Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSOD Windows 7 Pro 64

01 Jun 2011   #11
erickva

MS Windows 7 64-bit SP1
 
 

Here they are:

Attachment 157632

Attachment 157633

Attachment 157634

Attachment 157635

Thanks


My System SpecsSystem Spec
.
01 Jun 2011   #12
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Good information.

Which motherboard version do you have?
Look on the lower left corner of your motherboard.

How do you like the Hybrid EFI?



There are a couple of issues with your RAM settings.
Even if your RAM passes memtest86+, doesn't mean that the RAM or RAM settings are not causing the crashes.


First, the frequency setting.

There is a known issue with AMD CPUs integrated memory controllers having problems running RAM at 1600 MHz and above.
VERY IMPORTANT INFORMATION REGARDING AMD AM3 CPU's and RAM SPEEDS
Q&A for the topic VERY IMPORTANT INFORMATION REGARDING AMD AM3 CPU's & RAM....

For testing purposes change the RAM frequency to 1333MHz (666MHz).


Second, when you have more than 4GB RAM, RAM cards 2GB or larger, you will usually need to adjust the settings to get it to run stable.

Have you been checking your temperatures?
Use Core Temp , to check the CPU temps when at idle, under load and/or testing.
Let us know the minimum and maximum temps you get.

Go to your BIOS and tell us what the CPU, RAM and the CPU integrated memory controller voltages are.
My System SpecsSystem Spec
01 Jun 2011   #13
erickva

MS Windows 7 64-bit SP1
 
 

Hi Dave,

How do you know I have a Toyota Prius?
I have no idea of what Hybrid EFI is, just had a look Gigabyte website and not sure I can benefit from that as I only have 2 64Gb SSD.

I am not sure about the version, I will check the board as soon as I get home.

Thanks for the help.
Erick
My System SpecsSystem Spec
.

01 Jun 2011   #14
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Hi Erick,

From the CPUZ Mainboard snip, BIOS version FF.

GA-880GA-UD3H (rev. 3.1)

Quote:
1.Update Hybrid EFI version
2. Support Turbo XHD function
The rev 2.0, 2.1, 2.2, BIOS versions are numbered F1 to F7 and don't mention the Hybrid EFI.

Versions 3.0 and 3.1 BIOS versions are numbered FB, FD, FE, FF.

DualBIOS™ 3TB+ HDD Support (Hybrid EFI Technology)
Quote:
Hybrid EFI Technology combines the benefits of GIGABYTE's mature BIOS platform including stability and compatibility with 3rd party products with 3TB+ HDD support from EFI technology.
GIGABYTE DualBIOS™ is a patented technology that automatically recovers BIOS data when the main BIOS has crashed or failed. Featuring 2 physical BIOS ROMs integrated onboard, GIGABYTE DualBIOS™ allows quick and seamless recovery from BIOS damage or failure due to viruses or improper BIOS updating. In addition, GIGABYTE DualBIOS™ now supports 3TB+ (terabyte) hard drive booting without the need for partitioning, and enables more data storage on a single hard drive.


GIGABYTE Hybrid EFI Technology


Quote:
Question 1: When will GIGABYTE introduce an EFI compatible BIOS for their motherboards?
Answer 1: GIGABYTE has already introduced Hybrid EFI Technology that is fully compliant with EFI aware operating systems. This BIOS is shipping now with all GIGABYTE P67 and H67 chipset motherboards, and we have started introducing this BIOS on motherboards using other chipsets with the intention of making is available on all GIGABYTE motherboards.



It's the BIOS version on your Gigabyte motherboard.
After you confirm the motherboard version D/L your motherboard manual from one of the links above, you will need this for reference.
My System SpecsSystem Spec
02 Jun 2011   #15
erickva

MS Windows 7 64-bit SP1
 
 

Hi Dave,

Board version rev 3.0.

