Crash dump need debugging


  1. Posts : 5
    windows 7 64bit Pro
       #1

    Crash dump need debugging


    Need som help debuging

    It crashs random
      My Computer


  2. Posts : 28,845
    Win 8 Release candidate 8400
       #2

    NoProzac said:
    Need som help debuging

    It crashs random

    Memory corruption (probably by a driver) Please run these



    Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

    Boot from the CD, and leave it running for at least 5 or 6 passes.

    Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

    Test the sticks individually, and if you find a good one, test it in all slots.



    Driver verifier

    I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

    In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

    Then, here's the procedure:
    - Go to Start and type in "verifier" (without the quotes) and press Enter
    - Select "Create custom settings (for code developers)" and click "Next"
    - Select "Select individual settings from a full list" and click "Next"
    - Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
    - Select "Select driver names from a list" and click "Next"
    Then select all drivers NOT provided by Microsoft and click "Next"
    - Select "Finish" on the next page.

    Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

    If you can't get into Windows because it crashes too soon, try it in Safe Mode.
    If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
      My Computer


  3. Posts : 5
    windows 7 64bit Pro
    Thread Starter
       #3

    have bin running Memtest86 for over 8hours now, still running. 5 are passed, 0 errors....
    I' will run it for 4hours more.

    What can i do if no errors are fund?

    Before I started the memtest, it restarted 3times randomly and noe cashdump. one time i was surfing the web, 2time gaming. 3time i had only startet windows. time line are all from 3min to 5hours
      My Computer


  4. Posts : 5
    windows 7 64bit Pro
    Thread Starter
       #4

    top
      My Computer


  5. Posts : 5
    windows 7 64bit Pro
    Thread Starter
       #5

    have had memtest run 16pass zero errors, it still chrashes, but now it is not making chash dump film, only restart.
      My Computer


  6. Posts : 5
    windows 7 64bit Pro
    Thread Starter
       #6

    Got a new dump fil. Help?
      My Computer


  7. Posts : 28,845
    Win 8 Release candidate 8400
       #7

    NoProzac said:
    Got a new dump fil. Help?

    Memory corruption probably caused by a driver. please run these two tests



    Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

    Boot from the CD, and leave it running for at least 5 or 6 passes.

    Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

    Test the sticks individually, and if you find a good one, test it in all slots.



    Driver verifier

    I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

    In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

    Then, here's the procedure:
    - Go to Start and type in "verifier" (without the quotes) and press Enter
    - Select "Create custom settings (for code developers)" and click "Next"
    - Select "Select individual settings from a full list" and click "Next"
    - Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
    - Select "Select driver names from a list" and click "Next"
    Then select all drivers NOT provided by Microsoft and click "Next"
    - Select "Finish" on the next page.

    Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

    If you can't get into Windows because it crashes too soon, try it in Safe Mode.
    If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 13:21.
Find Us