Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: page fault in nonpaged area

24 Mar 2011   #1
flipgenyus

win 7 pro 64-bit
 
 
page fault in nonpaged area

system crashed without any notable events. bsod error stated page fault in nonpaged stop error 0x050. system automatically restarted. unable to boot. launched startup repair, but it was unable to repair the problems. attempted system restore, but no restore points were found. restarted system and it booted normally into windows. currently mind-boggled. bsod dump and perfmon files attached below. thanks.

win 7 pro x64
system originally came with win xp home x86, performed clean install about a year ago
oem disc purchsed from compusa
system will be 4 in may.
win 7 was cleanly installed about a year ago


My System SpecsSystem Spec
.
24 Mar 2011   #2
mgorman87

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64bit
 
 

There are no BSOD dumps in the report you uploaded.

Browse to your C:/minidumps folder and copy all files from there and paste them to
your desktop. Put them in a zip and upload them here.
My System SpecsSystem Spec
24 Mar 2011   #3
flipgenyus

win 7 pro 64-bit
 
 

thanks for the quick reply.

I searched for the minidumps folder but could not find one.
My System SpecsSystem Spec
.

24 Mar 2011   #4
mgorman87

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64bit
 
 

Do you use Ccleaner or any other type of computer cleaner? If you do, stop, because it erases the memory dumps needed to diagnose your problem.

-Right click My Computer and select Advanced System Settings from the left pane.
-Under Startup and Recovery click Settings
-Make sure Write an even to the system log is checked and Automatically Restart is not checked.
-The Write Debugging Information should be Small memory dump
-The small dump directory should say %SystemRoot%\Minidump

The next time the computer crashes a memory dump will be created and placed into C:\Minidump. Upload that file here
My System SpecsSystem Spec
24 Mar 2011   #5
flipgenyus

win 7 pro 64-bit
 
 

I just changed the settings in the startup and recovery window. I'm guessing that I don't have a minidumps folder because it wasn't correctly set to do so. Should my laptop crash again, I'll upload the dump here.

Thanks again for your time.
My System SpecsSystem Spec
24 Mar 2011   #6
mgorman87

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64bit
 
 

From what you uploaded I can already tell you that you need to update to SP1.

How to update to SP1


Your video card drivers are also very outdated. Follow the directions from here on how to update them

EDIT: After looking around some more on google, you might just have the latest drivers for your card because it is an older card and drivers are no longer made for it.

EDIT2: Check out this link about updating your video card. http://www.hardwareheaven.com/modtool.php

information   Information
---------------
Display Devices
---------------
Card name: ATI Mobility Radeon X1400
Manufacturer: ATI Technologies Inc.
Chip type: ATI Radeon Graphics Processor (0x7145)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_7145&SUBSYS_200617AA&REV_00
Display Memory: 1405 MB
Dedicated Memory: 126 MB
Shared Memory: 1279 MB
Current Mode: 1680 x 1050 (32 bit) (60Hz)
Monitor Name: ThinkPad Display 1680x1050
Monitor Model: unknown
Monitor Id: IBM2887
Native Mode: 1680 x 1050(p) (60.108Hz)
Output Type: Internal
Driver Name: atiumdag,atiumdva,atiumd64.dll,atiumd6a.cap,atitmm64.dll
Driver File Version: 7.14.0010.0630 (English)
Driver Version: 8.561.0.0
DDI Version: 9Ex
Driver Model: WDDM 1.0
Driver Attributes: Final Retail
Driver Date/Size: 12/1/2008 20:29:34, 4033536 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71EE2-3205-11CF-6C76-0C00A1C2CA35}
Vendor ID: 0x1002
My System SpecsSystem Spec
24 Mar 2011   #7
flipgenyus

win 7 pro 64-bit
 
 

I didn't even know that they released sp1 yet. It just showed up after I ran win update. Updating as we speak.

As for the ATI driver, I didn't get a notification about your edits and had to learn the hard way that I already had the latest driver by following the directions on the link you posted.

I'll take a look at the Mobility modder after sp1 finishes.

Thanks again.
My System SpecsSystem Spec
24 Mar 2011   #8
mgorman87

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64bit
 
 

Hold off on the mobility modder until I can read a bsod dump. Why fix something if it isn't broke?
My System SpecsSystem Spec
Reply

 page fault in nonpaged area




Thread Tools




Similar help and support threads
Thread Forum
Page Fault In Nonpaged Area
After more than 100 PFN_LIST_CORRUPT and one Memory Management BSOD, I get this now: Page Fault In Nonpaged Area What is the cause of this? Here is my dump file
BSOD Help and Support
Page fault in nonpaged area
Hi thank you for your attention, I know there are threads out there about this problem already and i just wanted to cut through the basics. I am not that computer literate so plz be patient with me. My Specs... AMD Phenom IIx6 1090T Black ASUS M4A78T-E 4GB 2x2 DDR3 G-Skills Ripjaws...
BSOD Help and Support
Page Fault in NonPaged Area
Dear all, I've bought a new system (it's an Intel I7 with 16GB RAM) and I've just installed Windows 7 64bits Professional Edition. I'm trying to copy a large amount of data (180GB aprox) from another PC by using a external USB disc and the machine keeps panicing with the page fault in...
BSOD Help and Support
Page fault in nonpaged area
Hi. I bought my Toshiba A665-S6070 last July. (OEM Win7 Home Premium x64). HDD crashed, so I (long story short) was able to pull an image off it and reinstalled the image onto a new HDD. Have received two BSODs about Page fault in nonpaged area. What to do next? Thanks. MrDave
BSOD Help and Support
Page Fault in NonPaged Area
I received a Stop error when I was actually doing nothing. Just happened. I have attached the dump. I restored to a couple of days ago, and Windows had to repair my Start items. I am back up, but I don't know what happened and how I can stop it from happening again. Any insights would be...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:11.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App