Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after fresh Win7 Install

18 Feb 2011   #11
Porkstorm

Win 7 Professional 64bit
 
 

Quote   Quote: Originally Posted by DeanP View Post
What anti virus are you running?

Also I would test the RAM with Memtest86+
Using Microsoft Security Essentials, currently. I did run Memtest86+ for about 3 hours with no issues found, and I am currently re-scanning with the SFC /scannnow to see if it has any issues.

I booted from CD rom with Memtest86+ iso and let that run, that's the correct procedure yes?


My System SpecsSystem Spec
.
18 Feb 2011   #12
DeanP

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

Yes, that's the correct procedure.
Could you enable Driver Verifier?
Driver Verifier - Enable and Disable

Restart the computer when Verifier is on. It will cause BSOD - because it is finding and stressing the faulty driver. Give couple of BSOD. Then go to Safe Mode - turn it off. Reboot into normal mode and upload the Verifier dumps.
My System SpecsSystem Spec
18 Feb 2011   #13
Porkstorm

Win 7 Professional 64bit
 
 

Quote   Quote: Originally Posted by DeanP View Post
Yes, that's the correct procedure.
Could you enable Driver Verifier?
Driver Verifier - Enable and Disable

Restart the computer when Verifier is on. It will cause BSOD - because it is finding and stressing the faulty driver. Give couple of BSOD. Then go to Safe Mode - turn it off. Reboot into normal mode and upload the Verifier dumps.
Okay, I enabled it as per the steps you linked, and I will restart a few times and (hopefully) return with some information.
My System SpecsSystem Spec
.

18 Feb 2011   #14
Porkstorm

Win 7 Professional 64bit
 
 

Alright. After enabling the verifier.exe as per the settings you linked, I've restarted my system 3 times. No BSODs have occurred thus far...?
My System SpecsSystem Spec
18 Feb 2011   #15
DeanP

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

Wait at least 36 hours for BSOD to occur. If it doesn't occur, you do not have any faulty drivers.
My System SpecsSystem Spec
19 Feb 2011   #16
Porkstorm

Win 7 Professional 64bit
 
 

I will do that. The only reason I asked is that somewhere I read that the verifier would actually *cause* a BSOD.

How do I find the verifier log when a BSOD happens?

Also, thank you again for all of the assistance
My System SpecsSystem Spec
19 Feb 2011   #17
reventon

Windows 7 x64, Windows XP SP3, Fedora
 
 

Quote   Quote: Originally Posted by Porkstorm View Post
I am unsure of how to find the logs that the Driver Verifier is supposed to make for the BSOD crashes... so that I can upload them and make sense of what is crashing.
Blue Screen of Death (BSOD) Posting Instructions - Windows 7 Forums
My System SpecsSystem Spec
19 Feb 2011   #18
Porkstorm

Win 7 Professional 64bit
 
 

Alright. I've:
1. Uninstalled Malwarebytes
2. Enabled Driver Verifier
3. Run Memtest86+ for a few hours (with no issues found)
4. Updated Drivers
5. Run the /scannow checker multiple times (with no issues found)

And I have just received another BSOD.

How do I find/upload the logs that Driver Verifier keeps for the BSOD crashes so that I am able to upload it?
My System SpecsSystem Spec
19 Feb 2011   #19
Porkstorm

Win 7 Professional 64bit
 
 

OKay, here's my new BSOD report.

Rank Check Disk last night, it restarted before I could see if it had any errors.

Also, ran Memtest86+ overnight, 0 errors. Do I need to test each stick individually if the test doesn't find any issues when running it with my normal setup?
My System SpecsSystem Spec
19 Feb 2011   #20
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Porkstorm View Post
OKay, here's my new BSOD report.

Rank Check Disk last night, it restarted before I could see if it had any errors.

Also, ran Memtest86+ overnight, 0 errors. Do I need to test each stick individually if the test doesn't find any issues when running it with my normal setup?
Driver verified Saitek Hid Driver Version : 6.2.2.4 (your sailH8000.sys).

Yours is dated 4/2008 so way too old. Remove or update

How To Find Drivers:
Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.
- - The most common drivers are listed on this page: Driver Reference Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\021911-14851-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Machine Name:
Kernel base = 0xfffff800`02a07000 PsLoadedModuleList = 0xfffff800`02c44e50
Debug session time: Sat Feb 19 03:35:59.840 2011 (GMT-5)
System Uptime: 0 days 1:50:22.759
Loading Kernel Symbols
...............................................................
................................................................
.........................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C4, {f6, 528, fffffa8004b8ab30, fffff88002b66234}

Unable to load image \SystemRoot\system32\DRIVERS\SaiH8000.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SaiH8000.sys
*** ERROR: Module load completed but symbols could not be loaded for SaiH8000.sys
Probably caused by : SaiH8000.sys ( SaiH8000+26234 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
A device driver attempting to corrupt the system has been caught.  This is
because the driver was specified in the registry as being suspect (by the
administrator) and the kernel has enabled substantial checking of this driver.
If the driver attempts to corrupt the system, bugchecks 0xC4, 0xC1 and 0xA will
be among the most commonly seen crashes.
Arguments:
Arg1: 00000000000000f6, Referencing user handle as KernelMode.
Arg2: 0000000000000528, Handle value being referenced.
Arg3: fffffa8004b8ab30, Address of the current process.
Arg4: fffff88002b66234, Address inside the driver that is performing the incorrect reference.

