Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Crashed during Sleep, possible BSOD

10 Aug 2011   #1
Alextkexichi

Windows 7 64-bit Home Edition
 
 
Crashed during Sleep, possible BSOD

Recently (approx 2 weeks old), fresh reinstall of Windows 7:

Put the computer to "Sleep' night of 8/8, gone all day on 8/9, attempted to wake computer up on 8/10. Had to press power button to start computer. Greeted with message saying "Windows has recovered from an unexpected shutdown"

This has happened at least one other time. I've run the Windows repair prior to booting into Windows 7 so it has not solved the problem. I submit this for assistance to help iron this out, because it's beyond me.

System specs can be found in my profile.
Zip file, per thread sticky has been attached.

Thanks!


My System SpecsSystem Spec
.
12 Aug 2011   #2
Alextkexichi

Windows 7 64-bit Home Edition
 
 

Interesting twist on this situation: Put computer to sleep last night, woke up this morning and it was on, however it was unresponsive and nothing would show up on the screen. I've attached the file, per the forum sticky instructions.
My System SpecsSystem Spec
12 Aug 2011   #3
FredeGail

Microsoft Windows 7 Ultimate: x64 (SP1)
 
 

Hello Alextkexichi & Welcome to SevenForums!

Have tried running a SFC /SCANNOW Command - System File Checker?

Best Regards,
FredeGail
My System SpecsSystem Spec
.

12 Aug 2011   #4
Alextkexichi

Windows 7 64-bit Home Edition
 
 

I just ran scannow, but I didn't see any issues.
My System SpecsSystem Spec
15 Aug 2011   #5
Alextkexichi

Windows 7 64-bit Home Edition
 
 

Since I have ran the scan, I've experienced the same problem. I managed to snap a picture of the BSOD - Internal_Power_Error

No idea what that is supposed to indicate or what to do about it.

Please help

Thanks,
My System SpecsSystem Spec
16 Aug 2011   #6
Alextkexichi

Windows 7 64-bit Home Edition
 
 

Since my post 23 hours ago, I've now experienced two more crashes. One was while the computer was asleep and the other was while I was generating the System Health Report. I've since completed the Report and am reposting.
My System SpecsSystem Spec
16 Aug 2011   #7
Alextkexichi

Windows 7 64-bit Home Edition
 
 

I'm not seeing a lot of particiption and I understand we're all busy, but let me know if I'm lacking in supplying infomraiton or anything that may help me resolve this problem. I really appreciate it everyone!
My System SpecsSystem Spec
18 Aug 2011   #8
Alextkexichi

Windows 7 64-bit Home Edition
 
 

Any help? Did I not provide enough information?
My System SpecsSystem Spec
18 Aug 2011   #9
LiquidSnak

W7 Professional x64
 
 

Turn Off Hybrid Sleep in Windows 7 — MAXIMUMpcguides – Windows 7 tips, tricks, help, and how-to guides

If you follow those instructions to disable hybrid sleep, that could be the issue here. If it's already off, or you are still experiencing the same volume of crashes, let us know and we'll try something else.
My System SpecsSystem Spec
18 Aug 2011   #10
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Hello and Welcome!

Sorry for the late response!

Seems like the crash is caused by scmndisp.sys which is NDIS Filter Driver belongs to Symantec Security Drivers(Part of Symantec Norton Internet Security suite). I would recommend to uninstall it completely. Also run the the Cleanup Tool from Symantec's Website. Download and run the Norton Removal Tool to uninstall your Norton product | Norton Support

Code:
BugCheck A, {0, 2, 1, fffff80002ee36ec}

Unable to load image \SystemRoot\system32\DRIVERS\scmndisp.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002ee36ec, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff8000310e100
 0000000000000000 

CURRENT_IRQL:  2

FAULTING_IP: 
nt!KeWaitForSingleObject+13c
fffff800`02ee36ec f00fba2e07      lock bts dword ptr [rsi],7

