Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD: DMP flie attached

25 May 2011   #1
mbaril

windows 7
 
 
BSOD: DMP flie attached

I get this all the time. Please help:


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 4105
Additional information about the problem:
BCCode: a
BCP1: 9712D9D8
BCP2: 00000002
BCP3: 00000001
BCP4: 82CBF540
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1



Is Windows 7 . . .
- x86 (32-bit)
- the original installed OS on the system? NO
- an OEM or full retail version? FULL
- What is the age of system (hardware)? 3 YEARS
- What is the age of OS installation (have you re-installed the OS?) 2 YEARS, YES



My System SpecsSystem Spec
.
25 May 2011   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by mbaril View Post
I get this all the time. Please help:


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 4105
Additional information about the problem:
BCCode: a
BCP1: 9712D9D8
BCP2: 00000002
BCP3: 00000001
BCP4: 82CBF540
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Is Windows 7 . . .
- x86 (32-bit)
- the original installed OS on the system? NO
- an OEM or full retail version? FULL
- What is the age of system (hardware)? 3 YEARS
- What is the age of OS installation (have you re-installed the OS?) 2 YEARS, YES

This one was caused by memory corruption (probably an un-named driver)

Please run memtest and driver verifier

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86.com - Memory Diagnostic

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.



Quote:
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\K\Desktop\052511-24632-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16792.x86fre.win7_gdr.110408-1633
Machine Name:
Kernel base = 0x82c0d000 PsLoadedModuleList = 0x82d55810
Debug session time: Wed May 25 08:38:36.189 2011 (GMT-4)
System Uptime: 0 days 12:16:02.937
Loading Kernel Symbols
...............................................................
................................................................
............................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {9712d9d8, 2, 1, 82cbf540}

Probably caused by : memory_corruption ( nt!MiReleaseConfirmedPageFileSpace+88 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 9712d9d8, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: 82cbf540, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS: GetPointerFromAddress: unable to read from 82d75718
Unable to read MiSystemVaType memory at 82d55160
 9712d9d8 

CURRENT_IRQL:  2

FAULTING_IP: 
nt!MiReleaseConfirmedPageFileSpace+88
82cbf540 2110            and     dword ptr [eax],edx

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xA

PROCESS_NAME:  System

TRAP_FRAME:  8ab3fb84 -- (.trap 0xffffffff8ab3fb84)
ErrCode = 00000002
eax=9712d9d8 ebx=00000100 ecx=00000018 edx=feffffff esi=86578488 edi=86711000
eip=82cbf540 esp=8ab3fbf8 ebp=8ab3fc28 iopl=0         nv up ei pl nz na pe nc
cs=0008  ss=0010  ds=0023  es=0023  fs=0030  gs=0000             efl=00010206
nt!MiReleaseConfirmedPageFileSpace+0x88:
82cbf540 2110            and     dword ptr [eax],edx  ds:0023:9712d9d8=????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from 82cbf540 to 82c537fb

STACK_TEXT:  
8ab3fb84 82cbf540 badb0d00 feffffff 85a8f800 nt!KiTrap0E+0x2cf
8ab3fc28 82c73c32 00000000 850e4e98 000c0000 nt!MiReleaseConfirmedPageFileSpace+0x88
8ab3fc9c 82e3ee1e b494c008 b494c008 b494c030 nt!MiDeleteSegmentPages+0x2d3
8ab3fccc 82c38f09 b494c008 00000000 00000000 nt!MiSegmentDelete+0xec
8ab3fd28 82c38e21 84cc5448 00000000 00000000 nt!MiProcessDereferenceList+0xdb
8ab3fd50 82e1b9df 00000000 a9acb991 00000000 nt!MiDereferenceSegmentThread+0xc5
8ab3fd90 82ccd219 82c38d5a 00000000 00000000 nt!PspSystemThreadStartup+0x9e
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x19


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!MiReleaseConfirmedPageFileSpace+88
82cbf540 2110            and     dword ptr [eax],edx

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!MiReleaseConfirmedPageFileSpace+88

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP:  4d9fd915

IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  0xA_nt!MiReleaseConfirmedPageFileSpace+88

BUCKET_ID:  0xA_nt!MiReleaseConfirmedPageFileSpace+88

Followup: MachineOwner
---------
My System SpecsSystem Spec
Reply

 BSOD: DMP flie attached




Thread Tools




Similar help and support threads
Thread Forum
Offline Folder sync issue, Win 7 Client Server 2003 Flie Server.
Hi, I am having an issue with offline files created offline syncing back to the server. I have set up a network share to be available offline on a client computer. All files are available offline without issue. Here is the issue however. If I set the folder to work offline any file I create in...
Network & Sharing
Prevent removing attached VHD, from safely removed attached media
Hi all, I was just wondering if anyone knows a way to prevent users from removing a attached VHD from "Safely remove hardware and eject media", We have had multiple users eject the VHD when they are going to unplug their USB and they are ejecting the attached VHD insted. Any help would be...
Virtualization
BSOD while browsing Facebook, STOP: 0x00000101; Image of BSOD attached
Hey guys! I was browsing Facebook and exactly when I wanted to play a video I got this BSOD: http://img96.imageshack.us/img96/3452/jmej.jpg (It stuck on Initializing disk for crash dump so I force restarted the computer if this is for any help) Could you help me find out why I got it...
BSOD Help and Support
"Flie open" window doesn't display correctly
Hi there, I have a problem running Patran 2007 in Windows 7, the program seems to run fine, and I am able to open data bases and work on them. The problem comes in when I want to either save the database, open a new database or just open a current database. For each of these functions a new...
General Discussion
BSOD during Bad Company 2, unknown error, jcgriff2 BSOD files attached
I recently built a new system. When playing Bad Company 2 I have gotten a consistent BSOD about 1/2 hour into playing. I am not really familiar with BSOD codes and my computer restarted so quickly I was unable to get the exact code. When I play again I will try to get the code and add it to the...
BSOD Help and Support
Random BSOD... Help please (BSOD dump & system health report attached)
Hello. I am experiencing some random BSODs. It happens no matter what program is running. It could be in a game, surfing the internet, or listening to music. It is very random. Happens about once every two days on average. Some days are worse. I have tried running driver verifier, but it would...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:06.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App