Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Freeze when cold boot 2 or 3 Times.. Help

23 May 2011   #1
xtreme2020

Windows 7 ultimate x64
 
 
Freeze when cold boot 2 or 3 Times.. Help

Computer freeze 2 or 3 times, just after turn on when is cold,, just after 2 or 3 freeze it works fine without any problems

i use memtest86 most of the time no errors but other during test computer freeze without found any error ....

I had 2x1Gb OCZ GOLD no problems, but after upgrade to 4GB start ramdom BSOD, but im no sure it is memory cause report always said no errors,.......Also upgrade from windows 7 32 bits to 64tis

memory 2x2gb G Skill F2-6400CL4-2GBPI-B
Motherboard ECS G31T-M V1.0

MiniDump with whocrashed detailed


System Information (local)
--------------------------------------------------------------------------------


windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:\Windows
CPU: GenuineIntel Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz Intel586, level: 6
2 logical processors, active mask: 3
RAM: 4284735488 total
VM: 2147352576, free: 1995296768



--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.


On Mon 23/05/2011 01:06:07 p.m. GMT your computer crashed
crash dump file: C:\Windows\Minidump\052311-16380-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x80640)
Bugcheck code: 0x50 (0xFFFFF8A01330F1F3, 0x1, 0xFFFFF880012D4956, 0x2)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that invalid system memory has been referenced.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


On Mon 23/05/2011 01:06:07 p.m. GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: tdrpm273.sys (tdrpm273+0x46F3E)
Bugcheck code: 0x50 (0xFFFFF8A01330F1F3, 0x1, 0xFFFFF880012D4956, 0x2)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\drivers\tdrpm273.sys
product: Acronis Try&Decide
company: Acronis
description: Acronis Try&Decide Volume Filter Driver
Bug check description: This indicates that invalid system memory has been referenced.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: tdrpm273.sys (Acronis Try&Decide Volume Filter Driver, Acronis).
Google query: tdrpm273.sys Acronis PAGE_FAULT_IN_NONPAGED_AREA




On Sun 22/05/2011 11:19:03 p.m. GMT your computer crashed
crash dump file: C:\Windows\Minidump\052211-15974-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x80640)
Bugcheck code: 0xD1 (0xFFFFF7FF84BC0F67, 0x9, 0x0, 0xFFFFF7FF84BC0F67)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


On Tue 17/05/2011 07:21:08 p.m. GMT your computer crashed
crash dump file: C:\Windows\Minidump\051711-16614-01.dmp
This was probably caused by the following module: unknown_module_00000000`00000000.sys (Unloaded_Unknown_Module_00000000`00000000+0x27A32B)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80002DB5DB2, 0xFFFFF8800912BA80, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: unknown_module_00000000`00000000.sys .
Google query: unknown_module_00000000`00000000.sys SYSTEM_SERVICE_EXCEPTION




On Tue 17/05/2011 11:58:03 a.m. GMT your computer crashed
crash dump file: C:\Windows\Minidump\051711-16972-01.dmp
This was probably caused by the following module: fileinfo.sys (fileinfo+0x12E2)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF88000C4D2E2, 0x0, 0xFFFFFFFFFFFFFFFF)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\drivers\fileinfo.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: FileInfo Filter Driver
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.


On Tue 10/05/2011 07:43:08 p.m. GMT your computer crashed
crash dump file: C:\Windows\Minidump\051011-20264-01.dmp
This was probably caused by the following module: fltmgr.sys (fltmgr+0x4146)
Bugcheck code: 0x3B (0xC000001D, 0xFFFFF88001249146, 0xFFFFF88007977150, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\drivers\fltmgr.sys
product: Sistema operativo Microsoft® Windows®
company: Microsoft Corporation
description: Administrador de filtros del sistema de archivos de Microsoft
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.


On Tue 10/05/2011 12:11:25 p.m. GMT your computer crashed
crash dump file: C:\Windows\Minidump\051011-22339-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x80640)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF88009631900, 0x0, 0x0)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


My System SpecsSystem Spec
.
23 May 2011   #2
usasma
Microsoft MVP

 
 

Uninstall Acronis as it's the only 3rd party driver identified in the above reports.
Other than that, please provide this info: https://www.sevenforums.com/crashes-d...tructions.html
My System SpecsSystem Spec
Reply

 Freeze when cold boot 2 or 3 Times.. Help




Thread Tools




Similar help and support threads
Thread Forum
windows boot error only in cold boot
So, i recently formatted the pc, Im getting this weird error from windows boot every time i do a cold boot (meaning turning the pc on), if I just reset the pc i dont get the error. Is weird because previous to this error, before formatting, i was getting a different boot error also only on cold...
General Discussion
Computer freeze every hour ! No real BSOD but cold reboot is necessary
Hi people and thanks for helping ;) I have an issue for 2 days now... my computer freeze almost every hour. I have to cold reboot it, reset reboot does'nt work. After a moment, it says "insert a bootable drive....." So : my system drive is a Crucial M4 SSD 256 Go on a SATA 6G intel controller (i...
BSOD Help and Support
Random Freezing/BSOD, Boot Disk Failure, OK Cold Boot then Repeat
Yesterday Windows Explorer began to stop responding fairly frequently, but would restart itself without issue and continue to run fine. Today, Windows now freezes completely every 45ish minutes - usually a random program stops responding followed by everything, the mouse gets stuck,...
BSOD Help and Support
Screens freeze, color changes, requires cold start and Startup repair
4 year old HP desktop, Win7 SP1, 4g ram. quad Intel, Nvidia GeForce 8600 GS. Several days now requiring multiple restarts with all OK for awhile, then freezup and won't shut down and requires power button shutdown and then the Startup Repair done each time. Have run Malware Bytes two or three...
General Discussion
BSOD KSOD No Boot Win7 64bit Cold Boot
I'm at my wits end... The problem: First installed Windows 7 Proff 64-bit on this machine last monday after installing updates / drivers etc I began to recieve intermitent BSODs then began the trouble shooting. Tested memory with memtest86+ passed manually set voltages / timings ran...
BSOD Help and Support
Freeze at different times
Hello, I have installed a clean vista an I did immediatly the windows 7 update, the PC was running fine till I was doing updates and install the windows updates. The PC was just freezing when making a restore point. My keyboard, mouse, ... all not working, it seems that these pheripals have also...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:01.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App