Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 install problem

01 Apr 2011   #11
AirPower4ever

Windows 10 Pro 64-bit
 
 

Okay, so I put everything back and then went in to the BIOS (same results, would not boot at all) and I checked the v-core. Came in at .856. So I set the v-core to manual and raised the voltage to 1.25V and it booted up and stable.

Once you set the BIOS to manual, the BIOS will show you the setting and right below the setting will be the voltage it is actually drawing. The IMC and memory were set to low and the readings were right on. But you were right M, the v-core was too low at .856 setting and draw.

I know this board is old, but if someone does get this board, be advised to raise the v-core if you had the same problem as myself.

Going to start OC'ing and then find the sweet spot.


My System SpecsSystem Spec
.
01 Apr 2011   #12
Minotar

Windows 7 Ultimate 64bit
 
 

Quote   Quote: Originally Posted by AirPower4ever View Post
Okay, so I put everything back and then went in to the BIOS (same results, would not boot at all) and I checked the v-core. Came in at .856. So I set the v-core to manual and raised the voltage to 1.25V and it booted up and stable.

Once you set the BIOS to manual, the BIOS will show you the setting and right below the setting will be the voltage it is actually drawing. The IMC and memory were set to low and the readings were right on. But you were right M, the v-core was too low at .856 setting and draw.

I know this board is old, but if someone does get this board, be advised to raise the v-core if you had the same problem as myself.

Going to start OC'ing and then find the sweet spot.
Good to hear its's running well for you now,ill keep an eye out for your posts to see how you got on with your overclock
My System SpecsSystem Spec
Reply

 Windows 7 install problem




Thread Tools




Similar help and support threads
Thread Forum
Install windows problem
hello friends, as the title says , i have a problem with windows installing ,let me tell you exaclty.my old computer have windows xp with dual core to 3Ghz and 2GB ram , i try to install windows 7 but when i am trying to boot from USB the computer restars from the start. I try to format the hard...
Installation & Setup
Windows XP Install Problem
Hello guys, I have got a new/sealed Windows XP with SP3. When I try to install it and I get to the product key entered it says at it is not the right key and I have a few times making sure that I am getting it right, with the same error. It is a genuine disc and key. What is wrong?
Chillout Room
windows install problem
Hi i just bought a new computer last week its a gateway dx series and recently all my emails got hacked 2 or 3 different times so i figured it was a keylogger. Tired to get rid of it and the programs couldn't find it so i reformatted the computer back to factory settings. Everything went smooth...
Installation & Setup
Windows 7 install problem
I previously had vista installed an upgraded to windows 7 didn't think twice for some reason to check where it was be downloaded and it went to the d: drive (recovery drive) then had to reload microsoft office and it also want to go to this same drive an ultimately ran out of room and now i'm at a...
Installation & Setup
Windows 7 Install Problem
Hi I have an HP Pavilion dv6000 laptop purchased last year. It originally ran Windows Vista 64 bit and began having problems almost immediately. Eventually it got so bad the hard drive died with no ability to recover. I purchased a replacement hard drive which I installed. Without any...
Installation & Setup
Windows 7 Install Problem
Hello, I downloaded and made an install DVD for Win 7. Computer installed when through all screens through reboot. Now all I can see is a black screen. Lower right hand corner says Windows 7 Evaluation copy build 1700. If I let it sit long enough the screen will go completely blank, but once you...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:04.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App