Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 0x107 after 0xA, no pattern tho

08 Aug 2011   #11
ferjero989

Windows 8.1 Pro 64bit
 
 

i just got a 0x109 T_T .. . .
there might be something bad with my board/hdd/ram
at the moment of the bsod the computer was doing heavy hdd operations (steam game cache checks)
attached the report.
i might just upgrade this board, after all is about 4-5 years old.
im going with these:
gigabyte GA-990FXA-UD3 and G.Skill Ripjaws F3-16000CL9D-8GBRM - Memory - 8 GB : 2 x 4 GB.

opinions? (im gonna need a massive backup cuz im gonna loose my raid i know...



My System SpecsSystem Spec
.
08 Aug 2011   #12
ferjero989

Windows 8.1 Pro 64bit
 
 

i read somewhere about some issues with memory hole remapping .. ill turn it off and see what happens Problem using 4gb in 64 bits

also, my ram might need some tweaking, aparently there are issues running all 4 sticks on nforce boards http://www.evga.com/forums/tm.aspx?m=127243
My System SpecsSystem Spec
08 Aug 2011   #13
ferjero989

Windows 8.1 Pro 64bit
 
 

well.. after a few adjustements.. here is the aida64 results
Code:
Field    Value
Sensor Properties    
Sensor Type    ITE IT8716F  (ISA 290h)
GPU Sensor Type    Driver  (NV-DRV)
Motherboard Name    Asus M3N-HD/HDMI
Chassis Intrusion Detected    No
    
Temperatures    
Motherboard    36 C  (97 F)
CPU    45 C  (113 F)
CPU #1 / Core #1    50 C  (122 F)
CPU #1 / Core #2    50 C  (122 F)
CPU #1 / Core #3    50 C  (122 F)
CPU #1 / Core #4    50 C  (122 F)
MCP    53 C  (127 F)
GPU    52 C  (126 F)
WDC WD5000AADS-11M2B1    30 C  (86 F)
WDC WD5000AAKX-001CA0 (WD-WCAYUE037550)    33 C  (91 F)
WDC WD5000AAKX-001CA0 (WD-WCAYUD944681)    34 C  (93 F)
WDC WD5000AAKX-001CA0 (WD-WCAYUE073154)    33 C  (91 F)
ST3320613AS (9SZ6M2G4)    36 C  (97 F)
ST3320613AS (9SZ6M4WF)    34 C  (93 F)
WDC WD5000BMVW-11AMCS0    41 C  (106 F)
    
Cooling Fans    
CPU    5625 RPM
GPU    1020 RPM
    
Voltage Values    
CPU Core    1.328 V
+3.3 V    3.408 V
+5 V    5.053 V
+12 V    12.096 V
+5 V Standby    5.080 V
VBAT Battery    3.152 V
GPU Core    0.987 V
Field    Value
North Bridge Properties    
North Bridge    AMD K10 IMC
Supported Memory Types    DDR2-400, DDR2-533, DDR2-667, DDR2-800, DDR2-1066, DDR3-800, DDR3-1066, DDR3-1333, DDR3-1600 SDRAM
Revision    00
Probe Filter    Not Supported
    
Memory Controller    
Type    Dual Channel  (128-bit)
Active Mode    Dual Channel  (128-bit) - Unganged
    
Memory Timings    
CAS Latency (CL)    5T
RAS To CAS Delay (tRCD)    5T
RAS Precharge (tRP)    5T
RAS Active Time (tRAS)    18T
Row Cycle Time (tRC)    20T
Command Rate (CR)    2T
RAS To RAS Delay (tRRD)    3T
Write Recovery Time (tWR)    6T
Write To Read Delay (tWTR)    3T
Read To Precharge Delay (tRTP)    5T
Four Activate Window Delay (tFAW)    14T
Write CAS Latency (tWCL)    5T
Refresh Period (tREF)    7.8 us
DRAM Drive Strength    1.0x
DRAM Data Drive Strength    1.0x
Clock Drive Strength    1.5x
CKE Drive Strength    1.5x
Idle Cycle Limit    16
    
