Random BSODs + Memory Dump Fail

Hello cxw22 & Welcome to SevenForums!

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa80065498f8, 0, 0}

Probably caused by : hardware

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80065498f8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000000, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------


BUGCHECK_STR:  0x124_GenuineIntel

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  0

STACK_TEXT:  
fffff880`03d776f0 fffff800`02cd2c59 : fffffa80`065498d0 fffffa80`05518040 00000000`0000000c 00000000`00000000 : nt!WheapCreateLiveTriageDump+0x6c
fffff880`03d77c10 fffff800`02bb2fa7 : fffffa80`065498d0 fffff800`02c2d2b8 fffffa80`05518040 00000000`00000000 : nt!WheapCreateTriageDumpFromPreviousSession+0x49
fffff880`03d77c40 fffff800`02b1a5c5 : fffff800`02c8eac0 00000000`00000001 fffffa80`0650e830 fffffa80`05518040 : nt!WheapProcessWorkQueueItem+0x57
fffff880`03d77c80 fffff800`02a9a021 : fffff880`01127e00 fffff800`02b1a5a0 fffffa80`05518000 d36bd36b`23ad23ad : nt!WheapWorkQueueWorkerRoutine+0x25
fffff880`03d77cb0 fffff800`02d2c32e : 62516251`01a401a4 fffffa80`05518040 00000000`00000080 fffffa80`054fe740 : nt!ExpWorkerThread+0x111
fffff880`03d77d40 fffff800`02a81666 : fffff880`03b6a180 fffffa80`05518040 fffff880`03b750c0 79b579b5`198a198a : nt!PspSystemThreadStartup+0x5a
fffff880`03d77d80 00000000`00000000 : fffff880`03d78000 fffff880`03d72000 fffff880`03d76d90 00000000`00000000 : nt!KiStartSystemThread+0x16


STACK_COMMAND:  kb

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: hardware

IMAGE_NAME:  hardware

DEBUG_FLR_IMAGE_TIMESTAMP:  0

FAILURE_BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_MAE_PRV

BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_MAE_PRV

Followup: MachineOwner

I suspect your CPU to be our cause. Test it with Prime95, there's a tutorial below. Run Small FFT - Large FFT - Blend.

https://www.sevenforums.com/tutorials...t-prime95.html

Monitor your temperature during the process. :)

Best Regards,
FredeGail

cxw22 said:

Thanks. I heard this is a great forum but that could be upsetting. I've actually fooled around a bit with my processor and OC'ed it for a month or so but ended putting back to stock. I've always monitored my temps and currently have the Corsair H50 keeping it in the mid 30c at idle. However i'll run a stress test to check again. How long should i run it for and run all 3 or just blend?

Leave the test running for up to 6 hours, unless errors occur sooner. Oh and, I recommend running all three. :)

Appreciate you chosen this forum,
FredeGail

Its been running close to 3 hours now. Temps have been stable at low 60's. I don't think the CPU is the problem.

cxw22 said:

Update: 5hr 30mins with no problems.... I guess the problem is something else

Have you been through all three phrases?

Best Regards,
FredeGail