BSOD again

Page 1 of 2 12 LastLast

  1. Posts : 578
    Windows 7 Home Premium x64, Windows 8 Pro
       #1

    BSOD again


    I hace recently encountered new BSODs on my laptop. This time gives an error description about System_Restore_Exception.

    I have recently reinstalled Windows and the recent updates installed. Also the pc is cleaned for spywares and viruses, as it was done last time about for 10 hours ago.
      My Computer


  2. Posts : 578
    Windows 7 Home Premium x64, Windows 8 Pro
    Thread Starter
       #2

    any comments?
      My Computer


  3. Posts : 13,354
    Windows 7 Professional x64
       #3

    Hello,

    Run driver verifier: Driver Verifier - Enable and Disable

    When you get more BSODs, post back with a full jcgriff2 report: https://www.sevenforums.com/crashes-d...tructions.html

    ...Summary of the dumps:
    Code:
    
    Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
    Debug session time: Wed Jun 15 05:05:46.033 2011 (UTC - 4:00)
    System Uptime: 0 days 0:24:37.484
    *** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
    Probably caused by : ntkrnlmp.exe ( nt!woutput_l+278 )
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    BUGCHECK_STR:  0x3B
    PROCESS_NAME:  iexplore.exe
    FAILURE_BUCKET_ID:  X64_0x3B_nt!woutput_l+278
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
    Debug session time: Wed Jun 15 04:40:33.164 2011 (UTC - 4:00)
    System Uptime: 0 days 0:40:17.616
    *** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
    Probably caused by : ntkrnlmp.exe ( nt!woutput_l+35e )
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    BUGCHECK_STR:  0x3B
    PROCESS_NAME:  cleanmgr.exe
    FAILURE_BUCKET_ID:  X64_0x3B_nt!woutput_l+35e
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
    Debug session time: Mon Jun 13 06:52:33.315 2011 (UTC - 4:00)
    System Uptime: 0 days 1:01:13.766
    *** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
    *** ERROR: Module load completed but symbols could not be loaded for tcpip.sys
    Probably caused by : tcpip.sys ( tcpip+6687e )
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    BUGCHECK_STR:  0xD1
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  X64_0xD1_tcpip+6687e
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
      
    
      My Computer


  4. Posts : 578
    Windows 7 Home Premium x64, Windows 8 Pro
    Thread Starter
       #4

    thank you, I update the drivers.
      My Computer


  5. Posts : 578
    Windows 7 Home Premium x64, Windows 8 Pro
    Thread Starter
       #5

    I have experienced a couple of times since I made this thread that my computer at the beginning of start up, needed to check for failuers. Even thoguh I didn't have any problems during the shut down, I received this message two times now, a check by the system didn't show any failure.
      My Computer


  6. Posts : 13,354
    Windows 7 Professional x64
       #6

    Could you post a screenshot of that message?

    A Preferred Method of Uploading/Posting Screen Shots
      My Computer


  7. Posts : 578
    Windows 7 Home Premium x64, Windows 8 Pro
    Thread Starter
       #7

    I have since my last post had 3 BSOD's all about System Restore Exception.

    What drivers do you mean it needs to get updated?
    I have recently made a fresh Windows installation on my laptop, and Windows is udated to SP1.
    I will try to snap a picture next time the system check up message shows up again.
      My Computer


  8. Posts : 578
    Windows 7 Home Premium x64, Windows 8 Pro
    Thread Starter
       #8

    I have tried to clean up my laptop with CCleaner, and after it gives BSOD which means that it can not remove those files. I have even tried to clean them one by one but it gives BSOD again.
    I guess some how my problem lies in these files that is collected, but I can not seem to remove them.
    Do you know other ways for removing these files?
      My Computer


  9. Posts : 578
    Windows 7 Home Premium x64, Windows 8 Pro
    Thread Starter
       #9

    I also experience it when trying to start Real player, system shows the same error as I mentioned and restarts. I have defragmented the hard drive.
      My Computer


  10. Posts : 13,354
    Windows 7 Professional x64
       #10

    Just a hunch, uninstall PeerGuardian, see if that improves matters any.

    Driver Verifier still needs to be run. See here: Driver Verifier - Enable and Disable

    When you get more BSODs, please upload a jcgriff2 report: https://www.sevenforums.com/crashes-d...tructions.html

    ...Summary of the dumps:
    Code:
    
    Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
    Debug session time: Thu Jun 16 15:23:05.706 2011 (UTC - 4:00)
    System Uptime: 0 days 2:43:15.768
    *** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
    Probably caused by : ntkrnlmp.exe ( nt!woutput_l+35e )
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    BUGCHECK_STR:  0x3B
    PROCESS_NAME:  iexplore.exe
    FAILURE_BUCKET_ID:  X64_0x3B_nt!woutput_l+35e
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
    Debug session time: Thu Jun 16 15:37:22.633 2011 (UTC - 4:00)
    System Uptime: 0 days 0:13:28.084
    *** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
    Probably caused by : ntkrnlmp.exe ( nt!woutput_l+35e )
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    BUGCHECK_STR:  0x3B
    PROCESS_NAME:  CCleaner64.exe
    FAILURE_BUCKET_ID:  X64_0x3B_nt!woutput_l+35e
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
    Debug session time: Thu Jun 16 15:47:49.279 2011 (UTC - 4:00)
    System Uptime: 0 days 0:09:54.357
    *** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
    Probably caused by : ntkrnlmp.exe ( nt!woutput_l+35e )
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    BUGCHECK_STR:  0x3B
    PROCESS_NAME:  CCleaner64.exe
    FAILURE_BUCKET_ID:  X64_0x3B_nt!woutput_l+35e
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    Last edited by Jonathan_King; 19 Jun 2011 at 05:25.
      My Computer


 
Page 1 of 2 12 LastLast

Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd
All times are GMT -5. The time now is 18:17.
Find Us