Display driver stops responding

Page 3 of 3 FirstFirst 123

  1. Posts : 1,782
    Windows 7 Home Premium 64bit
       #21

    Read this and follow the steps
    Windows 7 64-bit freezes at loading screen with GT 450 1GB DDR5 - NVIDIA Forums


    I usually don't recommend doing driver sweeper but we will try it in your situation

    Follow the guide here to do a clean install of the drivers
    GeForce Driver Installation Guide - NVIDIA Forums

    Driver Sweeper
    Phyxion.net - Driver Sweeper

    Let me know if that works or if you run into any problems
      My Computer


  2. Posts : 19
    Windows 7 Ulitmate 64 bit
    Thread Starter
       #22

    I did it. I even formatted my C: and reinstalled Windows. So it's a completely new install with no old drivers.
    I tried the Furmark test again. At about 74 °C glitches start to appear on the screen, but only for a partial second. Then at around 84 °C the screen freezes and the best case scenario is an autorestart. Or I have to press Reset.
    I start to think that the nVidia guys just didn't pay enough attention to my GPU and did not increase the heat enough.
    Could it be a cooling problem? These cards should work without any problem at 100 °C, shouldn't they?

    EDIT: I tried a Furmark test right after the last CTD. I removed the side panel of my whatever - the casing which holds all the hardware together - is called in English (sorry, I just can't remember ^^') for better cooling, but not it crashed when it reached only 75 °C
      My Computer


  3. Posts : 1,782
    Windows 7 Home Premium 64bit
       #23

    Kmerse said:
    I did it. I even formatted my C: and reinstalled Windows. So it's a completely new install with no old drivers.
    I tried the Furmark test again. At about 74 °C glitches start to appear on the screen, but only for a partial second. Then at around 84 °C the screen freezes and the best case scenario is an autorestart. Or I have to press Reset.
    I start to think that the nVidia guys just didn't pay enough attention to my GPU and did not increase the heat enough.
    Could it be a cooling problem? These cards should work without any problem at 100 °C, shouldn't they?

    EDIT: I tried a Furmark test right after the last CTD. I removed the side panel of my whatever - the casing which holds all the hardware together - is called in English (sorry, I just can't remember ^^') for better cooling, but not it crashed when it reached only 75 °C
    I'm gonna go with a bad card. I would tell nVidia what you've done and what you've seen (i.e low temps and still crashes, artifacts, etc) and ask that they replace the card.
      My Computer


 
Page 3 of 3 FirstFirst 123

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 03:54.
Find Us