Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: bug check 1001 windows 7 32bit helppp

30 May 2011   #1
jay93

windows 8 64 bit
 
 
bug check 1001 windows 7 32bit helppp

got two errors of bug check in an hour pc automatic rebooted once and got hanged 2nd time
i have attached both the files plzz help me and tell me whats the problem with it thx in advance


My System SpecsSystem Spec
.
30 May 2011   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by jay93 View Post
got two errors of bug check in an hour pc automatic rebooted once and got hanged 2nd time
i have attached both the files plzz help me and tell me whats the problem with it thx in advance

two problems

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp,sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads

when you're done you can use this Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) in its place.


two hardware


Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

You can read more on this error and what to try here... Stop 0x124 - what it means and what to try Stop 0x124 - what it means and what to try
My System SpecsSystem Spec
30 May 2011   #3
jay93

windows 8 64 bit
 
 

i use alcohol should i remove it ? and non of my system is overclocked yesterday when i turned on my pc i got blue screen and i rebooted it and then my screen frozed when the name of motherboard appears i again rebooted and pc did not started i removed one of mine rams from the second sloth and it booted but both did not booted nor a single 1 booted in the second sloth after few hours i inserted both the sticks and it booted but after 15 min display went i shutted down the machine and turned it on after 2 hrs and it booted but was damm slow so i formatted it and now it was working well and damm again bug check error is coming and everytime i shutdown and turn on my pc i get an error named WHEA-logger event id 20
A fatal hardware error has occurred.

Component: AMD Northbridge
Error Source: Machine Check Exception
Error Type: Sync Error
Processor ID: 0

The details view of this entry contains further information.
it does not come on restart m running on 3gb ram amd athlonx2 240 and asus m2a74-am motherboard
My System SpecsSystem Spec
.

30 May 2011   #4
jay93

windows 8 64 bit
 
 

hey i download the duplexsecure but it says it not a valid win32 application
My System SpecsSystem Spec
30 May 2011   #5
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by jay93 View Post
hey i download the duplexsecure but it says it not a valid win32 application
The download didnt complete. try it again
My System SpecsSystem Spec
31 May 2011   #6
jay93

windows 8 64 bit
 
 

yea done removed it
i hav'nt installed onboard gfx drivers would t b causing this issue 0x124
My System SpecsSystem Spec
31 May 2011   #7
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by jay93 View Post
yea done removed it
i hav'nt installed onboard gfx drivers would t b causing this issue 0x124
124 is hardware. I would start by checking ram,

run memtest.
Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.
My System SpecsSystem Spec
01 Jun 2011   #8
jay93

windows 8 64 bit
 
 

i used windows memtest bit it din find anything
My System SpecsSystem Spec
01 Jun 2011   #9
jay93

windows 8 64 bit
 
 

and thers no thermal paste between my heat-sink and processor
My System SpecsSystem Spec
01 Jun 2011   #10
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by jay93 View Post
i used windows memtest bit it din find anything
windows is not memtest. windows memory diagnostic does not stress the ram to see if it will fail.You need to use memtest.
My System SpecsSystem Spec
Reply

 bug check 1001 windows 7 32bit helppp




Thread Tools




Similar help and support threads
Thread Forum
PLEASE helppp BSOD
Can anyone help on what is causing this blue screen. It happens pretty frequently and usually when i run games. Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033 Additional information about the problem: BCCode: 1e ...
BSOD Help and Support
BSOD Event ID 1001 Bug Check 0x00000124 caused by ntoskrnl.exe driver
Hello, When I first started to encounter BSOD issues I was originally getting event id 18, Machine check exception, Translation Lookaside Buffer errors which I assumed was an issue with my CPU. I contacted Intel and they stated to me that Windows 7 was not correctly dumping the right information...
BSOD Help and Support
After build my own PC ( Helppp )
Hi ! i've just built my own CPU , then completed building and connected everything to my monitor. All the CPU was working , LED turned on , fans working. But my monitor did not display anything. note: when i turn on my CPU , i did not hear any "beep" sound when start a computer. anyone help me...
PC Custom Builds and Overclocking
BSOD - Error 1001 - Bug Check
Windows 7 -x64 Windows 7 Ultimate Full Retail System Hardware is all new First Install of the OS 1 x LG 22X DVD Burner - Bulk Black SATA Model GH22LS50 LightScribe Support - OEM 1 x SAMSUNG EcoGreen F2 HD103SI 1TB 5400 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive 1 x OCZ...
BSOD Help and Support
BSOD Event 1001 Source Bug Check
Windows 7 -x64 Windows 7 Ultimate Full Retail System Hardware is all new First Install of the OS 1 x LG 22X DVD Burner - Bulk Black SATA Model GH22LS50 LightScribe Support - OEM 1 x SAMSUNG EcoGreen F2 HD103SI 1TB 5400 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive 1 x OCZ...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:40.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App