Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD STOP error ntfs & ntoskrnl

12 Jul 2011   #11
Deman

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by MvdB View Post
Quote   Quote: Originally Posted by Deman View Post
I already tried that but for some reason its corrupted. I also even tried pulling the file from w7 downloads but they don't even have that file.
Could it work if I pull it from my laptop which is a 32bit and home edition? Or should it be the exact same windows?

Do you have w7 ultimate 64bit? Maybe you could give me the file because I just cant find it anywhere.
This is very strange. This file is not something special. All it is is an automated HTML file.. a help file about diskmanagement. Not critical at all. Except if it was infected by malware... I would not even expect sfc to have a problem with it...

You still have the .old don't you? What size is it? should be 85kB. If you rename it to original (diskmngmnt.chm) do you get the correct icon?
Attachment 164626

If yours looks identical to this, and when scanned, is clean... double click and check if you get a help file?
No virus, old file is same as the new one ofcourse since he gets it from the same location. Exact size is 86,1kb displayed in the column as 87kb.

I also had a new BSOD today. Same ntfs.sys crap. NTFS_SYSTEM_FILE 0x00000024.
The amount of BSOD's start stacking. Now I have at least one a day. I think my pc will die again soon.

It's like the BSOD starts once a week, than it starts to do twice a week until a few times a day and than it wont boot windows any more.

New dump included


My System SpecsSystem Spec
.
12 Jul 2011   #12
Deman

Windows 7 Ultimate x64
 
 

K, since no suggestion has been made yet I will try one of my many thousands try's
Reading this:
Quote:
a test on the system the first thing in the morning (when the system is cold) and then another after the system has run for an hour or two. If it doesn't run in Windows, run the memory test for hour, then shut down and start it over. This is because we've been seeing some issues with test results that differ when the system is cold and when it's warm.
Shows me that running memtest on usb in the evening for 15 hours ain't good enough. I will now try to run memtest tomorrow when I wake up.

Edit: I found this, http://www.samsung.com/global/busine...bbs_msg_id=308
I5 2500k is P67/H67 right? So if my memory is fine when I start my pc cold than I could try updating firmware.
My System SpecsSystem Spec
13 Jul 2011   #13
MvdB

Windows 7 64b Ultimate
 
 

I'm not sure yet. Is you MOBO the B3 version or not?

If it is.. I'd only download latest drivers from here: GIGABYTE - Motherboard - Socket 1155 - GA-PH67A-UD3-B3 (rev. 1.1)
My System SpecsSystem Spec
.

13 Jul 2011   #14
Deman

Windows 7 Ultimate x64
 
 

I already upated my bios to te max. It was quiet a hassle since they made a version which could only be updated with crappy @bios program. My motherboard rev is 1.0.
I think the hdd firmware update will fix it, what do you think about it?
My System SpecsSystem Spec
13 Jul 2011   #15
MvdB

Windows 7 64b Ultimate
 
 

Quote   Quote: Originally Posted by Deman View Post
I already upated my bios to te max. It was quiet a hassle since they made a version which could only be updated with crappy @bios program. My motherboard rev is 1.0.
I think the hdd firmware update will fix it, what do you think about it?
mmm not sure yet. But in my previous post I was not talking about firmware or BIOS but normal system drivers that you need to update from the link I provided (if mobo = a B3 version, there is a similar page there to download drivers from in acse you have the older non-B3).
My System SpecsSystem Spec
13 Jul 2011   #16
Deman

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by MvdB View Post
Quote   Quote: Originally Posted by Deman View Post
I already upated my bios to te max. It was quiet a hassle since they made a version which could only be updated with crappy @bios program. My motherboard rev is 1.0.
I think the hdd firmware update will fix it, what do you think about it?
mmm not sure yet. But in my previous post I was not talking about firmware or BIOS but normal system drivers that you need to update from the link I provided (if mobo = a B3 version, there is a similar page there to download drivers from in acse you have the older non-B3).
Ok, I'll do that. Should I install the sata raid driver? No clue what it is. Something about my hdd but thats all I know. There is some preinstall and a normal driver. What to do? Both? Or only the normal one and not the preinstall?
My System SpecsSystem Spec
13 Jul 2011   #17
MvdB

Windows 7 64b Ultimate
 
 

Yes, the normal one.
My System SpecsSystem Spec
13 Jul 2011   #18
Deman

Windows 7 Ultimate x64
 
 

I installed all the others except the sata raid driver.
The sata raid driver says my computer does not meet the minimum requirements for this installation.

