Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD over&over again

15 Jun 2011   #1
hoorooz

Windows 7 Ultimate x64
 
 
BSOD over&over again

Hello people,

Ever since I got this new system, I keep getting the BSOD's.
They come up with different descriptions, but with same annoyance level.
I have even reinstalled windows, twice, to no avail.

The detailed system specs are in my profile.

Thank you very much,
Filip


My System SpecsSystem Spec
.
15 Jun 2011   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by hoorooz View Post
Hello people,

Ever since I got this new system, I keep getting the BSOD's.
They come up with different descriptions, but with same annoyance level.
I have even reinstalled windows, twice, to no avail.

The detailed system specs are in my profile.

Thank you very much,
Filip

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp,sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads

when you're done you can use this Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) in its place.
My System SpecsSystem Spec
15 Jun 2011   #3
hoorooz

Windows 7 Ultimate x64
 
 

Cheers, mate.
I will proceed with the removal, and I will get back with the results.

Thanks a bunch!
My System SpecsSystem Spec
.

15 Jun 2011   #4
hoorooz

Windows 7 Ultimate x64
 
 

After uninstalling the Daemon tools soft along with the driver, using the tool you recommended, I rebooted my system.
After the reboot, in the middle of an MS Security Essentials update, the BSOD appeared again.
What should I do now?
My System SpecsSystem Spec
15 Jun 2011   #5
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by hoorooz View Post
After uninstalling the Daemon tools soft along with the driver, using the tool you recommended, I rebooted my system.
After the reboot, in the middle of an MS Security Essentials update, the BSOD appeared again.
What should I do now?
Upload the DMP file and download malwarebytes and run it in safe mode just in case.
My System SpecsSystem Spec
15 Jun 2011   #6
hoorooz

Windows 7 Ultimate x64
 
 

Hi there,

Right in the middle of the scan with malware bytes, i got the BSOD again.
It was in safe mode.
The dump files report is generated after this BSOD.

Thank you.
My System SpecsSystem Spec
15 Jun 2011   #7
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by hoorooz View Post
Hi there,

Right in the middle of the scan with malware bytes, i got the BSOD again.
It was in safe mode.
The dump files report is generated after this BSOD.

Thank you.
Newest related to memory corruption. Malwarebytes was running at the time but I am wondering if this isnt malware.

Do you have a backup from prior to the problem?
My System SpecsSystem Spec
15 Jun 2011   #8
hoorooz

Windows 7 Ultimate x64
 
 

This is a new system that I just built.

Immediately after I finished installing Windows for the first time, on this "virgin" system, let's say a few hours after the system install, the BSOD appeared.

This is also the reason of me not having a backup.
Firstly I installed a Win7 x86, and thought it was a problem related to the amount of ram being bigger than the OS sees. So I formatted my C drive and installed a Win 7 x64. Same problems with the BSOD. I reformatted my system again.

So, now, I'm at the 3rd system installed, and again, with the same BSOD issues.

What now?
My System SpecsSystem Spec
15 Jun 2011   #9
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by hoorooz View Post
This is a new system that I just built.

Immediately after I finished installing Windows for the first time, on this "virgin" system, let's say a few hours after the system install, the BSOD appeared.

This is also the reason of me not having a backup.
Firstly I installed a Win7 x86, and thought it was a problem related to the amount of ram being bigger than the OS sees. So I formatted my C drive and installed a Win 7 x64. Same problems with the BSOD. I reformatted my system again.

So, now, I'm at the 3rd system installed, and again, with the same BSOD issues.

What now?
With 3 OS installs we can pretty much rule out software (unless you have installed something like a malware app or firewall that may be cuasing it) so we now need to start on hardware

Lets start with memory

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.
My System SpecsSystem Spec
21 Jun 2011   #10
hoorooz

Windows 7 Ultimate x64
 
 

memory sticks (ram) turned ok, after 6-7 cycles of scanning, each stick on a different slot also.
2day another BSOD, this time reporting ntfs.sys, "page_fault_in_nonpage_area"
you will find the latest scan attached.

thanks a bunch
My System SpecsSystem Spec
Reply

 BSOD over&over again




Thread Tools



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:29.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App