Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Xbox 360 controller wired BSOD

20 Aug 2011   #1

win 7 64 bit SP1
Xbox 360 controller wired BSOD

Hello everyone,
I just bought a xbox 360 controller wired via amazon.
After plugging it in there instantly appeared a blue screen:
Problemereignisname: BlueScreen
Betriebsystemversion: 6.1.7601.
Gebietsschema-ID: 1031

Zusatzinformationen zum Problem:
BCCode: 1000007e
BCP2: 0000000000000000
BCP3: FFFFF880031E0988
BCP4: FFFFF880031E01E0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

also helpful when explaining the problem:

i googled the issue and several threads came up but none solved my problem.
So i really hope some1 can help, wanna play fifa 11

Im using windows 7 64 bit SP1

My System SpecsSystem Spec
20 Aug 2011   #2

Windows 10 Pro x64, Arch Linux

BSODs caused by MijXfilt.sys - MotioninJoy Virtual Xinput device Filter Driver, remove this software

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done: DuplexSecure - Downloads
You can use MagicDisc as an alternative.
sptd.sys        fffff880`010a4000    fffff880`011ca000    0x00126000    0x4ad24632    12/10/2009 00:55:14
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: 0000000000000000, The address that the exception occurred at
Arg3: fffff880031d2988, Exception Record Address
Arg4: fffff880031d21e0, Context Record Address

Debugging Details:

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

00000000`00000000 ??              ???

EXCEPTION_RECORD:  fffff880031d2988 -- (.exr 0xfffff880031d2988)
ExceptionAddress: 0000000000000000
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000008
   Parameter[1]: 0000000000000000
Attempt to execute non-executable address 0000000000000000

CONTEXT:  fffff880031d21e0 -- (.cxr 0xfffff880031d21e0)
rax=fffffa8006dd4370 rbx=fffffa80040fbd20 rcx=0000057ff922bff8
rdx=0000000000000000 rsi=0000057ffbf043c8 rdi=0000057ff922bff8
rip=0000000000000000 rsp=fffff880031d2bc8 rbp=fffff800030262b8
 r8=fffff880071d6101  r9=fffffa80040fbd20 r10=fffffa8003b6a010
r11=0000000000000000 r12=fffffa8006a524c0 r13=0000000000000001
r14=0000000000000000 r15=0000000000000001
iopl=0         nv up ei pl zr na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010246
00000000`00000000 ??              ???
Resetting default scope





ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1:  0000000000000008

EXCEPTION_PARAMETER2:  0000000000000000

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800030b8100

fffff880`071c4d21 ??              ???

00000000`00000000 ??              ???


LAST_CONTROL_TRANSFER:  from fffff880071c4d21 to 0000000000000000

fffff880`031d2bc8 fffff880`071c4d21 : fffffa80`040fbc30 00000000`00000000 00000000`00000001 fffffa80`00000000 : 0x0
fffff880`031d2bd0 fffffa80`040fbc30 : 00000000`00000000 00000000`00000001 fffffa80`00000000 00000000`00000031 : MijXfilt+0x2d21
fffff880`031d2bd8 00000000`00000000 : 00000000`00000001 fffffa80`00000000 00000000`00000031 fffffa80`06a524c0 : 0xfffffa80`040fbc30


SYMBOL_NAME:  MijXfilt+2d21

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  MijXfilt.sys


STACK_COMMAND:  .cxr 0xfffff880031d21e0 ; kb

FAILURE_BUCKET_ID:  X64_0x7E_NULL_IP_MijXfilt+2d21

BUCKET_ID:  X64_0x7E_NULL_IP_MijXfilt+2d21

Followup: MachineOwner
My System SpecsSystem Spec

 Xbox 360 controller wired BSOD

Thread Tools

Similar help and support threads
Thread Forum
BSOD driver framework error, while using wired xbox 360 controller
Hey guys apologies if I'm supposed to make this on another users thread with the same issue, I just wasn't exactly sure if I make my own thread or not.. But the issue is, when playing selected steam games (most recently Borderlands 2) with a wired xbox 360 controller, I eventually get a BSOD...
BSOD Help and Support
BSOD When Booting After Installing Xbox 360 Wired Controller Drivers
Hello. I am having a ridiculously hard time figuring out how to fix this BSOD i've been getting this past week. I keep getting BSOD "PROCESS1_INITIALIZATION_FAILED" every single time I restart upon installing the drivers for my Xbox 360 Wired Controller. I then try the System Restore and...
BSOD Help and Support
BSOD trying to use Xbox 360 Wired Controller (Win 7 HP x64)
I've used a wireless 360 controller with receiver now flawlessly for ~1 year. Bought a Wired one today, except whenever I plug it in, I get an immediate BSOD! I've taken the usual precautions of uninstalling MotionInJoy (both from control panel AND by deleting the appropriate driver from...
BSOD Help and Support
BSOD when plugging in wired xbox 360 controller -x64
- x64 Home Premium - the original installed OS - OEM - system is 4 months old Attached are the dumps from 3 crashes. The PC health html file will not upload - it tells me the file is invalid. Happens as soon as I plug the controller in. I appreciate any assistance you can offer
BSOD Help and Support
Xbox 360 Controller (Wired) Issues
Hi guys, Bear with me, I'm not the most proficient with technology and such so technical jargon and the lot will just confuse me :D NOTE: I have read other forums with similar problems but it doesn't seem to be working out for me (then again half the time I have no idea what they are saying...

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:17.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App