Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: constant BSOD

05 Mar 2011   #21
Jonathan_King

Windows 7 Professional x64
 
 

Wish your friend a quick recovery from us. Good luck with the RAM change!


My System SpecsSystem Spec
.
05 Mar 2011   #22
dcrewchief

Windows 7 Home Premium X64
 
 

If you have more than memory card installed try removing one and see if fixes problem. its quick easy way to troubleshoot.
My System SpecsSystem Spec
28 Apr 2011   #23
kaos2011

64bit Windows 7 Enterprise
 
 

Ok new ram come and put this in pc . Still gt bsod... also the pc locks up with the 2 new ram in slots 1 n 2 and so dies the original ram tht was nt changed .. seems the 4 ram I hve locks up even with one stck in ... any ideas

Sorry for long delay
My System SpecsSystem Spec
.

28 Apr 2011   #24
Jonathan_King

Windows 7 Professional x64
 
 

Could we get info on this?

PSU - brand/wattage
motherboard - model
RAM - model
My System SpecsSystem Spec
29 Apr 2011   #25
kaos2011

64bit Windows 7 Enterprise
 
 

Psu is 400w
Motherboard is asus m4a88t-m /usb3
Ram are all 2gb sticks
2 are g series ram 2x2gb ddr3 1333mhz .( 7-7-7-20)
2 are unbranded... these were changed same as above
Also remember it crashed with one stick in and 2 sticks from the same pack
CPU is a huge thing quad core. Nt sure of makecsince I cnt get on my pc much . Using my phone to use forums
My System SpecsSystem Spec
29 Apr 2011   #26
kaos2011

64bit Windows 7 Enterprise
 
 

I think the brand is Atx or Cic or something .. sorry lol
My System SpecsSystem Spec
29 Apr 2011   #27
Jonathan_King

Windows 7 Professional x64
 
 

Try removing the video card for now; take it out of your machine and use the onboard graphics instead. This will help reduce power usage. When done, take out all RAM sticks except for one of the new ones. With just that one stick installed, run Memtest86 for 7 passes or until it errors (whichever comes first). If you get no errors after 7 passes, move that stick to the next motherboard slot over, and repeat the process until that stick has been tested in all slots.

Repeat with the other stick of new RAM as well.
My System SpecsSystem Spec
30 Apr 2011   #28
kaos2011

64bit Windows 7 Enterprise
 
 

Wat test number is best ?
My System SpecsSystem Spec
30 Apr 2011   #29
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

If you got a lot of errors, on any test, just run the normal Memtest86+, if you get any errors you can stop the test.
Let us know the results.


D/L CPUZ and post a snip of the CPU, Mainboard, Memory, and SPD tabs.

For posting the information , enter 'Snipping tool' in the Start button > Search box, hit enter. Select the area you want to post and save to a convenient place.
How to Post a Screenshot in Seven Forums

The CPUZ tabs will tell you the details about your RAM, you need to check if it is compatible with your system and the timings and settings are correct.

Go to your BIOS and tell us what the CPU, RAM and the CPU integrated memory controller voltages are.
My System SpecsSystem Spec
01 May 2011   #30
kaos2011

64bit Windows 7 Enterprise
 
 

Ok doing.this now . I'm in slot 3 so far no errors . Slot 1 and 2 went fine with no errors but when I have had one ram stick in the first slot before I had the blue screen n lock ups. It's about 3 hours for 7 passes so will post again when I done the last slot and the other bits of info u want
My System SpecsSystem Spec
Reply

 constant BSOD




Thread Tools




Similar help and support threads
Thread Forum
[BSOD] laptop constant random bsod's (IRQL_NOT_LESS_OR_EQUAL)
Laptop brand: Acer Model: Aspire 5560-sb653 OS: Windows 7 Home 64 bit Problem: Started 2 days ago. I was checking my email using Firefox and a "Display driver stopped working/ successfully recovered" message popped up, followed by first BSOD. After that, BSOD appeared at start-up. Tried...
BSOD Help and Support
bsod constant errors, restarting ,multiple bsod
pls solve and send me the solution to this .i have been experiencing this since i bought my pc since a long time.
BSOD Help and Support
Constant BSOD.
Hey there, I've been getting constant crashes and BSOD.. I've managed to get on, and get the dump. Any help would be appreciated. Thank you!
BSOD Help and Support
Constant Crashing, constant BSOD's
Alright, so the situation has gotten worse, a few weeks back I made a thread and someone advised me to remove Daemon/Alcohol 120 and then remove the leftovers using a specific tool, and it seemed to be fine for a while, but now my computer is starting to crash full force. I was just playing...
BSOD Help and Support
COnstant BSOD's
Ok let me start by saying ty for any help provided I built this system 6 months ago, and I did not have any problems with it until recently. The problems started after I did a format and reinstalled windows 7 about 4 weeks ago. The computer BSOD's randomly even if it is just sitting there...
BSOD Help and Support
Constant BSOD
Hi, Ive built a system up by myself and have had intermittent BSODs since ive started it up. I replaced the wireless adaptor card and things seemed to calm down. I would get a BSOD rarely, but not enough to worry. Ive recently uninstalled Norton Antivirus which came with one of the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:33.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App