Today while I'm trying to boot my computer, it just hangs at post screen and last forever
Here's what my system reads when it hangs
I have little computer knowledge and don't even know where the problem isChecking NVRAM..
Initializing USB Controllers ..Done.
1536MB OK
Auto-Detecting Pri Master..IDE Hard DIsk
Auto-Detecting Sec Master..ATAPI CD-ROM
Pri Master: ST3100011A 3.02
Ultra DMA Mode-5, S.M.A,R.T. Capable and Status OK
Please help me
Thank you
Hi, here's what I got after I reset my BIOS
It just got this screen and stays on that screen forever, I try to press DEL and TAB but nothing appears.
When you boot up, then the POST (Power On Self Test) will issue a few beeps to signal that all is not in order.
Do you hear any beeps when you power up?
You must shutdown the computer and then power up the computer to perform this test.
When I had this happen to me, I think it went away when I unplugged my iPod Touch from the computer. May have been a BIOS issue with the device, I'm not sure.
@karlsnooks I did not hear any beep sound at POST
@DocBrown It's a desktop and I disconnect all devices except my hard drive, my disc burner, and VGA connnector
@magnetite actually the last thing I did when I turn off my computer is sync my music into my ipod, and the next day this system hangs at POST happens, it might be
Hi, I removed my hard drive and my computer finally get into BIOS setup, is that mean my hard drive is dead and need a new one?
but the hard drive itself is still running(I didn't unplug the power for my hard drive), is that means my hard drive is OK?
omg, idk where's the problem
Quote