but removed MBAM at the request of Norton as they said it could interfere with Norton products.
MBAM has no conflicts with Norton at all.
Download Malwarebytes and run a full scan, your system seems to be infected
The symantec engine used by N360 caused your BSODs, I'd recommend completely removing Norton and reinstalling from scratch, your N360 has corrupt install
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 7A, {c0501af0, c0000185, 261ae8c0, a035e830}
Unable to load image \??\C:\ProgramData\Norton\{0C55C096-0F1D-4F28-AAA2-85EF591126E7}\N360_5.1.0.29\Definitions\VirusDefs\20110722.040\NAVEX15.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for NAVEX15.SYS
*** ERROR: Module load completed but symbols could not be loaded for NAVEX15.SYS
*** WARNING: Unable to verify timestamp for SRTSP.SYS
*** ERROR: Module load completed but symbols could not be loaded for SRTSP.SYS
Probably caused by : NAVEX15.SYS ( NAVEX15+5b8af )
Followup: MachineOwner
---------
1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: c0501af0, lock type that was held (value 1,2,3, or PTE address)
Arg2: c0000185, error status (normally i/o status code)
Arg3: 261ae8c0, current process (virtual address for lock type 3, or PTE)
Arg4: a035e830, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
Debugging Details:
------------------
ERROR_CODE: (NTSTATUS) 0xc0000185 - The I/O device reported an I/O error.
DISK_HARDWARE_ERROR: There was error with disk hardware
BUGCHECK_STR: 0x7a_c0000185
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: dllhost.exe
CURRENT_IRQL: 0
TRAP_FRAME: ac8475d0 -- (.trap 0xffffffffac8475d0)
ErrCode = 00000000
eax=a035e838 ebx=0005e830 ecx=00000002 edx=00000000 esi=a035e830 edi=986bbed0
eip=82a8f8d8 esp=ac847644 ebp=ac84764c iopl=0 nv up ei ng nz ac pe cy
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010297
nt!memcpy+0x128:
82a8f8d8 8b448ef8 mov eax,dword ptr [esi+ecx*4-8] ds:0023:a035e830=00000000
Resetting default scope
LAST_CONTROL_TRANSFER: from 82af9e35 to 82b34f2c
STACK_TEXT:
ac847434 82af9e35 0000007a c0501af0 c0000185 nt!KeBugCheckEx+0x1e
ac8474a4 82afd716 ac8474f8 82bc0240 ac847518 nt!MiWaitForInPageComplete+0x302
ac847534 82ae6967 82bc0240 a035e830 850b5128 nt!MiIssueHardFault+0x3b3
ac8475b8 82a973d8 00000000 a035e830 00000000 nt!MmAccessFault+0x2656
ac8475b8 82a8f8d8 00000000 a035e830 00000000 nt!KiTrap0E+0xdc
ac84764c 9e45b8af 986bbed0 a035e830 00000008 nt!memcpy+0x128
WARNING: Stack unwind information not available. Following frames may be wrong.
ac84767c 9e46039f 0005e830 00000008 986bbed0 NAVEX15+0x5b8af
ac8476a0 9e478003 00000008 986bbed0 00000000 NAVEX15+0x6039f
ac8476dc 9e467cc6 00000002 9efb2d28 9e7d0c1a NAVEX15+0x78003
ac847708 9e466456 00000000 0000007f 986b9100 NAVEX15+0x67cc6
ac84774c 9e40876f 9e56f570 8f846d68 00000000 NAVEX15+0x66456
ac84778c 9e40f286 ac8477f0 9e56f570 8f846ca0 NAVEX15+0x876f
ac8477f8 9dc8d23f acba8190 8f846ca0 8f846d68 NAVEX15+0xf286
ac847854 9dc7caad 8f846e68 8f846c88 00000005 SRTSP+0x5823f
ac8478d4 9dc7ddee 00000001 00000002 8f846c88 SRTSP+0x47aad
ac8478ec 9dc7ecfa 9bd3f580 8f846c88 82b18b87 SRTSP+0x48dee
ac847908 9dc7edd3 8f846c88 ac8479a4 00000000 SRTSP+0x49cfa
ac84792c 9dc5a68e ac19a8b0 858ca008 858ca0c0 SRTSP+0x49dd3
ac847980 88c0d324 858ca068 ac8479a4 00000000 SRTSP+0x2568e
ac8479e8 88c10512 008ca008 858ca008 1000000c fltmgr!FltpPerformPostCallbacks+0x24a
ac8479fc 88c10b46 858ca008 865055a0 ac847a3c fltmgr!FltpProcessIoCompletion+0x10
ac847a0c 88c1129c 858aded8 865055a0 858ca008 fltmgr!FltpPassThroughCompletion+0x98
ac847a3c 88c248c9 ac847a5c 00000000 00000000 fltmgr!FltpLegacyProcessingAfterPreCallbacksCompleted+0x33a
ac847a88 82a8d593 858aded8 858d7008 85942c0c fltmgr!FltpCreate+0x2db
ac847aa0 82c9c2ad b2d529d6 ac847c48 00000000 nt!IofCallDriver+0x63
ac847b78 82c7bab5 858ab5e0 85aba298 9b0aa750 nt!IopParseDevice+0xed7
ac847bf4 82c8bec6 00000000 ac847c48 00000040 nt!ObpLookupObjectName+0x4fa
ac847c50 82c829a4 0168de50 84aba298 00000001 nt!ObOpenObjectByName+0x165
ac847ccc 82c88b2a 0168deb0 00100021 0168de50 nt!IopCreateFile+0x673
ac847d14 82a941ea 0168deb0 00100021 0168de50 nt!NtOpenFile+0x2a
ac847d14 77a470b4 0168deb0 00100021 0168de50 nt!KiFastCallEntry+0x12a
0168debc 00000000 00000000 00000000 00000000 0x77a470b4
STACK_COMMAND: kb
FOLLOWUP_IP:
NAVEX15+5b8af
9e45b8af ?? ???
SYMBOL_STACK_INDEX: 6
SYMBOL_NAME: NAVEX15+5b8af
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: NAVEX15
IMAGE_NAME: NAVEX15.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 4dcc44a1
FAILURE_BUCKET_ID: 0x7a_c0000185_NAVEX15+5b8af
BUCKET_ID: 0x7a_c0000185_NAVEX15+5b8af
Followup: MachineOwner
---------