Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD STOP error ntfs & ntoskrnl

13 Jul 2011   #21
MvdB

Windows 7 64b Ultimate
 
 

Quote   Quote: Originally Posted by Deman View Post
They aren't I tryed them, I installed all the drivers for the correct motherboard but the sata one doesnt works.

Edit: Wait I'll reboot pc. Nope, reboot didn't fix it. It keeps saying I don't have the minimum requirements. What are the minimum? :'(

Anyway, should I resort to the pre driver? Maybe the pre driver is needed for the normal one.
Do I even have sata raid? In device management I see my HDD as an ata.
According to my dad I don't have a raid setup, it'll be in the future though because I have two 1tb hdd's. But I first wanna solve the bsod before I put the next one in.
So I guess I should update the hdd firmware?
Strange, what does it say when you try to install it?
It is true you doe not have a raid setup... but it still needs a Serial ATA driver that comes with your board...


My System SpecsSystem Spec
.
13 Jul 2011   #22
Deman

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by MvdB View Post
Quote   Quote: Originally Posted by Deman View Post
They aren't I tryed them, I installed all the drivers for the correct motherboard but the sata one doesnt works.

Edit: Wait I'll reboot pc. Nope, reboot didn't fix it. It keeps saying I don't have the minimum requirements. What are the minimum? :'(

Anyway, should I resort to the pre driver? Maybe the pre driver is needed for the normal one.
Do I even have sata raid? In device management I see my HDD as an ata.
According to my dad I don't have a raid setup, it'll be in the future though because I have two 1tb hdd's. But I first wanna solve the bsod before I put the next one in.
So I guess I should update the hdd firmware?
Strange, what does it say when you try to install it?
It is true you doe not have a raid setup... but it still needs a Serial ATA driver that comes with your board...
Well it just install and than says you dont reach the required minimum.

And the driver name says Intel SATA RAID Driver. So I guess there is no non raid driver?
My System SpecsSystem Spec
13 Jul 2011   #23
MvdB

Windows 7 64b Ultimate
 
 

Quote   Quote: Originally Posted by Deman View Post
They aren't I tryed them, I installed all the drivers for the correct motherboard but the sata one doesnt works.

Edit: Wait I'll reboot pc. Nope, reboot didn't fix it. It keeps saying I don't have the minimum requirements. What are the minimum? :'(

Anyway, should I resort to the pre driver? Maybe the pre driver is needed for the normal one.
Do I even have sata raid? In device management I see my HDD as an ata.
According to my dad I don't have a raid setup, it'll be in the future though because I have two 1tb hdd's. But I first wanna solve the bsod before I put the next one in.
So I guess I should update the hdd firmware?
OK, just to be sure, try the other one... if that does not work, check what exact driver came on the disc with your mobo...
My System SpecsSystem Spec
.

13 Jul 2011   #24
Deman

Windows 7 Ultimate x64
 
 

I'll do the firmware update this evening when I'm back from work, it requires you to make a dos thingy and update it from there or whatever.
And when I check the mobo disc it doesn't show in the autorun menu. However when I check the disc itself I do find some AHCI drivers I guess I need those? They are in the folder MSM but when I try to install it I get the same not meeting the minimum requirements.
However, there is another driver but that is about marvell. Do I have marvell? No clue what it is
This is the list I can choose out, maybe one of these is the needed one.
Quote:
1)Intel Matrix Storage driver for 32bit system
2)Intel Matrix Storage driver for 64bit system
3)GIGABYTE GSATA driver for 32bit system
4)GIGABYTE GSATA driver for 64bit system
5)Marvell AHCI driver for 32bit system
6)Marvell AHCI driver for 64bit system
7)Intel Rapid Storage driver for 32bit system
8)Intel Rapid Storage driver for 64bit system
0)exit
My System SpecsSystem Spec
13 Jul 2011   #25
MvdB

Windows 7 64b Ultimate
 
 

Let's see what code W7 uses itself... in devicedrivers, when you go to update your IDE/ATA, what does it say? Can you post a snip of the details?
My System SpecsSystem Spec
13 Jul 2011   #26
Deman

Windows 7 Ultimate x64
 
 

It has ata channels going twice 0 and twice 1.
Than there are 2 with names:
Intel(R) 6 Series/C200 Series Chipset Family 2 port Serial ATA Storage Controller - 1C08
Intel(R) 6 Series/C200 Series Chipset Family 4 port Serial ATA Storage Controller - 1C00

When I use the options to search drivers itself it finds nothing but when I use the option to search drivers manually and pointing it to the disc it updated the driver.

Okey they both have the same version now, it updated from 9.2.0.1011 to 9.2.0.1014.
I'm now off to work, if you have any more suggestions please make them. Maybe this solved BSOD? Only time will tell.
My System SpecsSystem Spec
13 Jul 2011   #27
MvdB

Windows 7 64b Ultimate
 
 

Quote   Quote: Originally Posted by Deman View Post
It has ata channels going twice 0 and twice 1.
Than there are 2 with names:
Intel(R) 6 Series/C200 Series Chipset Family 2 port Serial ATA Storage Controller - 1C08
Intel(R) 6 Series/C200 Series Chipset Family 4 port Serial ATA Storage Controller - 1C00

When I use the options to search drivers itself it finds nothing but when I use the option to search drivers manually and pointing it to the disc it updated the driver.

