bug check 1001 windows 7 32bit helppp

got two errors of bug check in an hour pc automatic rebooted once and got hanged 2nd time
i have attached both the files plzz help me and tell me whats the problem with it thx in advance :)

jay93 said:

got two errors of bug check in an hour pc automatic rebooted once and got hanged 2nd time
i have attached both the files plzz help me and tell me whats the problem with it thx in advance :)

two problems

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp,sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads

when you're done you can use this Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) in its place.


two hardware


Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

You can read more on this error and what to try here... Stop 0x124 - what it means and what to try Stop 0x124 - what it means and what to try

i use alcohol should i remove it ? and non of my system is overclocked yesterday when i turned on my pc i got blue screen and i rebooted it and then my screen frozed when the name of motherboard appears i again rebooted and pc did not started i removed one of mine rams from the second sloth and it booted but both did not booted nor a single 1 booted in the second sloth after few hours i inserted both the sticks and it booted but after 15 min display went i shutted down the machine and turned it on after 2 hrs and it booted but was damm slow so i formatted it and now it was working well and damm again bug check error is coming and everytime i shutdown and turn on my pc i get an error named WHEA-logger event id 20
A fatal hardware error has occurred.

Component: AMD Northbridge
Error Source: Machine Check Exception
Error Type: Sync Error
Processor ID: 0

The details view of this entry contains further information.
it does not come on restart m running on 3gb ram amd athlonx2 240 and asus m2a74-am motherboard

hey i download the duplexsecure but it says it not a valid win32 application

jay93 said:

hey i download the duplexsecure but it says it not a valid win32 application

The download didnt complete. try it again

yea done removed it
i hav'nt installed onboard gfx drivers would t b causing this issue 0x124

jay93 said:

yea done removed it
i hav'nt installed onboard gfx drivers would t b causing this issue 0x124

124 is hardware. I would start by checking ram,

run memtest.
Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

i used windows memtest bit it din find anything

and thers no thermal paste between my heat-sink and processor

jay93 said:

i used windows memtest bit it din find anything

windows is not memtest. windows memory diagnostic does not stress the ram to see if it will fail.You need to use memtest.