Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD - After clean install

01 Feb 2011   #1

Windows 7 Home, 64 bit
BSOD - After clean install

My computer is about 8 months old. I've been having troubles with it for a while. I just recently wiped the harddrive with a clean install due to my previous BSOD problem. I figured out the route cause of my previous BSOD's (AVG conflicting with ATI's drivers) and solved that problem.

I performed the clean install about a week ago. All windows and all drivers are completely up to date as of the clean install. The first few days things went perfectly fine, and for the past 3 days I have been receiving one BSOD every day. It occurs while my computer is idle. I can't figure out how to fix this one. I've attached the dump files as well as my DXDiag file. Any help would be greatly appreciated.

My System SpecsSystem Spec
01 Feb 2011   #2

Windows 10 Pro x64, Arch Linux

The Radeon drivers are the cause
Uninstall the radeon drivers and use driver sweeper to remove the remnants of any ATI files
Then reinstall the drivers Guru3D - Driver Sweeper
AMD Graphics Drivers & Software

BugCheck 3B, {c0000005, fffff8800478d817, fffff88007309900, 0}

Probably caused by : atikmdag.sys ( atikmdag+90817 )

ASACPI.sys the 2005 version is a huge cause of BSOD's

The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 8th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).
ASACPI.sys        fffff880`04090000    fffff880`04098000    0x00008000    0x42476c4c    28/03/2005 06:30:36
My System SpecsSystem Spec
06 Feb 2011   #3

Windows 7 Home, 64 bit

Thanks for the quick reply. My apologies for not having the time to do this earlier. I've done everything you've said. However, the ASACPI.sys file is date stamped for 2011. I hope this is fine as well.

Fingers crossed this fixes my BSOD issues. If not, I'll be back posting :) Thanks again.
My System SpecsSystem Spec

06 Feb 2011   #4

Windows 7 Home, 64 bit

Well the BSOD's keep on coming I've had 4 in the past 24 hours. All different ones from what was occuring earlier. In the dump file, I do not know how to filter out the older BSOD's contained in the first post. The new BSOD's have all occured on the 5th and 6th and there is 4 in total.
My System SpecsSystem Spec
10 Feb 2011   #5

Windows 7 Home, 64 bit

My System SpecsSystem Spec
20 Jan 2012   #6

Windows 7 Ultimate 64bit

Same problem here. Before and after clean Install OS.
Sometimes when try to restart or shut down but after that I shut down normal.
BSOD Code: 3b
Caused by Driver: dxgkrnl.sys
Caused by Adress: dxgkrnl.sys+2756

Are you resolve your problem and how???
My System SpecsSystem Spec

 BSOD - After clean install

Thread Tools

Similar help and support threads
Thread Forum
Clean install more BSOD than before
I'm getting a lot of BSOD. Hopefully the log files will help. Driving me crazy. I just replaced the hard drive as it failed diagnostics.
BSOD Help and Support
Various BSOD after clean install
Please Help I have had to re install Windows 7 64 bit today on a clients PC. Since the install has completed i have had various BSOD including SYSTEM_SERVICE_EXCEPTION NTFS_FILE_SYSTEM and just now BAD_POOL_HEADER
BSOD Help and Support
BSOD 41(63), Second clean install
Win7 Pro x86 (32-bit) Original installed OS OEM Age of system (hardware): 2010 December Age of OS installation: Two days I did complete SFC /SCANNOW without any errors. I've run a diagnostic on the memory that didn't turn up anything and my case is running cool. I have several others from...
BSOD Help and Support
Clean Install BSOD
Hi folks, Just did a clean install of Win 7 pro edition, 64 bit on my machine. Came home to find, 'my system has recovered from an unexpected shut down...' On the clean install I have made sure to update all mobo drivers as well as graphics card drivers so I think I am up to date there. ...
BSOD Help and Support
BSOD even after clean install
Sorry if this has been posted before but I get the BSOD randomly I've attached the minidump file If someone can help I truly would appreciate it I've tried uploading the zip file don't know why it isn't here? thank you!
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:04.
Twitter Facebook Google+