Freezes and crashes in Windows 7 64bit

Hi Alpha Techheads,

I have just built my rig and I am having constant but irregularly timed crashes and freezes. I have attached the zip file with the info from the diagnostic tool. Can you please assist?

I have also been having the dreaded ID 10 errors. I ran the script located on the Microsoft site but I just get the error attached in the errorpic file. Doesn't seem to make any difference.

Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.


I have run the Windows 7 Memory tester and it detects no problems with my RAM. I have installed all drivers for Windows 7, and have even completed a repair install.

When I run a system health check no issues are detected.

Help please!

Cheers,

C.

Please remove any AVG software and use MSE
Post back with latest driver verified dumps if BSODs still occur
Driver Verifier - Enable and Disable

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff80002ed91b0}

Probably caused by : ntkrnlmp.exe ( nt!KiTimerWaitTest+2b0 )


IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002ed91b0, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800031010e8
 0000000000000000 

CURRENT_IRQL:  2

FAULTING_IP: 
nt!KiTimerWaitTest+2b0
fffff800`02ed91b0 488908          mov     qword ptr [rax],rcx

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xA

PROCESS_NAME:  System

TRAP_FRAME:  fffff800044013d0 -- (.trap 0xfffff800044013d0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=fffffa8003ade55f rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002ed91b0 rsp=fffff80004401560 rbp=0000000000000000
 r8=fffff80003045001  r9=0000000000000007 r10=0000000000000071
r11=fffffa80056442b8 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na pe cy
nt!KiTimerWaitTest+0x2b0:
fffff800`02ed91b0 488908          mov     qword ptr [rax],rcx ds:00000000`00000000=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002ecfbe9 to fffff80002ed0640

STACK_TEXT:  
fffff800`04401288 fffff800`02ecfbe9 : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff800`04401290 fffff800`02ece860 : fffff800`043fc000 fffff800`03050cc0 fffff800`044013f8 fffffa80`03ade5b8 : nt!KiBugCheckDispatch+0x69
fffff800`044013d0 fffff800`02ed91b0 : 00000000`00000000 fffff800`02edc062 fffff800`04401648 00000000`00000000 : nt!KiPageFault+0x260
fffff800`04401560 fffff800`02edbead : fffffa80`03ade5b0 00000000`00000000 00000000`00000000 00000000`00000102 : nt!KiTimerWaitTest+0x2b0
fffff800`044015e0 fffff800`02edbdee : 00000031`af761f6e fffff800`04401c58 00000000`0014df71 fffff800`030460a8 : nt!KiProcessExpiredTimerList+0x6d
fffff800`04401c30 fffff800`02edbbd7 : 0000000f`98bc12c6 0000000f`0014df71 0000000f`98bc12a2 00000000`00000071 : nt!KiTimerExpiration+0x1be
fffff800`04401cd0 fffff800`02ec836a : fffff800`03042e80 fffff800`03050cc0 00000000`00000000 fffff880`0148da00 : nt!KiRetireDpcList+0x277
fffff800`04401d80 00000000`00000000 : fffff800`04402000 fffff800`043fc000 fffff800`04401d40 00000000`00000000 : nt!KiIdleLoop+0x5a


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!KiTimerWaitTest+2b0
fffff800`02ed91b0 488908          mov     qword ptr [rax],rcx

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  nt!KiTimerWaitTest+2b0

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  4ce7951a

FAILURE_BUCKET_ID:  X64_0xA_nt!KiTimerWaitTest+2b0

BUCKET_ID:  X64_0xA_nt!KiTimerWaitTest+2b0

Followup: MachineOwner
---------

[QUOTE=yowanvista;1391823]Please remove any AVG software and use MSE
Post back with latest driver verified dumps if BSODs still occur
Driver Verifier - Enable and Disable
[CODE]*******************************************************************************
*

OK, will repost in a moment with AVG uninstalled.

Here is the only dump file in the folder. I changed the dump settings to small dump yesterday after reinstalling the OS.

Please remove Gigabyte Easy Tune and stop any overclocking if any

OK, will do that. I ran Memtest last night overnight (it ran to 460%) and it detected no memory issues.