Error Correction    
ECC    Supported, Disabled
ChipKill ECC    Supported, Disabled
RAID    Not Supported
DRAM Scrub Rate    Disabled
L1 Data Cache Scrub Rate    Disabled
L2 Cache Scrub Rate    Disabled
L3 Cache Scrub Rate    Disabled
    
Memory Slots    
DRAM Slot #1    2 GB  (DDR2-800 DDR2 SDRAM)
DRAM Slot #2    2 GB  (DDR2-800 DDR2 SDRAM)
DRAM Slot #3    2 GB  (DDR2-800 DDR2 SDRAM)
DRAM Slot #4    2 GB  (DDR2-800 DDR2 SDRAM)
My System SpecsSystem Spec
.

08 Aug 2011   #14
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

What did you set the NB Chip voltage to?
Memory voltage?

The 'Wanna run 4x2GB on nForce board?' link is good info, did you follow all the settings he mentioned?

Most systems need some tweaking when running 4GB RAM or more, 4 RAM cards, these normally require NB (NB Chip voltage for yours) voltage and sometimes RAM voltage bumps.
More RAM chips need more voltage.

For the NB Chip voltage try the 1.313v first, if you get any crashes go to the 1.409v.
My System SpecsSystem Spec
08 Aug 2011   #15
ferjero989

Windows 8.1 Pro 64bit
 
 

i set it to 1.4 yesterday. and it was sorta fine, but (i left the pc on all nite doing nothing) this morning, i woke up the pc, clicked on verify game cache (for another game) and got a 0x24 on ntfs.sys.
this is... annoying.

in other news
i got an email from rosewill about the psu.
i asked them, "i noticed the little table of data in the psu stating that the +12v1 is 20amp, +12v2 is 20amp, +12v3 is 30amp and the +12v4 is 30amp. which cable i need to use the 30amp since my card needs 24.
they say
use the orange 8 pin cable, but only connect 6 into your card.
with pictures and everything. so whoever has the same psu Beware:
If you own a Rosewill RBR1000-M PSU, and you need more than 20amps on your video card, you must use the orange 8 ping pci-c cable, and connect that into your card

about the settings..
the memory voltage was on 1.978v (which is the lowest) so i took it up one notch to 2.080v
i had the nb chip voltage to auto, so i moved it into 1.313v.. lets see what happens
also... how bout the cpu-nb voltage and the cpu voltage.. i currently have them on 1.4 and 1.3625
My System SpecsSystem Spec
08 Aug 2011   #16
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Good catch on the PSU.

Voltage settings also look good, you might need to adjust them as explained in the link you posted.


STOP*0x00000024: NTFS_FILE_SYSTEM
Usual causes:* Disk corruption, insufficient physical memory, Device driver, Indexing, Resident antivirus, backup, defrag programs, Disk/Drive failing/failure

Cause: One possible cause of this bug check is disk corruption.

Run your HDD manufacturers disk diagnostic utility.

Can you give us information on you HDD setup?

There are a lot of HDD errors on different HDDs.
Code:
Event[14]:
  Log Name: System
  Source: Disk
  Date: 2011-08-06T18:06:24.997
  Event ID: 51
  Task: N/A
  Level: Warning
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: jesus-pc
  Description: 
An error was detected on device \Device\Harddisk3\DR12 during a paging operation.

Code:
Event[39]:
  Log Name: System
  Source: Ntfs
  Date: 2011-08-06T18:06:24.907
  Event ID: 137
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: jesus-pc
  Description: 
The default transaction resource manager on volume P: encountered a non-retryable error and could not start.  The data contains the error code.

