Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Daily BSOD on a fairly recent install

12 Aug 2011   #1

Windows 7 Home Premium x64
Daily BSOD on a fairly recent install

Thanks for looking at my thread. I recently had a harddrive crash so i had to purchase a new one and re-install my OS roughly 2 weeks ago. At that time I also upgraded my videocard from an 8800GT to a Radeon HD 6870. Since that time I have been encountering a BSOD at least once a day. I am running a Genuine MSDN Windows 7 x64 Home Premium. My hardware is 2 years old with several upgrades since that time (Power Supply, Video Card, HDD, and Audio Card).

Thank you for your time

My System SpecsSystem Spec
12 Aug 2011   #2

Windows 10 Pro x64, Arch Linux

Your Belkin/Marvell N1 Wireless Desktop Card driver is the cause of BSODs, please update it
Belkin : Support : Network Adapters

The ASUS Xonar DG Audio Interface driver also caused issues, update it
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck D1, {8, 2, 0, fffff88006c99164}

Unable to load image \SystemRoot\system32\DRIVERS\MRVW148.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for MRVW148.sys
*** ERROR: Module load completed but symbols could not be loaded for MRVW148.sys
Probably caused by : MRVW148.sys ( MRVW148+30164 )

An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arg1: 0000000000000008, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88006c99164, address which referenced memory

Debugging Details:

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002ccd100


fffff880`06c99164 8b4808          mov     ecx,dword ptr [rax+8]





TRAP_FRAME:  fffff88002ffb9d0 -- (.trap 0xfffff88002ffb9d0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa80047a1180
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88006c99164 rsp=fffff88002ffbb60 rbp=fffffa8004974740
 r8=fffff88002ffbc00  r9=0000000000000000 r10=0000000000018dfb
r11=0000000000000002 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na po nc
fffff880`06c99164 8b4808          mov     ecx,dword ptr [rax+8] ds:00000000`00000008=????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002a9a1e9 to fffff80002a9ac40

fffff880`02ffb888 fffff800`02a9a1e9 : 00000000`0000000a 00000000`00000008 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`02ffb890 fffff800`02a98e60 : fffffa80`03b85d28 fffff880`06a335c2 fffffa80`02721ad0 fffffa80`047a1000 : nt!KiBugCheckDispatch+0x69
fffff880`02ffb9d0 fffff880`06c99164 : fffffa80`047a1000 fffff880`08600000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x260
fffff880`02ffbb60 fffffa80`047a1000 : fffff880`08600000 00000000`00000000 00000000`00000000 00000000`00000000 : MRVW148+0x30164
fffff880`02ffbb68 fffff880`08600000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0xfffffa80`047a1000
fffff880`02ffbb70 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0xfffff880`08600000


fffff880`06c99164 8b4808          mov     ecx,dword ptr [rax+8]



FOLLOWUP_NAME:  MachineOwner




FAILURE_BUCKET_ID:  X64_0xD1_MRVW148+30164

BUCKET_ID:  X64_0xD1_MRVW148+30164

Followup: MachineOwner
My System SpecsSystem Spec
12 Aug 2011   #3

Microsoft Windows 7 Ultimate: x64 (SP1)

Hello Shimmer93 & Welcome to SevenForums!


One of the BSOD was caused by "Belkin N1 Wireless Desktop Card", it's 4 years old. An update might fix this. Visit the link below for downloads.

Belkin : Support : Network Adapters


LMVM *MRVW148.sys*
2: kd> lmvm MRVW148
start             end                 module name
fffff880`080ed000 fffff880`0816e000   MRVW148  T (no symbols)           
    Loaded symbol image file: MRVW148.sys
    Image path: \SystemRoot\system32\DRIVERS\MRVW148.sys
    Image name: MRVW148.sys
    Timestamp:        Sat Dec 08 01:56:19 2007 (4759EBB3)
    CheckSum:         00086092
    ImageSize:        00081000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Best Regards,

Sorry yowanvista for replying also. I pressed POST and saw your message appeared
My System SpecsSystem Spec

14 Aug 2011   #4

Windows 7 Home Premium x64

I haven't had the BSOD since I updated those drivers. Thanks for the help from both of you. I have marked the thread as solved and REP'ed you both.

Thanks alot!
My System SpecsSystem Spec
15 Aug 2011   #5

Microsoft Windows 7 Ultimate: x64 (SP1)

Quote   Quote: Originally Posted by Shimmer93 View Post
I haven't had the BSOD since I updated those drivers. Thanks for the help from both of you. I have marked the thread as solved and REP'ed you both.

Thanks alot!
Your reputation is most appreciated!
It's been a great honor troubleshooting with you. :)

Best Regards,
My System SpecsSystem Spec

 Daily BSOD on a fairly recent install

Thread Tools

Similar help and support threads
Thread Forum
BSOD on fairly new clean install, comes randomly. memory problem?
New guy here, I have a OLD hp tower with asus MB, amd 64x2 cpu, 2 tb HD that I had win7 home edition 32 bit installed on by a very good local tech. The problem is after installing all my software, (I use it for music editing) and upgrading the RAM to 4gb, I now get random minidumps. I have...
BSOD Help and Support
BSOD happens daily at completely random times, recent error:0x0000004E
Hi, I've been experiencing blue screens almost daily for 6 months now. It all start around the time I upgraded to windows 8 in the summer. Since then, I downgraded to windows 7 and also experienced blue screens daily. I've updated all motherboard drivers (chipset, lan, usb ect) as well as network...
BSOD Help and Support
BSOD Since Win 7 64 bit Install, happens daily
i recently rebuilt my comp ground up new HD MB and CPU and operating system since then i get BSOD every day and at random times tried mem testing for 2 hours no help no errors any help be great
BSOD Help and Support
BSOD playing Guild Wars 2, recent SSD install and fresh install of W7
I just added a new SSD drive and installed a fresh copy of Win 7 Enterprise. I have had a previous driver issue with this system in the past. The amazing people on this site helped me work it out. Now for the life I just can't seem to sort it out again myself this time. I ran and uploaded the...
BSOD Help and Support
BSOD daily oem fujitsu install
Any help with this would be a great help. Thanks. Microsoft Windows 7 Ultimate x64 FUJITSU E8420
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 19:15.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App