Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD on fresh install of Win7

13 May 2011   #1

Windows 7 Ultimate x64 Full Retail SP1
BSOD on fresh install of Win7

Well, I guess I wasn't as lucky as I thought. 5 days then boom. dump files attached. Dammit.

My System SpecsSystem Spec
13 May 2011   #2

Win 8 Release candidate 8400

Quote   Quote: Originally Posted by badkarma11 View Post
Well, I guess I wasn't as lucky as I thought. 5 days then boom. dump files attached. Dammit.

It is difficult to diagnose from a single DMP file because there are no trends to follow. That is the case here. The analysis points to the DirectX portion of your video driver/card, and can either be a video driver or the video hardware itself.

I would first re-install the video driver using this

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

Or - Driver Sweeper

When it is removed then download and install the fresh copy.

Also of note some really old software (below) was the running process at the time of the crash. I would see if there is an update or remove it if not essential.

This one related to ParaWin XP - International Language Software for Windows XP/NT/2000
My System SpecsSystem Spec
14 May 2011   #3

Windows 7 Ultimate x64 Full Retail SP1

Thanks zig,
I installed Win7, Windows update picked up a driver for the video card, and then I installed the latest driver for it. Hope it's not the hardware but we'll see I guess. It might have been the game that I was playing (world in
conflict). I'll look at the Parawin thing. Link is dead...
My System SpecsSystem Spec

14 May 2011   #4

Win 8 Release candidate 8400

The 3D link is dead for some people hence the other one.

Good luck and keep us in the loop
My System SpecsSystem Spec
15 May 2011   #5

Windows 7 Ultimate x64 Full Retail SP1

sorry, should have been more specific. the XP link is dead.
My System SpecsSystem Spec
15 May 2011   #6

Windows 7 Ultimate x64 Full Retail SP1

*sigh* Well, maybe we can start to discern a pattern now. Blammo, dump attached.
My System SpecsSystem Spec
16 May 2011   #7

Windows 7 Ultimate x64 Full Retail SP1

My System SpecsSystem Spec
17 May 2011   #8

Windows 7 Ultimate x64 Full Retail SP1

Bombed again, dump attached
My System SpecsSystem Spec
17 May 2011   #9

Windows 10 Pro x64, Arch Linux

Memory corruption is indicated, please test your RAM
RAM - Test with Memtest86+

Update Logitech Setpoint
lltdio.sys        fffff880`0475b000    fffff880`04770000    0x00015000    0x4a5bcc92    14/07/2009 04:08:50
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff80002f68808, 0, ffffffffffffffff}

Probably caused by : memory_corruption ( nt!MiUnlinkPageFromBadList+38 )

This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80002f68808, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: ffffffffffffffff, Parameter 1 of the exception

Debugging Details:

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

fffff800`02f68808 488914c1        mov     qword ptr [rcx+rax*8],rdx

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  ffffffffffffffff

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030f20e0




PROCESS_NAME:  WerFault.exe


EXCEPTION_RECORD:  fffff88006d53658 -- (.exr 0xfffff88006d53658)
ExceptionAddress: fffff80002f68808 (nt!MiUnlinkPageFromBadList+0x0000000000000038)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

TRAP_FRAME:  fffff88006d53700 -- (.trap 0xfffff88006d53700)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffdf0000b5bb40 rbx=0000000000000000 rcx=fffffa8000000008
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002f68808 rsp=fffff88006d53890 rbp=fffffa80001e61e0
 r8=fffff88006d538b0  r9=fffff800030f25b0 r10=0000000fffffffff
r11=fffffa80001e49e0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na pe cy
fffff800`02f68808 488914c1        mov     qword ptr [rcx+rax*8],rdx ds:f1c0:fffef280`05adda08=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002ef4ab9 to fffff80002eba700

