Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD on newly built PC (0x24, 0x7E, 0x1A)

10 Mar 2011   #1

Windows 7 Ultimate x64
BSOD on newly built PC (0x24, 0x7E, 0x1A)

I have been facing this problem ever since I first assembled my pc. I am not an expert but I don't think I have messed my hardware. The PC is 10 days old.
I am not sure but maybe there is some sort of incompatibility with my hardware and Win7.
I am currently running Win7 Ultimate x64. My pc spec are as follow:
MoBo: GA-X58A-UD5 (Link)
CPU: Intel i7 970 (Link)
RAM: G.Skill 8GB (2x4GB) (Link)
GPU: Nvidia GTX 580 (Link)
PSU: Corsair TX950 (Link)
SSD: Crucial C300 128GB (Link)
HDD: WD Caviar Black 1TB (Link)
Optical Drive: LG Blu-ray (Link)

As for my Win7 installations, I did about 3 clean installations on my SSD. Last one was yesterday.
I really need to know if I am having incompatibilities with my hardware or am I facing driver errors.
I attached the log of my BSODs, the last three happened while I was trying to install Win7 SP1.
I will try a CHKDSK

My System SpecsSystem Spec
10 Mar 2011   #2

Microsoft Community Contributor Award Recipient

Windows 7 x64

Well they are file system errors.
Have you looked for new firmware for you ssd? Product Downloads - Firmware Updates
it's apparently at version 6 now.

    If you see NtfsExceptionFilter on the stack then the 2nd and 3rd
    parameters are the exception record and context record. Do a .cxr
    on the 3rd parameter and then kb to obtain a more informative stack
Arg1: 00000000000c08a2
Arg2: 0000000000000000
Arg3: 0000000000000000
Arg4: 0000000000000000

Debugging Details:




PROCESS_NAME:  des2svr.exe


TRAP_FRAME:  fffff880070bb930 -- (.trap 0xfffff880070bb930)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa800c673250 rbx=0000000000000000 rcx=0000000002831000
rdx=0000000002830000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8000338edf2 rsp=fffff880070bbac0 rbp=fffff880070bbca0
 r8=fffffa800d0a9b10  r9=0000000000000155 r10=fffffa800673cc90
r11=000000000012019f r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na po nc
fffff800`0338edf2 0fb602          movzx   eax,byte ptr [rdx] ds:0001:00000000`02830000=??
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff88001210e95 to fffff80003073740

fffff880`070bb3c8 fffff880`01210e95 : 00000000`00000024 00000000`000c08a2 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx
fffff880`070bb3d0 fffff880`01210ae8 : 00000001`00000000 00000000`00000000 00000000`00000000 00000410`00000000 : Ntfs!NtfsPagingFileIo+0x155
fffff880`070bb4d0 fffff880`0101c23f : fffffa80`0abfc570 fffffa80`0abfc260 fffffa80`0c7ef010 00000000`00000000 : Ntfs! ?? ::FNODOBFM::`string'+0x9e89
fffff880`070bb580 fffff880`0101a6df : fffffa80`06fb1990 fffffa80`0abfc260 fffffa80`06fb1900 fffffa80`0abfc260 : fltmgr!FltpLegacyProcessingAfterPreCallbacksCompleted+0x24f
fffff880`070bb610 fffff800`030651f2 : fffffa80`0abfc280 fffffa80`0729a1f0 00000000`00000043 fffff800`031ede80 : fltmgr!FltpDispatch+0xcf
fffff880`070bb670 fffff800`030654f5 : fffffa80`048e6200 fffffa80`048e6200 fffff880`070bb770 fffff800`030abee2 : nt!IoPageRead+0x252
fffff880`070bb700 fffff800`0308e8bb : 00000000`00000000 00000000`00000000 ffffffff`ffffffff fffffa80`098b3740 : nt!MiIssueHardFault+0x255
fffff880`070bb7d0 fffff800`0307182e : 00000000`00000000 fffffa80`0c673250 00000000`02830f00 00000000`00000004 : nt!MmAccessFault+0x14bb
fffff880`070bb930 fffff800`0338edf2 : fffffa80`0c673200 fffff800`00000001 fffffa80`0673cc90 fffffa80`0c673201 : nt!KiPageFault+0x16e
fffff880`070bbac0 fffff800`03072993 : ffffffff`ffffffff 00000000`00000000 00000000`00000000 00000000`00000000 : nt!NtReadFile+0x142
fffff880`070bbbb0 00000000`74f02dd9 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`002ef0f8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x74f02dd9


fffff880`01210e95 cc              int     3


SYMBOL_NAME:  Ntfs!NtfsPagingFileIo+155

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  Ntfs.sys


FAILURE_BUCKET_ID:  X64_0x24_Ntfs!NtfsPagingFileIo+155

BUCKET_ID:  X64_0x24_Ntfs!NtfsPagingFileIo+155

Followup: MachineOwner
My System SpecsSystem Spec
10 Mar 2011   #3

Windows 7 Ultimate x64

I heard one of the firmware updates messes you SSD, so I didnt bother trying to update.
I will try this firmware update, hopefully everything will settle.

