Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD part 3

18 Feb 2011   #21

Windows 7 Ultimate x64 Full Retail SP1

Funny you should ask. Go boom again. dump files attached. I have a 2nd HDD with perhaps a marginal SATA connection (broke the plastic bits on the HDD during system upgrade). The cable is making contact, I can read the drive, but it's held together with duct tape. I don't have any OS stuff on that drive, I use it for storage (patches, pictures and so forth). I've copied it all off to my primary HDD so as not to lose it. Might be a problem?
Edit: Blew up a couple of more times, I upgraded my Netgear adapter driver but it's still 11/2009 (should be good for Win7, or so I've been told)

My System SpecsSystem Spec
21 Feb 2011   #22

Windows 7 Ultimate x64 Full Retail SP1

Blew up again a couple of times yesterday. I ordered a new HDD and I'm going to disconnect the existing one until it arrives. Phooey. Anyone have time to look at my last jcgriff?
My System SpecsSystem Spec
23 Feb 2011   #23

Windows 7 Ultimate x64 Full Retail SP1

replaced the drive. Still blowing up all over the place. I'm going to start a new thread, mods please close this one. thanks,

My System SpecsSystem Spec


 BSOD part 3

Thread Tools

Similar help and support threads
Thread Forum
BSOD USB 3.0 second part...
Hi, this is the second part of calvary I've been going through. The quick story is in link belove: But I will write it here in short, HP ProBook 4440s (altho it was 4540s before...
BSOD Help and Support
System Part and Boot Part Diff Drives. Want to Align SYS and BOOT
Alright here is my issue as best as I can explain it. I have two drives, one with a system partition one with my boot. The one with the boot is the drive I want to use as my primary. I want to format the drive with the system partition. How can I move the sys partition to the boot drive so that...
Installation & Setup
BSoD Part 2: The Return
Greetings, everyone: The story so far: Back in August I built a PC. O, la, la. It was working great, except for one small problem. If I ever shut the PC down for a few hours (or over night), it would never let me have a clean boot. It will load me to Windows, give me about 5 minutes, then...
BSOD Help and Support
BSOD, part 2
I thought I was out of the woods and then the darned 'puter started spitting out BSODs again. Dump attached. Did I mention that after 23 years of PC problems, I'm finally getting really, um, upset? Phooey
BSOD Help and Support
[BSOD] Which Hardware part is it?
Hi I have some strange issues with my computer I have my computer since 20months, since I build it I have some BSODs while gaming or watching video. Yesterday I bought new RAM which is official supported from the mainboard. After I replaced my old RAM with it I had MORE Bluescreens (3...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:26.
Twitter Facebook Google+