Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD -> :'(

25 Apr 2011   #31
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

The Command Rate 2T will be good, I'll check on the Link/Unlink setting.
Can you post the current CPUZ tabs again, to check if anything has changed.

Go to the BIOS and check what the DRAM voltage is set at, post in your next reply.

Good temps for the Prime95 test.

No motherboard company can test all the RAM that is available, I'll look at the RAM again and let you know.
The PSU and graphics card should be fine.

Let us know how the memtest86+ went.


My System SpecsSystem Spec
.
26 Apr 2011   #32
skandalouz

Windows 7 Ultimate x64
 
 

Hi,
I've contacted MSI over this, and they said it could be the motherboard, and recommend I return it to have it tested, so thats what I'm about to do.
Thanks for all the help.
My System SpecsSystem Spec
26 Apr 2011   #33
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

You're welcome.

Hopefully this will solve the crashes, let us know how the new board works out.
My System SpecsSystem Spec
.

09 May 2011   #34
skandalouz

Windows 7 Ultimate x64
 
 

Hi again,
So I've sent it back where it came from, they've ran a memtest test for 13+ hours and did a burn-in test on the motherboard. Both came out great. So they've returned the same products to me. Just did a fresh install of Windows, wouldn't work, found out by error code a fix could be to remove usb devices. Did so, installed perfectly. Put in the MSI cd to install all drivers (for which I had to use my USB mouse). Now... updating 74 updates, and by the end of it.. no mouse response! Again! And as usual, windows won't shut down.
The only thing I did was a graphics driver install. Updated the bios the moment it got back, to 1.11. Any suggestions?
My System SpecsSystem Spec
09 May 2011   #35
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Did you note the update installed when the mouse stopped working?

Do you have another mouse to try for testing purposes?
Did you install a driver for the mouse?

Which graphics driver did you install?
Try another older version.
My System SpecsSystem Spec
10 May 2011   #36
skandalouz

Windows 7 Ultimate x64
 
 

Sorry I was busy on my laptop so wasn't paying attention to the updating.

I've tried another Win7 install. My first dvd gave some data corruption when extracting the files, the second and third gave me an error code I've come across before (0x80070570) which could be solved by unplugging any usb devices. That worked, but why? On the mouse I've been using so far, and on another simple mouse and keyboar (keyboard in ps/2 port).
The mouse/keyboard set I was using has been in use on a Windows XP system over a day now without problems.
The graphics driver is the newest from Nvidia, 270.??.
The logitech mouse and keyboard have no win7 drivers, they're too old.
I've had contact with MSI, and they told me to try to set the DRAM voltage at 1.65V, and I'm now running a memtest, 6 passes already.
Greetz
My System SpecsSystem Spec
11 May 2011   #37
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Did you install the logitech mouse and keyboard drivers in Vista or XP compatibility mode?

Did you change the CPU I/O to 1.170v as mentioned in post#19?

You need to keep the CPU I/O voltage within 0.50v of the DRAM voltage, this is a known issue and can cause CPU damage.
My System SpecsSystem Spec
12 May 2011   #38
skandalouz

Windows 7 Ultimate x64
 
 

Hi
Haven't installed any drivers. Just noticed there are Vista drivers, I'll try those.
No sorry kept it at 1.150, I'll change it now.
I'll try to install again, Let you know how it goes.
My System SpecsSystem Spec
12 May 2011   #39
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Thanks for the update.

Let us know if you get any crashes.
My System SpecsSystem Spec
13 May 2011   #40
skandalouz

Windows 7 Ultimate x64
 
 

Hi there,
couldn't install Win7 at all. All three disks gave me error 0x80070570. Tried on another hdd, worked after a couple of tries. BSOD'd when i tried to copy some videos to an external drive.
My System SpecsSystem Spec
Reply

 BSOD -> :'(




Thread Tools



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:40.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App