Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: HttpEvent 15010 Error causes sytem crash

10 Apr 2011   #1
Maximus 542

Windows 7 Ultimate 32bit
 
 
HttpEvent 15010 Error causes sytem crash

hello to everybody im new to this forum i have been having this problem for a while now and tried everything. When im on the internet my pc crashes at random to a white screen sometimes every five minutes and other times it could take hours i already tested my pc to see if its a overheating problem but couldn't see anything ill paste the event log at the bottom please any help would be greatly appreciated

- System

- Provider


[ Name] Microsoft-Windows-HttpEvent


[ Guid] {7b6bc78c-898b-4170-bbf8-1a469ea43fc5}


[ EventSourceName] HTTP


- EventID 15010


[ Qualifiers] 49152



Version 0


Level 2


Task 0


Opcode 0


Keywords 0x80000000000000

- TimeCreated


[ SystemTime] 2011-04-10T22:09:03.410400000Z



EventRecordID 16119


Correlation

- Execution


[ ProcessID] 4


[ ThreadID] 52



Channel System


Computer Maximus-PC


Security
- EventData

DeviceObject \Device\Http\ReqQueue

Url



000004000200300000000000A23A00C00000000000000000000000000000000000000000000000004C0100C0
Binary data:

In Words
0000: 00040000 00300002 00000000 C0003AA2
0008: 00000000 00000000 00000000 00000000
0010: 00000000 00000000 C000014C

In Bytes
0000: 00 00 04 00 02 00 30 00 ......0.
0008: 00 00 00 00 A2 3A 00 C0 ....:.
0010: 00 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
0028: 4C 01 00 C0 L..



My System SpecsSystem Spec
.
10 Apr 2011   #2
Maximus 542

Windows 7 Ultimate 32bit
 
 

i also found another error that occurs around the same time here is the event log

Event46, volmgr

- System

- Provider


[ Name] volmgr


- EventID 46


[ Qualifiers] 49156



Level 2


Task 0


Keywords 0x80000000000000

- TimeCreated


[ SystemTime] 2011-04-10T22:08:58.470000000Z



EventRecordID 16089


Channel System


Computer Maximus-PC


Security
- EventData


\Device\HarddiskVolume3


0000000001000000000000002E0004C001100000010000C000000000000000000000000000000000
Binary data:

In Words
0000: 00000000 00000001 00000000 C004002E
0008: 00001001 C0000001 00000000 00000000
0010: 00000000 00000000

In Bytes
0000: 00 00 00 00 01 00 00 00 ........
0008: 00 00 00 00 2E 00 04 C0 .......
0010: 01 10 00 00 01 00 00 C0 .......
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
My System SpecsSystem Spec
10 Apr 2011   #3
usasma
Microsoft MVP

 
 

Please start with these free diagnostics:
Quote:
H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
HD Diagnostic (read the details at the link)

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Scanners (read the details at the link)
And please provide this info even though you're not reporting BSOD's: https://www.sevenforums.com/crashes-d...tructions.html
My System SpecsSystem Spec
.

11 Apr 2011   #4
Maximus 542

Windows 7 Ultimate 32bit
 
 

ok ive uploaded the Windows_NT6_BSOD_jcgriff2 folder & the PERFMON HTML i did not have clean cds to create a boot disk for the memtest and hdd diagnostics at this time sorry for the late reply been out of town for work thanks for all the help
My System SpecsSystem Spec
11 Apr 2011   #5
Maximus 542

Windows 7 Ultimate 32bit
 
 

ive also ran housecall and it came up clean
My System SpecsSystem Spec
11 Apr 2011   #6
usasma
Microsoft MVP

 
 

Lot's of issues with your nVidia graphics drivers in the Application Event Log. Please do the following:
- uninstall your nVidia graphics drivers
- go to this link and download the latest version of the graphics drivers: NVIDIA DRIVERS 266.58 WHQL
- install the drivers and see if that helps.

Your E: drive only has about 3% free space. 15% is suggested for best performance (45gB on that drive). Please free up that amount from the drive.

Please run CHKDSK /R on all hard drives:
Quote:
CHKDSK /R /F:
Run CHKDSK /R /F from an elevated (Run as adminstrator) Command Prompt. Please do this for each hard drive on your system.
When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter. Then reboot and let the test run. It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors. See "CHKDSK LogFile" below in order to check the results of the test.