Voltages are:
CPU PLL 2.5
DRAM 1.51
DDR VTT 0.75
NB 1.2
NB/PCIe/PLL 1.8
I hope this is what you want.

Also changed the Memory to 1333Mhz:
Attachment 157676

It is pretty cold here CPU is 25C when Idle, I ran some quick tests with Prime95 and it went up to 42C.
I have also downloaded the board manual, just in case.
Anything else?

Cheers,
Erick
My System SpecsSystem Spec
02 Jun 2011   #16
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Change the 'Command Rate' to 2T. This will help stability.

Which slots do you have the RAM cards installed in?
You can count slot 1 as closest to the CPU, should be in slots 1&3.

In the BIOS post the CPU NB VID control voltage, that is the integrated memory controller voltage.
Default is 1.10v, increase it to 1.20v.


Run Prime95 torture test for two hours.
First open Core Temp to monitor CPU temperatures, don't go over 62 C.
Open Prime95 and stop the test if it is running, in Advanced tab select 'Round off checking', in the Options tab select 'Torture Test...', in the window that opens select 'Blend', after 'Number of torture test threads to run' enter 6, then click OK to start the test.

AMD Phenom II X6 1100
My System SpecsSystem Spec
04 Jun 2011   #17
erickva

MS Windows 7 64-bit SP1
 
 

Hi Dave,

You are a legend, I have not changed the command rate or run the CPU test yet, nor changed the voltage.
But reducing the memory frequency to 1333mhz stopped the crashes. It's been 3 days now that it is very stable. It used to crash few times a day!

Cheers,
Erick
My System SpecsSystem Spec
04 Jun 2011   #18
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

That's good news.

If it's stable, your all set.
You might need to do those RAM setting adjustment if you have any more crashes.

Let us know if you have any questions or any more crashes.
My System SpecsSystem Spec
Reply

 Multiple BSOD Windows 7 Pro 64




Thread Tools




Similar help and support threads
Thread Forum
Having Multiple BSOD's and Windows FTS.
Having Multiple BSOD's while running any program. Multiple instances of Windows Failed to Start, as well, especially when first starting up in the morning. A system restore works for 1-3 hours, then it's back to BSOD's. I tried reinstalling Windows, but the problem is never gone for more than a day...
BSOD Help and Support
Multiple BSOD Windows 7 32
Hi I have recently upgrade pretty much everything(motherboard, RAM, PSU). I did a clean install of Windows 7 Pro 32 bit and updated all drivers. Since the installation I have seen regular crashes each time a different error I duno why but I tried running the system on one RAM module and I don't...
BSOD Help and Support
multiple BSOD on windows 7 OS please help.
Just bought my pc a couple of weeks ago, and it's been giving me multiple BSODs quite often. AMD Phenom II x455 3.2gHz Asus M4A87TD/USB3 motherboard Radeon HD 5850 1gig memory OCZ 2x2gig memory 550w true power supply I've attached the minidumps here in this zip file.
BSOD Help and Support
Multiple BSOD in Windows 7
I keep getting the BSOD in my new Windows 7 computer. Here is the latest bug file: Microsoft (R) Windows Debugger Version 6.11.0001.404 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File Mini Kernel Dump File: Only registers and stack trace are available
BSOD Help and Support
Windows 7 HP Multiple BSOD (Pt 2)
Hi everyone. New to the forum so I'm not sure how it's done, but I'm having a bunch of problems with Windows 7 HP and I need some advice. I upgraded from Vista 64 to Windows 7 64-bit and the same problems still exist. It used to happen once a month but now its happening everyday. It just...
BSOD Help and Support
Windows 7 Pro x64 Multiple BSOD
Hello, I have just recently installed Windows 7 Pro x64 on my machine and it has been giving me seemingly random blue screens, about once or twice a day and it does not seem to matter what the computer is doing when it crashes. It seems to run perfectly and then randomly crash. I am attaching my...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:19.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App