BSOD on new rig "PAGE_FAULT_IN_NONPAGED_AREA ntoskrnl.exe"

Sliverr · 03 Jun 2011

Hey guys, I recently built a computer with these specs:

Intel Core i5-2500K Sandy Bridge 3.3GHz
ASRock P67 EXTREME4 (B3) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Patriot Gamer 2 Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333
MSI R6970-2PM2D2GD5 Radeon HD 6970 2GB
CORSAIR CMPSU-750TX 750W ATX12V v2.2

I ran the computer with a hard drive with Windows 7 Ultimate x64 I used on my previous build. While running The Witcher 2 I got a BSOD, which happened again and again, only once while I wasn't running The Witcher 2. I ran memtest, which showed up with errors. I took one stick out, ran it, came up with errors, popped the other stick in and got errors as well. Is this purely a case of fault RAM? Whats the chances of both sticks being bad? ALL my fan speeds are normal, nothing is overheating from what I can tell.

Here is the folder gotten from running Windows NT6.
Here are the results of the system health report.
Here is the link to a rar containing all of the minidumps compiled.

ANY sort of help will be appreciated, this is really starting to get on my nerves. I really hope I did this post right, I'm getting ready to go crazy.

yowanvista · 03 Jun 2011

Sliverr said:

Hey guys, I recently built a computer with these specs:

Intel Core i5-2500K Sandy Bridge 3.3GHz
ASRock P67 EXTREME4 (B3) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Patriot Gamer 2 Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333
MSI R6970-2PM2D2GD5 Radeon HD 6970 2GB
CORSAIR CMPSU-750TX 750W ATX12V v2.2

I ran the computer with a hard drive with Windows 7 Ultimate x64 I used on my previous build. While running The Witcher 2 I got a BSOD, which happened again and again, only once while I wasn't running The Witcher 2. I ran memtest, which showed up with errors. I took one stick out, ran it, came up with errors, popped the other stick in and got errors as well. Is this purely a case of fault RAM? Whats the chances of both sticks being bad? ALL my fan speeds are normal, nothing is overheating from what I can tell.

Here is the folder gotten from running Windows NT6.
Here are the results of the system health report.
Here is the link to a rar containing all of the minidumps compiled.

ANY sort of help will be appreciated, this is really starting to get on my nerves. I really hope I did this post right, I'm getting ready to go crazy.

Dumps show Memory Corruption, test each stick individually. If both reported errors you should buy new RAM sticks

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80002f49115, Address of the exception record for the exception that caused the bugcheck
Arg3: fffff88006385c60, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP: 
nt!MiGetTopLevelPfn+65
fffff800`02f49115 4c8b4928        mov     r9,qword ptr [rcx+28h]

CONTEXT:  fffff88006385c60 -- (.cxr 0xfffff88006385c60)
rax=000040000010cf30 rbx=000fffffffffffff rcx=000bfa800326d900
rdx=fffffff555768223 rsi=fffffa8003bec000 rdi=0000058000000000
rip=fffff80002f49115 rsp=fffff88006386638 rbp=0000000000000004
 r8=fffffe0006386670  r9=000040000010cf30 r10=fffff880063866e8
r11=0000000000000001 r12=000000003ffffff8 r13=0000000000000000
r14=fffff6fb40000000 r15=0000000fffffffff
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!MiGetTopLevelPfn+0x65:
fffff800`02f49115 4c8b4928        mov     r9,qword ptr [rcx+28h] ds:002b:000bfa80`0326d928=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  svchost.exe

CURRENT_IRQL:  2

LAST_CONTROL_TRANSFER:  from 0000000000000000 to fffff80002f49115

STACK_TEXT:  
fffff880`06386638 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!MiGetTopLevelPfn+0x65


FOLLOWUP_IP: 
nt!MiGetTopLevelPfn+65
fffff800`02f49115 4c8b4928        mov     r9,qword ptr [rcx+28h]

SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  nt!MiGetTopLevelPfn+65

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP:  4d9fdd34

STACK_COMMAND:  .cxr 0xfffff88006385c60 ; kb

IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0x3B_nt!MiGetTopLevelPfn+65

BUCKET_ID:  X64_0x3B_nt!MiGetTopLevelPfn+65

Followup: MachineOwner
---------