Thanks for the advice
My System SpecsSystem Spec

10 Mar 2011   #4

Microsoft Community Contributor Award Recipient

Windows 7 x64

Was this one case of someone complaining or a lot of people?
if a firmware update fails it can cause problems. Failure like that is not very common though.
My System SpecsSystem Spec
10 Mar 2011   #5

Windows 7 Ultimate x64

Well here: RealSSD C300 Series Firmware Version 006 Release - Crucial Community
Some users seem to be having some problems with flashing.
My System SpecsSystem Spec
10 Mar 2011   #6

Windows 7 Ultimate x64

Ok. Just checked my SSD and it seems to have FW 0006 pre-installed. so no need to update.
Can my RAM cause this problem? because it seems to be made for P55 chipsets and I am using X58.

My system crashed, MEMORY_MANAGEMENT 0x1A 10 minutes after reinstalling Norton Internet Security 2011. I guess its causing some problems here.
My System SpecsSystem Spec
10 Mar 2011   #7

Microsoft Community Contributor Award Recipient

Windows 7 x64

Norton does not seem to like certain systems.
You could also have a memory issue though it would explain everything we're seeing here.

RAM - Test with Memtest86+

You'll want to let it run for 5-7 passes, unless it just starts spamming errors right off the bat.
This is usually something I recommend doing overnight.
My System SpecsSystem Spec
10 Mar 2011   #8

Windows 7 Ultimate x64

Alright then, I guess I'll start memtest.

My System SpecsSystem Spec
10 Mar 2011   #9

Windows 7 Ultimate x64

OK. Did memtest and surprisingly, I got around 5000 errors in my first pass.
I guess I will test them 1 by 1.

My bad, 15K Errors and going up.

Tested one stick alone and it spammed error like hell.
Currently testing the other stick, so far so good.
My System SpecsSystem Spec
11 Mar 2011   #10

Windows 7 Ultimate x64

I've been running my pc for hours now using 1 healthy RAM stick without any BSODs.
Guess the problem was with the defective RAM. Going to RMA it.

Can't thank you enough Maguscreed, you saved me a lot of trouble.
My System SpecsSystem Spec

 BSOD on newly built PC (0x24, 0x7E, 0x1A)

Thread Tools

Similar help and support threads
Thread Forum
Lots off BSOD like 0x3b,0x24,0x1a,0X7e,0x50 etc
Started with no reason.. week before i updated graphics card driver. When i ran Memtest86, its shows lots of errors. Is it RAM false and why it started? Thanks to all before!
BSOD Help and Support
BSOD's still rampant 0x1a 0x107e 0x24
Hello Again, Still getting blue screens and massive program crashing and errors, going from indexing to not even able to open the program. BSOD's 0x1a, 0x107e 0x24 Today (aug 22) I swapped out the video card which had been considered the cause of the problem failing all stress tests and in fact...
BSOD Help and Support
BSOD Playing Dota2,Borderlands and other "source" games (0x1a,0x24...)
So... I'm having issues with all kind of BSOD's and Appcrashes. The only thing that i can normaly launch is Half-Life 1 and Counter-Strike 1.6, in all other games sometimes i am getting instant appcrash, sometimes bsod after playing a while. I tried to run "clean" boot , installing...
BSOD Help and Support
Random BSODs. Mostly 0x1A, but also 0x24, 0xE4, 0x19, 0x9F
I had 19 crashes in the past 4 month. A computer is 13 month old, the first BSODs happened on 27/12/2011. The exact statistics: 0x1A MEMORY_MANAGEMENT - happened 10 times (the 5 most recent crashes were 0x1A) 0x24 NTFS_FILE_SYSTEM - 4 times (the most recent happened 3 weeks ago) 0xE4...
BSOD Help and Support
BSOD newly built PC
Can you please help me with a few of these dumps. The computer has been giving me a random BSODs since its been built. Thanks for all the help. Windows 7 64bit OEM System is brand new and fresh install of OS
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:59.
Twitter Facebook Google+