Code:
Event[48]:
  Log Name: System
  Source: Disk
  Date: 2011-08-06T18:05:58.022
  Event ID: 11
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: jesus-pc
  Description: 
The driver detected a controller error on \Device\Harddisk3\DR12.
Code:
Event[53]:
  Log Name: System
  Source: Disk
  Date: 2011-08-06T18:05:24.965
  Event ID: 51
  Task: N/A
  Level: Warning
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: jesus-pc
  Description: 
An error was detected on device \Device\Harddisk3\DR10 during a paging operation.
Code:
Event[164]:
  Log Name: System
  Source: Service Control Manager
  Date: 2011-08-06T17:53:01.054
  Event ID: 7023
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: jesus-pc
  Description: 
The VMware USB Arbitration Service service terminated with the following error: 
A device attached to the system is not functioning.

Update driver or app:
Part of a Copy Protection platform dveloped by Tages SA: http://www.tagesprotection.com/
Code:
Event[185]:
  Log Name: System
  Source: Service Control Manager
  Date: 2011-08-06T17:52:36.484
  Event ID: 7000
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: jesus-pc
  Description: 
The atksgt service failed to start due to the following error: 
This driver has been blocked from loading

STOP*0x00000109: CRITICAL_STRUCTURE_CORRUPTION
Usual causes:* Device driver, Breakpoint set with no debugger attached, Hardware (Memory in particular)


Code:
Event[253]:
  Log Name: System
  Source: Disk
  Date: 2011-08-06T16:30:11.609
  Event ID: 11
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: jesus-pc
  Description: 
The driver detected a controller error on \Device\Harddisk7\DR13.

Code:
Event[259]:
  Log Name: System
  Source: Disk
  Date: 2011-08-06T16:30:07.397
  Event ID: 51
  Task: N/A
  Level: Warning
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: jesus-pc
  Description: 
An error was detected on device \Device\Harddisk7\DR12 during a paging operation.

Open Core Temp and monitor when the system is stressed, or while running Prime95.
Code:
Event[637]:
  Log Name: System
  Source: Microsoft-Windows-Kernel-Power
  Date: 2011-08-06T15:46:14.198
  Event ID: 89
  Task: N/A
  Level: Information
  Opcode: Info
  Keyword: N/A
  User: S-1-5-18
  User Name: NT AUTHORITY\SYSTEM
  Computer: jesus-pc
  Description: 
ACPI thermal zone ACPI\ThermalZone\THRM has been enumerated.             
_PSV = 346K             
_TC1 = 4             
_TC2 = 3             
_TSP = 6000ms             
_AC0 = 346K             
_AC1 = 0K             
_AC2 = 0K             
_AC3 = 0K             
_AC4 = 0K             
_AC5 = 0K             
_AC6 = 0K             
_AC7 = 0K             
_AC8 = 0K             
_AC9 = 0K             
_CRT = 348K             
_HOT = 0K             
_PSL - see event data.
My System SpecsSystem Spec
09 Aug 2011   #17
ferjero989

Windows 8.1 Pro 64bit
 
 

the hard disk 3 is a portable (hence the letter P) is a 500gb western digital drive i use for stuff.
tages shouldnt be on my pc, since i formated etc., ill download prime and check it tonite. and prolly run the hdd test tomorrow..
my hdd setup is the following
2x ST3320613AS on raid 0 for windows and apps
3x WDC WD5000AAKX-001CA0 on raid 5 for data
1x WDC WD5000AADS-11M2B1 for tv series and anime.. (my board doesnt like him on the raid 5.. so i couldnt add him)..
ill get 3 more WD5000AAKX and add them to the raid 5. and i will take out the seagates and the lonely wd drive. (my next setup)
the thing about the link i posted.. is that i dont QUITE understand everything.. cuz the terms arent the same as my board..
for example.. my board had NB voltage, cpu-NB voltage and CPU voltage... is kinda confusing.
My System SpecsSystem Spec
09 Aug 2011   #18
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

NB voltage is for the motherboard NB chip, it's separate from the CPU integrated NB memory controller.

CPU-NB voltage is the CPU integrated memory controller, this voltage can be set separately from the CPU voltage.