Elevated Command Prompt:
Go to Start and type in "cmd.exe" (without the quotes)
At the top of the Search Box, right click on Cmd.exe and select "Run as administrator"

CHKDSK LogFile:
Go to Start and type in "eventvwr.msc" (without the quotes) and press Enter
Expand the Windows logs heading, then select the Application log file entry.
Double click on the Source column header.
Scroll down the list until you find the Chkdsk entry (wininit for Win7) (winlogon for XP).
Copy/paste the results into your next post.
There are issues with your system creating crash dumps. Each crash seems to generate the following error:
Quote:
Event[117]:
Log Name: System
Source: volmgr
Date: 2011-04-11T17:27:00.736
Event ID: 46
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Maximus-PC
Description:
Crash dump initialization failed!
It's imperative that you run the hard drive tests - both the CHKDSK mentioned above and the diagnostic mentioned in my previous post.
My System SpecsSystem Spec
13 Apr 2011   #7
Maximus 542

Windows 7 Ultimate 32bit
 
 

thank your your help so far i have clean installed my Nvidia drivers had a strange effect right after the install my screen filled up with artifacts but haven't happened again after i restarted my pc further i ran the
HDTune utility and the
CHKDSK /R /F on all my drives but it came up clean i hope this is the end of my troubles but ill keep you posted thank you again for all your help
My System SpecsSystem Spec
14 Apr 2011   #8
Maximus 542

Windows 7 Ultimate 32bit
 
 

both error still occur and crashes when i use the internet dnt know what to do now
My System SpecsSystem Spec
15 Apr 2011   #9
usasma
Microsoft MVP

 
 

Without memory dumps there's not much that I can do.
I'd have to suggest a repair install of Windows: Repair Install
If that doesn't work, then I'd go with:
- backup your stuff/data
- wipe the hard drive with DBAN or KillDisk (free, use Google to find it)
- install Windows
- install ALL driver's that aren't recognized by Windows (in Device Manager)
- install ALL Windows Updates
- install a free antivirus (for testing purposes): Free AntiVirus
- DON'T install anything else until you're sure that it's working correctly.
My System SpecsSystem Spec
16 Apr 2011   #10
Maximus 542

Windows 7 Ultimate 32bit
 
 

ok ive found ot the problem with the volmgr error and fixed it i now got dumpfiles being saved to my C drive but i also noticed a new error in my event log in startup and recovery i checked the box at system failure that said write an event to system log but here is the other error i thank you for your help so far .the error name is 10016,DistributedCOM and it says the following:

The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{BC866CF2-5486-41F7-B46B-9AA49CF3EBB1}
and APPID
{066FCC09-2096-4EEF-AA2F-353DB80F1BF8}
to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.

heres the details

- System

- Provider


[ Name] Microsoft-Windows-DistributedCOM


[ Guid] {1B562E86-B7AA-4131-BADC-B6F3A001407E}


[ EventSourceName] DCOM


- EventID 10016


[ Qualifiers] 49152



Version 0


Level 2


Task 0


Opcode 0


Keywords 0x80000000000000

- TimeCreated


[ SystemTime] 2011-04-16T16:13:32.000000000Z



EventRecordID 21646


Correlation

- Execution


[ ProcessID] 0


[ ThreadID] 0



Channel System


Computer Maximus-PC

- Security


[ UserID] S-1-5-19

- EventData

param1 machine-default

param2 Local

param3 Activation

param4 {BC866CF2-5486-41F7-B46B-9AA49CF3EBB1}

param5 {066FCC09-2096-4EEF-AA2F-353DB80F1BF8}

param6 NT AUTHORITY

param7 LOCAL SERVICE

param8 S-1-5-19

param9 LocalHost (Using LRPC)
this error happens with the previous httpevent error and my the crash still only happens while browsing the internet other things ive noticed is that sometimes icons on my desktop kinda go pix-elated and distorted and other times a horizontal line will flash on the screen dont know if this could be my GPU as it is only a few months old and i dnt overclock anything
My System SpecsSystem Spec
Reply

 HttpEvent 15010 Error causes sytem crash




Thread Tools




Similar help and support threads
Thread Forum
Error creating sytem repair disc
I have a Dell Inspiron N7110 (64-Bit) and run Windows 7 Home Premium. I was attempting to make a system repair disc, but it stops in the middle of the process with a screen that says: System Repair Disc could not be created The write failed because the drive returned error information that...
General Discussion
An interesting new sytem
Home | Utilite
Hardware & Devices
error 0x8007007B failure trying to reinstate via CP Sytem restore
confusion: most answers say activation a problem, putting a copy of recommended diagnostics below: Diagnostic Report (1.9.0027.0): ----------------------------------------- Windows Validation Data--> Validation Code: 0 Cached Online Validation Code: 0x0 Windows Product Key:...
Windows Updates & Activation
BOOT MGR image is corrupt The sytem cannot boot error! URGENT!!
I installed windows 8 transformation pack (i know im stupid) and after restarting it says BOOT MGR image is corrupt The sytem cannot boot i dont have the windows 7 CD because i installed it from my USB, but i tried putting windows vista CD but it still says the System Cannot boot. please...
General Discussion
"Sytem Repair Disk" Can't Load - Error 4001100200001012
Went into the W7 control panel to make a 'system repair disk' (boot disk), just in case I ever needed it. Making the disk went OK, with W7 telling me it had successfully finished, and to label the CD. I then put the boot CD into my DVD drive to make sure it worked OK. Computer boots from the...
General Discussion
What is Sytem Reserved?
What is Sytem Reserved?
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:22.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App