Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD New Computer

21 Jun 2011   #1

Windows 7 Home Premium 64 bit
BSOD New Computer

Would appreciate your help with this few day old computer that is suffering BSOD few times.
Computer seems to work well except when I leave it alone for awhile I return to find the BSOD.

File attached

Thank you kindly.

My System SpecsSystem Spec
21 Jun 2011   #2

Windows 10 Pro x64, Arch Linux

BSOD may be cause by Sensorview from STV Software - Home, remove this software
sensorsview32_64.sys        fffff880`02f7c000    fffff880`02f83000    0x00007000    0x488b26c1    26/07/2008 17:29:37
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error. Also see
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arg1: 0000000000000020, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc000009d, error status (normally i/o status code)
Arg3: fffffa800f79f7c8, current process (virtual address for lock type 3, or PTE)
Arg4: 0000000000000000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Debugging Details:


DISK_HARDWARE_ERROR: There was error with disk hardware

BUGCHECK_STR:  0x7a_c000009d





LAST_CONTROL_TRANSFER:  from fffff80002d03bec to fffff80002ccbf00

fffff880`035087e8 fffff800`02d03bec : 00000000`0000007a 00000000`00000020 ffffffff`c000009d fffffa80`0f79f7c8 : nt!KeBugCheckEx
fffff880`035087f0 fffff800`02cb5e67 : fffffa80`0f79f760 00000000`c000009d 00000000`00000000 fffffa80`0f79f7f8 : nt! ?? ::FNODOBFM::`string'+0x4c830
fffff880`035088b0 fffff800`02ca892f : fffffa80`0d088680 fffffa80`0d0886d0 00000000`00000010 00000000`00000246 : nt!IopCompletePageWrite+0x57
fffff880`035088e0 fffff800`02cd325d : fffffa80`0d088680 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDeliverApc+0x1d7
fffff880`03508960 fffff800`02ccf54b : 00000000`60000001 00000000`00000103 fffffa80`00000000 fffff880`01a97e91 : nt!KiCommitThreadWait+0x3dd
fffff880`035089f0 fffff800`02c64a8f : fffffa80`00000002 fffff880`03508ce0 00000000`00000001 fffffa80`00000013 : nt!KeWaitForMultipleObjects+0x271
fffff880`03508ca0 fffff800`02f6f166 : fffffa80`0d088680 00040a0c`00040a0c 00000000`00000080 00000000`00000001 : nt!MiModifiedPageWriter+0xcf
fffff880`03508d00 fffff800`02caa486 : fffff880`03164180 fffffa80`0d088680 fffff880`0316efc0 00060c10`00060c10 : nt!PspSystemThreadStartup+0x5a
fffff880`03508d40 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxStartSystemThread+0x16


nt! ?? ::FNODOBFM::`string'+4c830
fffff800`02d03bec cc              int     3


SYMBOL_NAME:  nt! ?? ::FNODOBFM::`string'+4c830

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  ntkrnlmp.exe


FAILURE_BUCKET_ID:  X64_0x7a_c000009d_nt!_??_::FNODOBFM::_string_+4c830

BUCKET_ID:  X64_0x7a_c000009d_nt!_??_::FNODOBFM::_string_+4c830

Followup: MachineOwner
My System SpecsSystem Spec
21 Jun 2011   #3

Windows 7 Home Premium 64 bit

Thanks for the quick reply.

Out of curiousity can you walk me through how you came up with Sensorsview as possibly the problem?

Thanks again!
My System SpecsSystem Spec

21 Jun 2011   #4

Microsoft Community Contributor Award Recipient

Windows 7 x64

bugcheck string and arg3 I would guess.

Bugchecks almost always point to a core windows file that was crashed, the trick is backing it to what actually crashed it though so the straight forward looking data that
IMAGE_NAME: ntkrnlmp.exe

actually crashed is pretty much useless.
My System SpecsSystem Spec
21 Jun 2011   #5

Windows 10 Pro x64, Arch Linux

Quote   Quote: Originally Posted by billp View Post
Thanks for the quick reply.

Out of curiousity can you walk me through how you came up with Sensorsview as possibly the problem?

Thanks again!
It uses an old driver which can cause BSODs
My System SpecsSystem Spec
21 Jun 2011   #6

Windows 7 Home Premium 64 bit

Thanks again. I appreciate it.
My System SpecsSystem Spec

 BSOD New Computer

Thread Tools

Similar help and support threads
Thread Forum
Disappearing Icons, Computer Crashes, BSOD, computer unusable
I have been having a long running problem with my computer. It started out as a lack of internet access which turned out tI o be a bad virus. I fixed that problem by doing a complete reformat of my system. I thought that that would fix the problem and it did for a bit. After a week or so I...
General Discussion
BSOD after I turn Computer NEW Computer on, or whilst sleeping
New computer keeps blue screening during or after my computer goes to sleep. Was told to upload this, and also it says part of the reason is in the Minidump folder or the Temp folder.
BSOD Help and Support
Computer suddenly froze, then a BSOD when restarting the computer.
As the title states my computer froze. It has frozen two times within 3 or 4 hours now, and on the last restart i had a BSOD straight after entering my password and logging into windows(Did not get the desktop). After another restart I've had no problems. Did a scan with Microsoft Security...
BSOD Help and Support
BSOD when starting computer in morning/bran new computer
Hi, iv decided to get some input to try and resolve this issue im having with my newly constructed PC. i will get straight to the point. i have just put together these new parts. Intel i5-3450 LGA1155 ASRock Z77 Extreme 4 8 gigs ballistix by crucial 2-4gb ddr3 1600 (pc3-12800) radeon...
BSOD Help and Support
Computer Freezes, then shutdown BSOD Computer NO signal
Hi I need help since my computer freezes randomly lately and BSOD with Locale Id: 13321 Yes, I said randomly, Now I'm lucky that my computer didn't freeze but if I shut this down and use it again later or tomorrow it may freeze then BSOD again. Problem Signature Problem Event name:...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:11.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App