Daily continuos Bsod


  1. Posts : 1
    Windows 7 Home Premium 64 bit
       #1

    Daily continuos Bsod


    So. I made me a new computer in may and everything seemed to be fine. Until bsod started to appear. First it seemed that there was problems with the memory. I got new to replace them. Nothing happened.

    BCC and BCP-info seems to be hinting to hard drive, ethernet or graphics card problems. I have checked drivers and they should be fine.

    I have tried everything that can be tried with my know how. I really could use some help here. I did as was instructed in this threads info and the zip-file is attached. Hope I did everything correctly. Please tell if not so.

    I´ve already put my computer info on my profile but here they are again:

    OS
    Windows 7 Home Premium 64 bit
    CPU
    AMD PHENOM II X4 955 AM3
    Motherboard
    MSI 870A-G54 AM3 AMD870 DDR3
    Memory
    Kingston HyperX 2x2GB, DDR3 1600MHz
    Graphics Card(s)
    AMD Radeon HD 6850 Direct CU
    Hard Drives
    Samsung 1TB SpinPoint F3 3.5", SATAII, 32MB, 7200RPM
    PSU
    650W Core Edition ATX-virtalähde, 80+ Bronze
    Case
    Define R3 Titanium Grey ATX

    Thank you in advance.
      My Computer


  2. Posts : 28,845
    Win 8 Release candidate 8400
       #2

    Tero said:
    So. I made me a new computer in may and everything seemed to be fine. Until bsod started to appear. First it seemed that there was problems with the memory. I got new to replace them. Nothing happened.

    BCC and BCP-info seems to be hinting to hard drive, ethernet or graphics card problems. I have checked drivers and they should be fine.

    I have tried everything that can be tried with my know how. I really could use some help here. I did as was instructed in this threads info and the zip-file is attached. Hope I did everything correctly. Please tell if not so.

    I´ve already put my computer info on my profile but here they are again:

    OS
    Windows 7 Home Premium 64 bit
    CPU
    AMD PHENOM II X4 955 AM3
    Motherboard
    MSI 870A-G54 AM3 AMD870 DDR3
    Memory
    Kingston HyperX 2x2GB, DDR3 1600MHz
    Graphics Card(s)
    AMD Radeon HD 6850 Direct CU
    Hard Drives
    Samsung 1TB SpinPoint F3 3.5", SATAII, 32MB, 7200RPM
    PSU
    650W Core Edition ATX-virtalähde, 80+ Bronze
    Case
    Define R3 Titanium Grey ATX

    Thank you in advance.

    Memory corruption caused by a driver please run these two tests.



    Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

    Boot from the CD, and leave it running for at least 5 or 6 passes.

    Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

    Test the sticks individually, and if you find a good one, test it in all slots.



    Driver verifier

    I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

    In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

    Then, here's the procedure:
    - Go to Start and type in "verifier" (without the quotes) and press Enter
    - Select "Create custom settings (for code developers)" and click "Next"
    - Select "Select individual settings from a full list" and click "Next"
    - Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
    - Select "Select driver names from a list" and click "Next"
    Then select all drivers NOT provided by Microsoft and click "Next"
    - Select "Finish" on the next page.

    Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

    If you can't get into Windows because it crashes too soon, try it in Safe Mode.
    If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 06:20.
Find Us