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xA

PROCESS_NAME:  System

TRAP_FRAME:  fffff880009e7e50 -- (.trap 0xfffff880009e7e50)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=00000000002c5845 rbx=0000000000000000 rcx=0000000000000002
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002ee36ec rsp=fffff880009e7fe0 rbp=0000000000000000
 r8=fffff78000000008  r9=0000000000000000 r10=0000000000000000
r11=fffff80003051e80 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
nt!KeWaitForSingleObject+0x13c:
fffff800`02ee36ec f00fba2e07      lock bts dword ptr [rsi],7 ds:00000000`00000000=????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002edb1e9 to fffff80002edbc40

STACK_TEXT:  
fffff880`009e7d08 fffff800`02edb1e9 : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`009e7d10 fffff800`02ed9e60 : fffffa80`159635d0 00000000`00000001 fffff880`009e7ef0 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`009e7e50 fffff800`02ee36ec : 00000000`00000000 fffff880`0412819a 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x260
fffff880`009e7fe0 fffff880`0143c992 : 00000000`00000000 fffffa80`00000000 fffffa80`14bf7700 fffff800`02ed1e00 : nt!KeWaitForSingleObject+0x13c
fffff880`009e8080 fffff880`0187d6d1 : 00000000`00000000 fffffa80`0f02b0d0 00000000`00000000 00000000`00000000 : ndis!NdisWaitEvent+0x32
fffff880`009e80c0 00000000`00000000 : fffffa80`0f02b0d0 00000000`00000000 00000000`00000000 fffff880`013f63e0 : scmndisp+0x16d1


STACK_COMMAND:  kb

FOLLOWUP_IP: 
scmndisp+16d1
fffff880`0187d6d1 ??              ???

SYMBOL_STACK_INDEX:  5

SYMBOL_NAME:  scmndisp+16d1

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: scmndisp

IMAGE_NAME:  scmndisp.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  45add4b3

FAILURE_BUCKET_ID:  X64_0xA_scmndisp+16d1

BUCKET_ID:  X64_0xA_scmndisp+16d1

Followup: MachineOwner
---------
My System SpecsSystem Spec
Reply

 Crashed during Sleep, possible BSOD




Thread Tools




Similar help and support threads
Thread Forum
Computer crashed in sleep mode then reboots/shuts down unlimited times
Last night i manually put my computer in sleep mode and went to bed. When i woke up i came down and my computer was rebooting itself then shutting itself down as soon as it rebooted. I stood there and watched it do this about 4 times, all 4 times my screen was black. I then shut it down manual...
General Discussion
Windows 7 crashed with BSOD
Is Windows 7 . . . - 64bit original and only OS installed on system - an OEM version - I build the system no more than one month ago - I installed the OS around the same time.
BSOD Help and Support
[BSOD] - Crashed twice in an hour
Neither time have I seen the error screen itself, but my computer has crashed twice this morning while in the midst of streaming video from Netflix instant view. I guess it doesn't take a genius to guess that this is where the problem is hiding. I lack the current technical knowledge to analyze the...
BSOD Help and Support
Windows 7 x64 Crashed BSOD Help please!
Hello everyone, This is my first time in the forum:geek: nice to meet you all. I just bought new PC which I build it myself. in order to get you to see the whole picture I need you to hear the story behind this BSOD issue problem which I am not sure that is it related to each other or not. So...
BSOD Help and Support
BSOD crashed... new computer :(
Ok so Im not too skilled on a computer. I just bought a brand new Dell Inspiron with windows 7 64 bit for school. I have been having BSOD crashes more and more frequently and now its to the point where I cant study anymore. Thanks for anyone that can help me out! PLEASE anything advice will...
BSOD Help and Support
BSOD crashed... new computer :(
Ok so Im not too skilled on a computer. I just bought a brand new Dell Inspiron with windows 7 64 bit for school. I have been having BSOD crashes more and more frequently and now its to the point where I cant study anymore. Thanks for anyone that can help me out! PLEASE anything advice...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 03:49.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App