New
#11
I ran my memtest86+ for 12 hrs, still no errors.
Where do I find the seatools's "Full test"
I did run all "basic tests", including the short and long generic, except for the advanced ones. (because of the userdata loss)
I ran my memtest86+ for 12 hrs, still no errors.
Where do I find the seatools's "Full test"
I did run all "basic tests", including the short and long generic, except for the advanced ones. (because of the userdata loss)
The short and long tests are enough for the SeaTools tests.
Run this Graphics Card test.
Video Card - Stress Test with Furmark - Watch the GPU temps, don't go over 90°C, run for 30 minutes minimum.
Go to your BIOS and tell us what the CPU, RAM and the CPU integrated memory controller voltages are.
The CPU integrated memory controller voltage should be CPU NB.
Run a system file check - SFC /SCANNOW Command - System File Checker
Last edited by Dave76; 06 May 2011 at 00:49.
I ran the Graphcard test, at 1650x1050 and it was 86°C tops. Also, the SFC scan was okay, bno corrupted files.. For for CPU, Ram aand CPU NB... what am i accually looking for there? or what do I look up exactly?
I've looked everywhere, can't find the Value's..
BTW: I usually get bluescreen a little after start-up,it seems.
Edit: After reading some other forum thread I noticed many say I should check "Select 'Fox Central Control Unit'"
But I do not have that option.
Last edited by Drakinus; 07 May 2011 at 06:17.
MedionPC is the OEM, they usually don't advertise the motherboard brand.
D/L: SIW - System Information for Windows
This will tell you everything about your computer, post the motherboard manufacturer and revision number here.
"Select 'Fox Central Control Unit'" tells me it might be a Foxcon motherboard.
With some info on it we can find the manual.
Your BIOS is American Megatrends, it will depend on how they set it up.
Property Value
Manufacturer MEDIONPC
Model MS-7708
Version 1.2
Serial Number
North Bridge Intel DMI Host Bridge Revision 11
South Bridge Intel P55 Revision 11
CPU Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz
Cpu Socket Socket 1156 LGA
System Slots 3 PCI, 1 AGP
Memory Summary
Maximum Capacity 8192 MBytes
Maximum Memory Module Size 4096 MBytes
Memory Slots 2
Error Correction None
Warning! Accuracy of DMI data cannot be guaranteed
Is that info from SIW?
It usually will list the motherboard manufacturer.
Do you have a motherboard manual?
Need to find the BIOS section info, each BIOS and OEM lists the settings with different names.
In your BIOS go to any voltage control page and take a picture and post here.
That's all the info I got from SIW. I don't got any manual either.
I Have made a picture of all the BIOS pages. There is some page with 3.330 V or something, but I can't change anything there. It's just a view-only page. Here they are:
It might be a bit of an overkill, but this way, you see everything I have.
Most OEMs severely limit the BIOS functions, looks like you don't have many options in that BIOS.
Can you contact the OEM and ask for a motherboard manual or BIOS manual, website link or ask them to send it to you.