Bsods

Hello windows 7 forums, my pc is once again plagued by the dreaded bsod and I need help please. I have been encountering different random errors ranging from a bad pool header, to a memory management error and a bccode:e1 error. I have no idea on what to do to fix this. They all pop up randomly, so I can't pinpoint what the exact cause is. I am on Windows 7 Proffesional, full retail version, just reinstalled yesterday and my hardware is 9 months old.

Upyrs07 said:

Hello windows 7 forums, my pc is once again plagued by the dreaded bsod and I need help please. I have been encountering different random errors ranging from a bad pool header, to a memory management error and a bccode:e1 error. I have no idea on what to do to fix this. They all pop up randomly, so I can't pinpoint what the exact cause is. I am on Windows 7 Proffesional, full retail version, just reinstalled yesterday and my hardware is 9 months old.

Related to yk62x64.sys NDIS6.20 Miniport Driver for Marvell Yukon Ethernet Controller from Marvell. I would re-install the newest available.

Thanks for quick reply. That's strange... I am sure that was one of the first things I have installed. I will try and reinstall right now. One question though, since my motherboard has 2 lan ports, do I have to install the driver on each one separately?

Apparently a new bsod error has shown up:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80002ED2E7B
BCP3: FFFFF88009369E70
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
I have uploaded a new attachment for it.

Upyrs07 said:

Apparently a new bsod error has shown up:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80002ED2E7B
BCP3: FFFFF88009369E70
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
I have uploaded a new attachment for it.

This is a common memory exception. Please run the following 2 tests.



1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier

I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

Driver Verifier - Enable and Disable