CPU voltage is the power to the CPU, processor itself.


Let us know the HDD test results for all the HDDs. It will take a while to test them all.
My System SpecsSystem Spec
10 Aug 2011   #19
ferjero989

Windows 8.1 Pro 64bit
 
 

the seagate test for the raid 0, each individual drive (short test) came up ok. i couldnt run the test for the raid 5 as the western digital software doesnt see them (for some reason)
i ran memtest 4.20
and got one error so far. (still running)
tst -pass failling address --------- good ------bad -------err-bits ---count chan
6-- 0 ----000ac466dc - 172.2 mb..08000000 08800000 00800000 1
5.....1.....000037dae58 - 55.8mb..00010000.00810000.00800000.2
5.....1.....000077dae38 -119.8mb.00010000.00810000.00800000.3
6.....1.....000037da69c-55.8mb...00000800.00800800.00800000.4
6.....1.....000015d269c-21.8mb...08000000.08800000.00800000.5
6.....1.....00003cd66dc-60.8mb....00100000.00900000.00800000.6
8.....1.....000058c669c-88.7mb....427b3b70.42fb3b70.008000000.7
8.....1.....0000464e6dc-70.3mb....686a9a9b.68ea9a9b.008000000.8

by using the address, how can i calculate which stick is the faulty one?
i tried hex to decimal coversion, and the first one gives me around 180, which seems close to 172.2mb, does it means it failed at the 172.2mb mark? (which is the first stick?)

so... im testing one stick at a time in the first slot.. i hope i get errors, cuz if not. it means its a slot/voltage problem.. which is harder to fix T_T
My System SpecsSystem Spec
11 Aug 2011   #20
ferjero989

Windows 8.1 Pro 64bit
 
 

well.. one of them did failed i only ran each one for 3 passes.. the third stick failed in the pass 0.
meh..
My System SpecsSystem Spec
Reply

 0x107 after 0xA, no pattern tho




Thread Tools




Similar help and support threads
Thread Forum
various BSODs, not much of a pattern
Hi, I have problems with BSODs on my PC, including page_fault_in_nonpaged_area, driver_irql_not_less_or_equal, system_service_exception, system_thread_exception_not_handled. They seem to be somewhat random except *maybe* occurring more often during gaming (although that might just be me noticing it...
BSOD Help and Support
BSOD, doesn't seem to be any pattern.
Hey folks, my friend has been experiencing strange BSODs, seemingly without any pattern. Sometime it crashes when idle, sometimes under load. Sometimes goes a good few hours of solid work without any issues. The laptop is used to run a business, so would like to resolve this issue ASAP. Not sure if...
BSOD Help and Support
BSOD every 20 minutes or so, no particular pattern
Yesterday I noticed this Chitka advertising thing, have tried malwarebytes to get rid of it, hasn't worked. Now getting BSOD as well every 20 minutes or so. Otherwise, computer functionality is fine. Thanks for your help
BSOD Help and Support
BSOD With No Discernible Pattern
I am still having BSOD after 5-10 mins of restarting the laptop. I have just updated the latest crash dump. I desperately need this fixed, I do not want to shell out another $700 for a laptop, but I am a full time student and I need my computer to work properly! I re-installed the driver for the...
BSOD Help and Support
Getting quite a lot of BSOD's - Can't see a pattern
Hi all, as per title I am suffering from quite a lot of BSOD incidents, I have attached the required logs/reports. Computer is a Acer Extensa 5620 Laptop with Core 2 Duo proc and 3GB RAM, approx 4 years old. Win 7 Ultimate x64 Retail. With my limited understandng I noticed that a software called...
BSOD Help and Support
Win 7 crashes - pattern
Hi All, I have a problem with crashes in my Win 7 PRof x64 edition; all crashes that I get relate to the following: Kernel-Power event ID 41 category ID (63) - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Microsoft-Windows-Kernel-Power"...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:24.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App