fffff880`06d52e88 fffff800`02ef4ab9 : 00000000`0000001e ffffffff`c0000005 fffff800`02f68808 00000000`00000000 : nt!KeBugCheckEx
fffff880`06d52e90 fffff800`02eb9d42 : fffff880`06d53658 fffffa80`001e61e0 fffff880`06d53700 fffffa80`00279d50 : nt!KiDispatchException+0x1b9
fffff880`06d53520 fffff800`02eb864a : fffff880`06d53878 fffff880`01258c74 fffffa80`082cae40 fffffa80`00000001 : nt!KiExceptionDispatch+0xc2
fffff880`06d53700 fffff800`02f68808 : fffff8a0`00d4a010 fffffa80`00279d50 fffff800`03032c80 fffff880`06d538b8 : nt!KiGeneralProtectionFault+0x10a
fffff880`06d53890 fffff800`02edb6ed : fffff880`06d539d0 00000000`00000000 fffffa80`079a7de0 fffffa80`075fd010 : nt!MiUnlinkPageFromBadList+0x38
fffff880`06d538e0 fffff800`02ed6b8c : fffffa80`079a7de0 fffffa80`00000000 fffff8a0`079a7de0 fffffa80`001909b0 : nt!MiUnlinkPageFromLockedList+0xbd
fffff880`06d53970 fffff800`02ed4743 : ffffffff`ffffff00 00000000`007e0000 00000000`00000000 fffff800`00000000 : nt!MiDispatchFault+0x7ac
fffff880`06d53a80 fffff800`02eb87ee : 00000000`00000000 00000000`00000000 00000000`00000101 00000000`00000001 : nt!MmAccessFault+0x343
fffff880`06d53be0 000007fe`f06f859f : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x16e
00000000`000cb330 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7fe`f06f859f


fffff800`02f68808 488914c1        mov     qword ptr [rcx+rax*8],rdx


SYMBOL_NAME:  nt!MiUnlinkPageFromBadList+38

FOLLOWUP_NAME:  MachineOwner



IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0x1E_nt!MiUnlinkPageFromBadList+38

BUCKET_ID:  X64_0x1E_nt!MiUnlinkPageFromBadList+38

Followup: MachineOwner
My System SpecsSystem Spec
17 May 2011   #10

Windows 7 Ultimate x64 Full Retail SP1

Thanks for the response
I ran Memtest a week ago, 7 passes, no errors, right before I blew out my C: Drive and reinstalled Win7. I will check out the Logitech link when I get home.
My System SpecsSystem Spec

 BSOD on fresh install of Win7

Thread Tools

Similar help and support threads
Thread Forum
Still getting BSOD after fresh install of win7 on new ssd with new ram
Hi, I have been getting bsod for a while now and on a bit of research tried memtest86 and had errors on test 13 (corsair vengeance 8gb 2 X 4gb) so I went and got some new ram (corsair vengeance pro 16gb 2 X 8gb) and at the same time a new ssd for a fresh install of win 7 so fresh install of...
BSOD Help and Support
BSOD even after fresh install of Win7
Been getting this BSOD randomly. Thought was the vga card as computer would not wake up the next morning after being on all night. And computer would not POST once, only worked when took out vga card and used onboard video. I've since purchased and installed a new vga card. And reinstalled windows...
BSOD Help and Support
BSOD fresh win7-64 install 0x00000124
Hello, Yesterday I bought new PC, and the problem start when I try to install OS. I have legel key but no disc, so I download win7 64-bit ultimate from digitalriver serwers, create bootable iso and install system. Then it started constantly crashes when I try to install drivers or copy big...
BSOD Help and Support
BSOD on a fresh install (win7 pro 64 bit)
I am getting plagued by BSoDs on a fresh (installed yesterday) install of windows 7 pro 64-bit. This is the second time that windows 7 was installed on this system. The first was also plagued by BSoDs any help would be greatly appreciated Is Windows 7 . . . - x86 (32-bit) or x64 ? ...
BSOD Help and Support
BSOD after fresh Win7 Install
I've been having random BSOD crashed for about a year now, since I assembled this machine. 3 or 4 different error codes, all of which pointed to memory issues from what I could find online. I performed a fresh install of Win7 a few nights ago, including a format of my HDD. 2 or 3 days later, the...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:01.
Twitter Facebook