Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD, Help needed!

09 Feb 2011   #1

windows 7 32
BSOD, Help needed!

Any help is greatly appreciated!

Was unable to get the perfmon /report...

Windows 7 x64
7 months old laptop.

If you need anything else please let me know thanks!

My System SpecsSystem Spec
09 Feb 2011   #2
Microsoft MVP


SPLDR is listed in the problem devices in the MSINFO32 report. At work this is usually an indication that the system is infected. Please do the following:
I suggest starting all troubleshooting with the following diagnostic tests. They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:
H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
HD Diagnostic (read the details at the link)

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Scanners (read the details at the link)
Please uninstall Catalyst Control Center. If you absolutely must have the program, then download and install a fresh copy AFTER uninstalling the current version.

Please do the following with your Norton Internet Security (this isn't essential, but we'll have to do it if all the other stuff doesn't fix it):
Anti-Virus Removal:
Please do the following:
- download a free antivirus for testing purposes: Free AntiVirus
- uninstall the Norton from your system (you can reinstall it, if so desired, when we're done troubleshooting)
- remove any remnants of Norton using this free tool: KB Article Not Found
- IMMEDIATELY install and update the free antivirus
- check to see if this fixes the BSOD's
- Please update these drivers from the device manufacturer's website.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Windows Update exceptions may be noted below for Windows drivers:


TVALZ_O.SYS  Mon Jul 13 22:19:26 2009 (4A5BEB2E)
TOSHIBA ACPI-Based Value Added Logical and General Purpose Device Driver 

AtiPcie.sys  Tue May 05 11:00:22 2009 (4A005486)
ATI PCIE Driver for ATI PCIE chipset 

SRTSPX64.SYS Wed Dec 02 00:58:24 2009 (4B160200)
Symantec Real Time Storage Protection (PEL) x64 

pgeffect.sys Mon Jun 22 05:00:11 2009 (4A3F481B)
Toshiba Universal Camera Filter driver/Pangu Effect driver 

atikmpag.sys Mon Mar 15 10:00:57 2010 (4B9E3D99)
ATI Video driver (remove the Catalyst Control Center and only install the Display Driver) 

SynTP.sys    Wed Mar 10 21:02:01 2010 (4B984F19)
Synaptic Touch Pad Driver 

TVALZFL.sys  Fri Jun 19 06:05:44 2009 (4A3B62F8)
TVALZ Filter Driver - Toshiba 

QIOMem.sys   Mon Jun 15 01:58:48 2009 (4A35E318)
TOSHIBA Generic IO & Memory Access 

atipmdag.sys Mon Mar 15 10:40:07 2010 (4B9E46C7)
ATI Video driver (remove the Catalyst Control Center and only install the Display Driver) 

rtl8192se.sys Mon Apr 26 13:23:06 2010 (4BD5CBFA)
Realtek Wireless LAN 802.11n PCI-E NIC NT Driver 

L1C62x64.sys Mon Feb 22 04:51:51 2010 (4B8253B7)
Atheros NIC driver 

tdcmdpst.sys Thu Jul 30 04:39:35 2009 (4A715C47)
Toshiba ODD Writing Driver (CD/DVD) 

CHDRT64.sys  Mon Feb 01 12:14:34 2010 (4B670BFA)
Conexant HD Audio Driver 

If this doesn't work, then we'll have to try Driver Verifier according to these directions:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like. From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:
Delete these registry keys (works in XP, Vista, Win7):
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel
More info on this at this link: Using Driver Verifier to identify issues with Windows drivers for advanced users
Two of the dump files wouldn't run - here's the one that did run:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sun Feb  6 17:15:36.688 2011 (UTC - 5:00)
System Uptime: 0 days 0:00:48.514
Probably caused by : msrpc.sys ( msrpc!LRPC_CASSOCIATION::OpenSecurityContext+118 )
PROCESS_NAME:  WerFault.exe
FAILURE_BUCKET_ID:  X64_0xA_msrpc!LRPC_CASSOCIATION::OpenSecurityContext+118
Bugcheck code 0000000A
Arguments 00000000`00000090 00000000`00000002 00000000`00000000 fffff800`02a87995
My System SpecsSystem Spec

 BSOD, Help needed!

Thread Tools

Similar help and support threads
Thread Forum
BSOD. help needed. thanks.
Is Windows 7 . . . - x64 - the original installed OS on the system? what i'm using - an OEM or full retail version? OEM - What is the age of system (hardware)? around 10 months
BSOD Help and Support
BSOD Help needed!
Ok so I bought this new computer for Christmas and I've been have BSOD problems, it happens randomly and is extremely frustrating. I've tried re-installing windows 7 and updating all drivers but nothing seems to help. I have also ran memtest for over 8 tests and found no errors. I had a previous...
BSOD Help and Support
BSOD Help needed!
Ok so I bought this new computer for Christmas and I've been have BSOD problems, it happens randomly and is extremely frustrating. I've tried re-installing windows 7 and updating all drivers but nothing seems to help. I have also used memtest and found no errors.
BSOD Help and Support
My first BSOD.. help needed :(
I was playing Battlefield Bad Company 2 for few hours without a problem, then suddenly my monitor goes black and I got bluescreen on my face. The event viewer raport says that it is my CPU which caused the error (code x124). I have overclocked my CPU from 3,4 to 3,8GHz and it has passed prime95...
BSOD Help and Support
BSOD help needed
Hi, I've installed Windows 7 32 and all is working fine apart from 1 problem and that is when I switch user. I can log off user, and log onto different users but if I switch users it Blue screens and says error code 0x0000008e and creates and mem dump file. I have looked into this and...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 07:27.
Twitter Facebook Google+