Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Blue Screen of Death - A clock interrupt was not received on a seconda

05 Mar 2011   #11
yowanvista

Windows 10 Pro x64, Arch Linux
 
 

Quote   Quote: Originally Posted by randellfarrugia View Post
how do I find out which hardware is failing ? I have run stress tests for each component and they all returned with no errors
The only way is to test each component but since no errors were reported your should update your BIOS. Are the BSODs occurring in safe mode?


My System SpecsSystem Spec
.
05 Mar 2011   #12
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

Quote   Quote: Originally Posted by yowanvista View Post
Quote   Quote: Originally Posted by randellfarrugia View Post
For some reason the mini dump folder is empty, I have ccleaner installed but I haven't used it since last week or two weeks ago maybe

Quote   Quote: Originally Posted by yowanvista View Post
This BSOD is usually caused by an outdated BIOS or a defective CPU
https://www.sevenforums.com/crashes-d...tml#post356791
STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg

Go to your motherboard's website and check your version of your BIOS. See if there are any problems you are having that are solved by a a later version. I do not often recommend flashing the BIOS because there is a risk involved. If there is problem addressed by a BIOS that applies to your computer, consider flashing your BIOS to the latest version. If you choose to do this, flash you BIOS outside of Windows.

Run Prime 95 again to test your CPU and your ram. Carefully the instructions in this tutorial:
CPU - Stress Test with Prime95. Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs). Post back with your results.

There are no dump files in your attachment, did you run a system cleaner(such as Ccleaner) after the crashes?
Then its hardware failure, run the test linked above
@yowanvista
thanks great advice
My System SpecsSystem Spec
05 Mar 2011   #13
randellfarrugia

Windows 7 Home Premium 64 bit
 
 

The Blue screen only happened once today, and it was in normal boot but it has been freezing a lot lately

Quote   Quote: Originally Posted by yowanvista View Post
Quote   Quote: Originally Posted by randellfarrugia View Post
how do I find out which hardware is failing ? I have run stress tests for each component and they all returned with no errors
The only way is to test each component but since no errors were reported your should update your BIOS. Are the BSODs occurring in safe mode?
My System SpecsSystem Spec
.

05 Mar 2011   #14
randellfarrugia

Windows 7 Home Premium 64 bit
 
 

i'm sorry for this maybe a dumb question, but if it is a bios problem than how come it hasn't ever done this before ?
I've been using this pc for 1 year, 4 months
My System SpecsSystem Spec
05 Mar 2011   #15
randellfarrugia

Windows 7 Home Premium 64 bit
 
 

hey, i'm still running prime95 and i happened to notice that my 12V is running at 11.6V
should i be worried ? or is it normal ?

Also, I happened to be browsing through my windows files and found this : WD-20110218-2203.dmp

I don't know what it is exactly. the date is 18/02/2011 so it can't be about today's blue screen
I've attached it anyway, in case someone here knows what it means and could help me.
My System SpecsSystem Spec
05 Mar 2011   #16
randellfarrugia

Windows 7 Home Premium 64 bit
 
 

help.. someone ? please
My System SpecsSystem Spec
05 Mar 2011   #17
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

Perform a SFC Scan

1. Click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow

2. Type the following command, sfc /scannow and then press ENTER:

(A message will appear stating that 'The system scan will begin'. Be patient because the scan may take some time)

3. If any files require a replace SFC will replace them. You may be asked to insert your Windows 7 DVD for this process to continue

4. If everything is okay you should, after the scan, see the following message "Windows resource protection did not find any integrity violations"

5. After the scan has completed, close the command prompt window, restart the computer. (TIP repeat scan several times)


IF YOU CAN NOT RUN IT IN DESKTOP MODE SEE ALSO >> How to Check / Repair the Windows System Files from a Command Prompt at Boot >>> SFC /SCANNOW : Run in Command Prompt at Boot

SEE ALSO >>> http://support.microsoft.com/kb/929833
My System SpecsSystem Spec
05 Mar 2011   #18
randellfarrugia

Windows 7 Home Premium 64 bit
 
 

I did the scan.

"Verification 100% complete.

Windows Resource Protection did not find any integrity violations
My System SpecsSystem Spec
05 Mar 2011   #19
randellfarrugia

Windows 7 Home Premium 64 bit
 
 

/bump

after 3 hrs testing prime 95 did not find any errors..


It's kind of ironic how disappointed I am that no errors have been found yet
My System SpecsSystem Spec
05 Mar 2011   #20
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

did you run it more than once?( 5. After the scan has completed, close the command prompt window, restart the computer. (TIP repeat scan several times) also follow what yowanvista has advised.
My System SpecsSystem Spec
Reply

 Blue Screen of Death - A clock interrupt was not received on a seconda




Thread Tools




Similar help and support threads
Thread Forum
BSOD, a clock interrupt was not received
on a secondary interrupt. I had this problem before, but was solved with changing power settings. But since the last update of tuesday from Windows, the problem reoccurs. I tried to change the power settings, but the problem persists. Can anyone help. Thanks in advance
BSOD Help and Support
BSOD, a clock interrupt was not received
Getting random BSOD on my pc, I think its my processor but I am not 100% sure. Sometimes it happens when im gaming, but I have also had it happen when I just boot up and open 1 window in chrome. Also sometimes programs randomly just close and instead of getting a BSOD the computer will just shut...
BSOD Help and Support
STOP 0x00000101: A clock interrupt was not received
Hi I have been using Windows 7 Home Premium from my HP dv6 laptop for long without any issue. 2 weeks ago I installed some driver update tool, and updated the drivers, on the same day I also updated Windows. Then I started receiving BSOD, saying STOP 0x00000101: A clock interrupt was not...
BSOD Help and Support
A clock interrupt was not received on a second processor
ive been getting these BSOD'S quite frequently i think i may need a new cpu or ram plz help
BSOD Help and Support
A clock interrupt was not received on the secondary processor
From time to time im having blue screen crash Heres what it says : ImageShack® - Online Photo and Video Hosting Its new pc so it really bothers me whats wrong.
BSOD Help and Support
Clock Interrupt not received and hyperthreading
First my computer details: HP Pavilion e9150t Core i7-920, 2.66 ghz 8 Gb DDR-3 nVidia GeForce 220 w/1 Gig Hauppauge WinTV HVR-1800 Soundblaster x-fi extreme Windows 7 Ultimate 64-bit I've had an ongoing blue screen problem whenever I was playing back video. This was both internet based...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 00:43.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App