Debugging Details:
------------------


BUGCHECK_STR:  0xc4_f6

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP

PROCESS_NAME:  dxdiag.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff80002f023dc to fffff80002a77740

STACK_TEXT:  
fffff880`07329de8 fffff800`02f023dc : 00000000`000000c4 00000000`000000f6 00000000`00000528 fffffa80`04b8ab30 : nt!KeBugCheckEx
fffff880`07329df0 fffff800`02f17ae4 : 00000000`00000528 fffffa80`04b8ab30 00000000`00000004 fffff980`239f6000 : nt!VerifierBugCheckIfAppropriate+0x3c
fffff880`07329e30 fffff800`02cd2030 : ffffffff`ffffffff fffff880`0732a080 fffff880`0732a200 fffff880`0732a408 : nt!VfCheckUserHandle+0x1b4
fffff880`07329f10 fffff800`02d503b5 : 00000000`00000000 fffff800`00000001 fffffa80`0461a3c0 fffff6fc`40015b00 : nt! ?? ::NNGAKEGL::`string'+0x20b4e
fffff880`07329fe0 fffff800`02a76993 : fffffa80`047066e0 fffff880`0732a398 00000000`00000002 fffff880`0732a420 : nt!NtQueryValueKey+0x115
fffff880`0732a170 fffff800`02a72f30 : fffff800`02f06c86 fffff880`02b66234 fffff880`0732a408 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
fffff880`0732a378 fffff800`02f06c86 : fffff880`02b66234 fffff880`0732a408 00000000`00000000 00000000`00000000 : nt!KiServiceLinkage
fffff880`0732a380 fffff880`02b66234 : fffff880`0732a4d0 fffff880`0732a538 fffff880`0732a4d0 fffff800`02b7f1c2 : nt!VfZwQueryValueKey+0x76
fffff880`0732a3d0 fffff880`0732a4d0 : fffff880`0732a538 fffff880`0732a4d0 fffff800`02b7f1c2 00000000`0000000c : SaiH8000+0x26234
fffff880`0732a3d8 fffff880`0732a538 : fffff880`0732a4d0 fffff800`02b7f1c2 00000000`0000000c fffff880`0732a400 : 0xfffff880`0732a4d0
fffff880`0732a3e0 fffff880`0732a4d0 : fffff800`02b7f1c2 00000000`0000000c fffff880`0732a400 00000001`082f3963 : 0xfffff880`0732a538
fffff880`0732a3e8 fffff800`02b7f1c2 : 00000000`0000000c fffff880`0732a400 00000001`082f3963 fffff800`00080006 : 0xfffff880`0732a4d0
fffff880`0732a3f0 00000000`00000000 : fffff880`0732a1b0 fffffa80`00000040 00000000`00000000 00000000`00000000 : nt!MmAllocateSpecialPool+0x722


STACK_COMMAND:  kb

FOLLOWUP_IP: 
SaiH8000+26234
fffff880`02b66234 488b4c2440      mov     rcx,qword ptr [rsp+40h]

SYMBOL_STACK_INDEX:  8

SYMBOL_NAME:  SaiH8000+26234

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: SaiH8000

IMAGE_NAME:  SaiH8000.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  47f6106a

FAILURE_BUCKET_ID:  X64_0xc4_f6_VRF_SaiH8000+26234

BUCKET_ID:  X64_0xc4_f6_VRF_SaiH8000+26234

Followup: MachineOwner
---------
My System SpecsSystem Spec
Reply

 BSOD after fresh Win7 Install




Thread Tools




Similar help and support threads
Thread Forum
BSOD even after fresh install of Win7
Been getting this BSOD randomly. Thought was the vga card as computer would not wake up the next morning after being on all night. And computer would not POST once, only worked when took out vga card and used onboard video. I've since purchased and installed a new vga card. And reinstalled windows...
BSOD Help and Support
BSOD fresh win7-64 install 0x00000124
Hello, Yesterday I bought new PC, and the problem start when I try to install OS. I have legel key but no disc, so I download win7 64-bit ultimate from digitalriver serwers, create bootable iso and install system. Then it started constantly crashes when I try to install drivers or copy big...
BSOD Help and Support
BSOD on a fresh install (win7 pro 64 bit)
I am getting plagued by BSoDs on a fresh (installed yesterday) install of windows 7 pro 64-bit. This is the second time that windows 7 was installed on this system. The first was also plagued by BSoDs any help would be greatly appreciated Is Windows 7 . . . - x86 (32-bit) or x64 ? ...
BSOD Help and Support
BSoD, fresh install, win7 enterprise
Hello Please help me with my blue screen of death issues. All info is included in the attached files. Thank you
BSOD Help and Support
BSOD on fresh install of Win7
Well, I guess I wasn't as lucky as I thought. 5 days then boom. dump files attached. Dammit. :mad:
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:29.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App