Do I need the preinstall? Or is it just not compatible with my pc?

Edit: I have GA-PH67A-UD3 (rev. 1.0)
My System SpecsSystem Spec
13 Jul 2011   #19
MvdB

Windows 7 64b Ultimate
 
 

Thats why I needed the version of your mobo. It is not B3 so you need the other link:
GIGABYTE - Motherboard - Socket 1155 - GA-PH67A-UD3 (rev. 1.0)

These intel sata drivers should be fine.
My System SpecsSystem Spec
13 Jul 2011   #20
Deman

Windows 7 Ultimate x64
 
 

They aren't I tryed them, I installed all the drivers for the correct motherboard but the sata one doesnt works.

Edit: Wait I'll reboot pc. Nope, reboot didn't fix it. It keeps saying I don't have the minimum requirements. What are the minimum? :'(

Anyway, should I resort to the pre driver? Maybe the pre driver is needed for the normal one.
Do I even have sata raid? In device management I see my HDD as an ata.
According to my dad I don't have a raid setup, it'll be in the future though because I have two 1tb hdd's. But I first wanna solve the bsod before I put the next one in.
So I guess I should update the hdd firmware?
My System SpecsSystem Spec
Reply

 BSOD STOP error ntfs & ntoskrnl




Thread Tools




Similar help and support threads
Thread Forum
BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys
Hi, to make things easier for you,below is the Bug Check String, Driver, and crash address SYSTEM_SERVICE_EXCEPTION___dxgmms1.sys___ntoskrnl.exe+75bc0 MEMORY_MANAGEMENT_______ntoskrnl.exe____ntoskrnl.exe+75bc0 SYSTEM_SERVICE_EXCEPTION___ntoskrnl.exe____ntoskrnl.exe+75bc0...
BSOD Help and Support
BSOD error STOP 1e tcpip.sys and ntoskrnl.exe
Hello on Tuesday and Wednesday of last week my computer BSOD once on each day. For the past week it's been fine until yesterday and Today where it has BSOD multiple times. I wasn't playing any games and the programs I were running were Steam, utorrent 2.2.1 and spotify. I just let my computer sit...
BSOD Help and Support
BSoD at random times, error 0x000000C4 (STOP): Ntfs.sys
Hello, I have been encountering some BSoD trouble in the recent past. In the most recent crashed, the Ntfs.sys filename appeared on the BSoD (it was previously some other one). Following, the BSoD Analysis tutorial, I grabbed the following information during the inspection of the most recent...
BSOD Help and Support
BSOD error Stop 0xa - IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe
So I've been done a lot of testing on my own, then finally went through about a dozen similar topics and I just can't figure out what's wrong on my own. First, my system specs: Windows Ultimate x64 i7 920 Asus P6T mobo 12GB RAM ( two 3x2gb tri channels ) 300GB velociraptor, 500GB week old...
BSOD Help and Support
BSOD - STOP ntfs.sys
Been regularly getting BSOD with STOP message of ntfs for a few weeks now. I have attached the zip file and also a screenshot. I am running Windows 7 Home Premium x64 retail upgrade. Installed about a year ago. The original operating system was Vista ultimate. Have upgraded the motherboard...
BSOD Help and Support
Stop error 24 Ntfs error
Recently I just finished my first build and now i have been getting lots of bsod. Some were due to incompatible ram which is now fixed and replaced. The others are all on booting up. Today i had 24, 7e, 1e and 7e again before it booted correctly. 24 is probably the most common one ive gotten and...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:03.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App