked with GParted the partition is not marked as hidden
-Chkdsk didn't find anything
-Sfc won't run say that "there is a system repair pending which requires a reboot to complete. Restart windows and run sfc again." (tried still won't run)
-I verified that autochk existed
-ran every option of bootrec
-I enable boot logging the log is attached
-Safemode won't boot--give me the same error and bsods

More information about my system
-I use avg antivirus
-Nothing from norton has ever been installed

Does anyone have any suggestions? Like I said I have all my files backup, but do not want to have to do a complete reinstall unless absolutely necessary.

Thank You for all your help in advance,
Trcx


My System SpecsSystem Spec
.
30 Jan 2011   #2
DeanP

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

In Command Prompt (at Windows 7 Repair/Startup Repair), type... in the commands....

bootrec /fixboot
bootrec /fixmbr
bootrec /Rebuildbcd


If those does not work, I would use System Restore to restore to a point before the problem started.

If you need help or want to ask a question - please do not hesitate to ask.

Regards...

Dean
My System SpecsSystem Spec
30 Jan 2011   #3
Trcx

Win 7 Ultimate x64
 
 
Already tried

I already tried the bootrec several time with all the different options, anyways the mbr is fine because windows starts to load (ie see the windows animation) it is after windows loads that the trouble starts. I looked at system restore, and it says that it can not find any restore points, which is funny because they should be some.

Here are some more logs I hope they help

Trcx
My System SpecsSystem Spec
.

30 Jan 2011   #4
DeanP

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

Try this...
- Press F8 during boot. Select Last Known Good Configuration.

If that doesn't work... it is likely coming from your new SSD.
I would do a repair install (you will not lose anything): Repair Install

If that doesn't work - replace your SSD.
My System SpecsSystem Spec
31 Jan 2011   #5
Trcx

Win 7 Ultimate x64
 
 

Never mind I just did a clean install :) anyway after reading the tutorial it says that you can not boot off the disk you must be in windows to do a repair install. I was unable to boot into windows, safe mode, or last good configuration. Oh well I need the computer to be working today so I decided to just reinstall windows. I had wasted to much time trying to fix the problem. THANKS for everything tho

Trcx
My System SpecsSystem Spec
Reply

 Autochk Error Win7 boots, errors, BSODs




Thread Tools




Similar help and support threads
Thread Forum
Autochk cannot run due to an error caused by a recently installed soft
hello everyone - this is my first post and i'm in need of some serious assistance. i hope someone can help. I have a custom desktop with an intel i7 3820, asus rampage iv mb, 32gb ram, gtx580 fermi, and a crucial 256gb ssd. I have additional hard drives that run programs and store files, but...
Performance & Maintenance
BSOD every boot 0x1e, safe mode boots ~1/2 the time, scannow errors
Hi folks, I'm getting BSOD 0x1e every time I try to boot, can boot into safe mode with or without networking about half the time, get BSOD at the end of the screen that shows which .sys files are being loaded when safe mode bsods. I'm currently bed bound following back surgery and not being able...
BSOD Help and Support
BSOD and errors when computer cold boots
Hi there I have a computer which when cold boots will come up with windows failed to start... i have tried the startup repair, but that doesn't find anything to fix. If I select continure to boot, it sometimes will BSOD or will boot like nothing has happened... The BSOD error is 0x0000007e...
BSOD Help and Support
Need to run chkdsk but autochk.exe not found-skipping autochk. but....
Well apparently i have some missing files on my computer because Norton is telling me to run chkdsk. So i go to run it and tell it to start on boot up. When boot up comes up i get the message: autochk not found - skipping autochk so my chkdsk can run because autochk.exe isnt there, but this...
Performance & Maintenance
BSODs on first boots, otherwise stable - out of ideas
Okay, so I'm back for another go. Problem: The pc will run into BSOD every time I first boot it from after shutting it down. The BSOD is withougt a minidump and occurs a couple of seconds after the windows flag appears. And if I don't do anything, it will keep BSODing every single time it...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:08.
Twitter Facebook Google+