Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Crash After startup about 5mins after.

01 May 2011   #31
AngryCircle

Windows 7 Professional X64
 
 

Ok here are those screenies you asked for.

Can you please guide me on getting the other info you have asked for, thank you.


My System SpecsSystem Spec
.
01 May 2011   #32
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

First, will need the system information, is it OEM like Dell, HP, Acer etc, or a custom build?

Any other info will help.
My System SpecsSystem Spec
01 May 2011   #33
AngryCircle

Windows 7 Professional X64
 
 

Ok Its a ADVENT Centurion CBE 1401 Somthing or other. and its classed a gaming computer. Its not a custom build no.

Also i have a question. here is a screenshot of a process that is beginning to piss me off. it slows my computer down like crazy, it's called 'trustedinstaller.exe' its using like 50% of my CPU and its stopping me from playing any games at all because its making the CPU bottleneck. This is only happening recently.
My System SpecsSystem Spec
.

01 May 2011   #34
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Is this you system.
Attachment 152227
My System SpecsSystem Spec
01 May 2011   #35
AngryCircle

Windows 7 Professional X64
 
 

yes thats my pc. That warranty for hardware only?
My System SpecsSystem Spec
01 May 2011   #36
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Having trouble finding any information on it, so can't tell you much about it.

You will have to ask Advent or where you bought it about the warranty.

I'll try and find where the voltage info is at in your BIOS.
Do you have a motherboard manual?
Look in the BIOS section it should tell you where to find the RAM voltage and CPU NB voltage.

I'll post here if I find anything.
My System SpecsSystem Spec
01 May 2011   #37
AngryCircle

Windows 7 Professional X64
 
 

Quote   Quote: Originally Posted by Dave76 View Post
Having trouble finding any information on it, so can't tell you much about it.

You will have to ask Advent or where you bought it about the warranty.

I'll try and find where the voltage info is at in your BIOS.
Do you have a motherboard manual?
Look in the BIOS section it should tell you where to find the RAM voltage and CPU NB voltage.

I'll post here if I find anything.
i dont have a manual no. sorry.

Just so you know the bluescreen has stopped showing up as regular as it used to. i havent had BSOD for about 1-2days now.
My System SpecsSystem Spec
01 May 2011   #38
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

That is good news, those RAM errors will need to be looked at or you will have more problems.

You can D/L your motherboard manual here: Foxconn A7VMX-K
Scroll down to where is says 'Motherboard Manual'


In chapter 3, page 27, Fox Central Control Unit - Voltage Options.

In Your BIOS you will see:
CPU Voltage
Memory Voltage
NB Voltage
HT/SB Voltage

Post the voltage for the 'Memory Voltage' and 'NB Voltage'

The default NB voltage is 1.10v, you need to increase this to 1.20v.

Go to your BIOS.
When the system is booting up you will see a screen with "Press <DEL> to enter Setup", press DEL (the Delete key) repeatedly until it goes to the BIOS page, same that's in the manual.
Select 'Fox Central Control Unit'
Select 'Voltage Options'
Select 'NB Voltage Controls'
Select the +100mV

This will give you 1.20V for the NB (North Bridge) memory controller, this will help the RAM run stable.
Run Memtest86+ again, for 7 passes or overnight. If you get any errors, red lines across the screen, you can stop the test and post the results here.
My System SpecsSystem Spec
01 May 2011   #39
AngryCircle

Windows 7 Professional X64
 
 

Hey i changed the voltage as you asked.

i then run the test and within 2seconds all the read line were shown and about 4 tests through there was about 4000 errors lol... damm.
My System SpecsSystem Spec
01 May 2011   #40
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

This is not unusual, we may have to bump the voltage a couple of times.
From +28,000 errors to 4,000 errors, we are making progress.

Go to BIOS again:
Select 'NB Voltage Controls'
Select the +200mV

This will give you 1.30V for the NB.

Then go to 'Memory Voltage Control'
Select the +50mV

This will give you 1.85V for the RAM.

Run Memtest86+ again, for 7 passes or overnight. If you get any errors, red lines across the screen, you can stop the test and post the results here.
My System SpecsSystem Spec
Reply

 BSOD Crash After startup about 5mins after.




Thread Tools




Similar help and support threads
Thread Forum
Windows Explorer crash upon startup, no BSoD
Hello! My name is Gavin, and my problem today is that I have a constant crash of Windows Explorer upon startup and can't seem to get it fixed. I'll provide some details below. Safe Mode: Loaded once, and then continued to crash after. Checked multiple times, still crashing. Regular...
General Discussion
BSOD crash on first startup (new computer)
Hi, I just bought two identical Asus Desktop computers. The first one works fine. On the second computer, when I login into Windows, I receive a BSOD (that happens right after I enter the login password). It happened on my very first startup attempt so I did not install anything. (I only...
BSOD Help and Support
BSOD crash at windows startup
Okay so I've had this problem about few weeks now and I thought I should post it here. Almost every time when i turn my pc on it crashes. I've seen so far these BSOD errors: Stop 0x000000a, 0x000001a, Stop: 0x0000050 and Stop: 0x00000109. I've attached the zip file which should have the required...
BSOD Help and Support
Random BSOD's + Driver verifier startup crash
Hello, I have recently build build my own pc. This pc has never worked stable, i've been experiencing random bsod's. Sometimes they come 20 in a row and the system is stable for only a few minutes. Sometimes, usually when I tweaked a little with the system, like increased the voltage over the...
BSOD Help and Support
BSOD Crash when startup
Hi when i am trying run the program wireless manager i got that ERROR : Description: Stopped working Problem signature: Problem Event Name: CLR20r3
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:47.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App