Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Troubleshooting BSOD Loop

08 Feb 2011   #1
rougespook

Windows 7 Ultimate x64,
 
 
Troubleshooting BSOD Loop

For the past couple of days I have been dealing with a BSOD stop issue, Currently I am unable stop the system from restarting on an error so the system is caught in a loop. The loop occurs in Safe Mode as well as Normal Mode. I am only able to get pieces of error information. The one test I was able to run once was a memory error scan which came back with zero errors.


Error: IRQL_NOT_Less_Than_Equal


Stop Error: 0x00000001e


OS Version: 6.1.7600.2.0.256.1


BCCode: 1e
BC1: 0000000000
BC2: 0000000000
BC3: 0000000000
BC4: 0000000000


I have not made any hardware changes however, here are the two software changes. In my research it appears that these software changes may be a source of my problem.


  1. I uninstalled ISObuster
  2. Added a significant number of MP3 to my iTunes




I am not sure what my next step would be. I am unable to boot the system in any mode. I am not sure if any of the tools on UBCD would help me in my current situation so I could continue to gather data. Is there a tools boot CD & boot USB image that could be used in this situation.


Thank you.


My System SpecsSystem Spec
.
08 Feb 2011   #2
DeanP

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

My System SpecsSystem Spec
08 Feb 2011   #3
rougespook

Windows 7 Ultimate x64,
 
 

Thank you. I ran it three times before posting to the forum. After reading your reply I ran it another three times without success.

What should my next step be?
My System SpecsSystem Spec
.

08 Feb 2011   #4
DeanP

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

Go to Command Prompt in Startup Repair and do the following commands..

bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
chkdsk
My System SpecsSystem Spec
09 Feb 2011   #5
rougespook

Windows 7 Ultimate x64,
 
 

Thank you. I have run all the commands.
I received a message saying that this system could not be repaired automatically.
While viewing the diagnosis and repair details the only error I could locate states the following:
Unspecified changes to system configuration might have caused the problem. Error code = 0x1f
My System SpecsSystem Spec
09 Feb 2011   #6
DeanP

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

Try system restore and restore to a point before the problem started.
My System SpecsSystem Spec
09 Feb 2011   #7
rougespook

Windows 7 Ultimate x64,
 
 

I have tried that without success as well.

I was looking at building a USB drive with tools on it. I noticed a BootMgr error. Digging a little deeper, I ran bootrec/RebuildBcd and it came up to say that there are 0 Windows installations identified. Does that I mean that the damage is so great that I have to do a complete reinstall of Windows 7?

Thank you
My System SpecsSystem Spec
09 Feb 2011   #8
rougespook

Windows 7 Ultimate x64,
 
 

Would it be beneficial for me to run something like Ultimate Boot CD to run a registry scan / repair?

My second question is how can the software inform me that it cannot find a windows installed on the hard drive while I am in the Windows repair menu? I am confused about this.

Thank you.
My System SpecsSystem Spec
10 Feb 2011   #9
rougespook

Windows 7 Ultimate x64,
 
 

I have downloaded the Win 7 repair disc and run it without success.

It stops during the process of restoring files.
It halts when dealing with Evernote 3.5. I have tries multiple restore points with the same result.

Thank you.
My System SpecsSystem Spec
10 Feb 2011   #10
DeanP

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

I'll grab an Installation and Partition expert because I'm no good with this.
My System SpecsSystem Spec
Reply

 Troubleshooting BSOD Loop




Thread Tools




Similar help and support threads
Thread Forum
BSOD 0x124 on first build. Troubleshooting my brains out
Thanks for helping me, in advanced. This is my first build, and my first time coming to a forum for help. Build- Gigabyte GA-Z77x-d3H Samsung 840 SSD Corsair Vengeance 2 x 4gb Using the mb's graphics, Intel HD 4000 600 watts Looks like 0x124, hal.dll +12a3b, ntoskral.exe 18c443 I am a...
BSOD Help and Support
BSOD Loop, nothing works and is in a constant loop
Hi everyone, I have a Sony VAIO vpcEB4L1E.chk Laptop, with a 500 GB HDD , with a Intel core i3-380m processor / 2.53 GHz,with 4GB RAM, running on Windows 7 home premium 32 bit. Until recently the laptop has been working fine, but all of a sudden it's stopped working. In its simpliest form, the...
BSOD Help and Support
BSOD Troubleshooting
I have been experiencing several BSOD's over the last month or two. Initially I thought my video card was to blame but now I'm not so sure. Most of my dumps pointed to a bad image or seemed to be memory corruption. I've run memtest86 several times on the memory and no errors have come back. I...
BSOD Help and Support
BSOD troubleshooting assistance sought
Esteemed Counselors, This is a new system experiencing repeated and seemingly random bsods. For instance, it will blue screen while sitting idle. I replaced the c: drive, installed win7 64-bit, updated the bios and all drivers to the very latest as far as I can ascertain. I ran memtest86+,...
BSOD Help and Support
5 Months of BSOD troubleshooting - please help end my misery!
Summary: Bought Powerspec G158 from Microcenter, immediately upgraded HDD and Graphics card, have been experiencing BSOD (0x0000003b or 0x0000001e -- about 1 every 6 hours) for 5 months despite relentless troubleshooting. I’m at my wits end, appreciate any help or suggestions you can offer. ...
BSOD Help and Support
Random BSoD, Need help troubleshooting
Hey, I just put together a new rig and its been giving me random BSoD errors. I've tried updating all my drivers and I believe most, if not all of them are current. I tried to use verifier.exe to see what was going wrong and it came out with errors for gdrv.sys which is a driver for the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:58.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App