Okey they both have the same version now, it updated from 9.2.0.1011 to 9.2.0.1014.
I'm now off to work, if you have any more suggestions please make them. Maybe this solved BSOD? Only time will tell.
Hope so...if not, try the automatic scanner from intel:
http://downloadcenter.intel.com/defa...+dnlds_drivers
My System SpecsSystem Spec
14 Jul 2011   #28
Deman

Windows 7 Ultimate x64
 
 

I think it's solved? So the combination of the latest gigabyte drivers + ata driver from disc fixed it?

Anyway, if it is solved thx If not still thx but than I'll be back.
My System SpecsSystem Spec
16 Jul 2011   #29
Deman

Windows 7 Ultimate x64
 
 

Tadaaa I'm back!!
Okey, so it didn't fixed. I started up my PC today and every program started crashing with the details APPCRASH. So it sometimes does this before it BSOD's, but not this time. Nothing happend so I restarted my PC to avoid the damn crashes.
Than it BSOD on my at booting, system_service_exception 0x0000003b caused by driver: ntoskrnl.exe.
So should I look into updating my HDD firmware? Because the FAQ of samsung says my HDD needs an update to avoid compatibility problems.
http://www.samsung.com/global/busine...bbs_msg_id=308

Edit: FAQ says boot in dos, the f3.zip only contains f3.exe could they really make DOS into this exe? Because if not than I would have to flash the usb to go dos right?

Edit2: I tried to run the program and it said that it wasn't made for my drive.
Could it be because of this?
2. Please connect Target HDD to Primary / Mast.

Because I do have a 103SJ F3
My System SpecsSystem Spec
16 Jul 2011   #30
MvdB

Windows 7 64b Ultimate
 
 

Quote   Quote: Originally Posted by Deman View Post
Tadaaa I'm back!!
Okey, so it didn't fixed. I started up my PC today and every program started crashing with the details APPCRASH. So it sometimes does this before it BSOD's, but not this time. Nothing happend so I restarted my PC to avoid the damn crashes.
Than it BSOD on my at booting, system_service_exception 0x0000003b caused by driver: ntoskrnl.exe.
So should I look into updating my HDD firmware? Because the FAQ of samsung says my HDD needs an update to avoid compatibility problems.
http://www.samsung.com/global/busine...bbs_msg_id=308

Edit: FAQ says boot in dos, the f3.zip only contains f3.exe could they really make DOS into this exe? Because if not than I would have to flash the usb to go dos right?

Edit2: I tried to run the program and it said that it wasn't made for my drive.
Could it be because of this?
2. Please connect Target HDD to Primary / Mast.

Because I do have a 103SJ F3

Yep, I'd do this. Easiest would be to burn their iso on a cd... and boot with the cd. It will open in a DOS screen that comes with their software.

Another choice is the USB stick as you suggested but then you'll have to know how to make sure your BIOS allows / is set to allow booting from USB...
My System SpecsSystem Spec
Reply

 BSOD STOP error ntfs & ntoskrnl




Thread Tools




Similar help and support threads
Thread Forum
BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys
Hi, to make things easier for you,below is the Bug Check String, Driver, and crash address SYSTEM_SERVICE_EXCEPTION___dxgmms1.sys___ntoskrnl.exe+75bc0 MEMORY_MANAGEMENT_______ntoskrnl.exe____ntoskrnl.exe+75bc0 SYSTEM_SERVICE_EXCEPTION___ntoskrnl.exe____ntoskrnl.exe+75bc0...
BSOD Help and Support
BSOD error STOP 1e tcpip.sys and ntoskrnl.exe
Hello on Tuesday and Wednesday of last week my computer BSOD once on each day. For the past week it's been fine until yesterday and Today where it has BSOD multiple times. I wasn't playing any games and the programs I were running were Steam, utorrent 2.2.1 and spotify. I just let my computer sit...
BSOD Help and Support
BSoD at random times, error 0x000000C4 (STOP): Ntfs.sys
Hello, I have been encountering some BSoD trouble in the recent past. In the most recent crashed, the Ntfs.sys filename appeared on the BSoD (it was previously some other one). Following, the BSoD Analysis tutorial, I grabbed the following information during the inspection of the most recent...
BSOD Help and Support
BSOD error Stop 0xa - IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe
So I've been done a lot of testing on my own, then finally went through about a dozen similar topics and I just can't figure out what's wrong on my own. First, my system specs: Windows Ultimate x64 i7 920 Asus P6T mobo 12GB RAM ( two 3x2gb tri channels ) 300GB velociraptor, 500GB week old...
BSOD Help and Support
BSOD - STOP ntfs.sys
Been regularly getting BSOD with STOP message of ntfs for a few weeks now. I have attached the zip file and also a screenshot. I am running Windows 7 Home Premium x64 retail upgrade. Installed about a year ago. The original operating system was Vista ultimate. Have upgraded the motherboard...
BSOD Help and Support
Stop error 24 Ntfs error
Recently I just finished my first build and now i have been getting lots of bsod. Some were due to incompatible ram which is now fixed and replaced. The others are all on booting up. Today i had 24, 7e, 1e and 7e again before it booted correctly. 24 is probably the most common one ive gotten and...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:45.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App