Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Bsod 116

24 Aug 2011   #11

Windows 7 64b Ultimate

ok, thx.. it could be a temp/wiring thing. Sometimes when the mobo get cold, the metal literally shrinks... and IF there is a small / thin disconnection, that is when it shows. Subsequently, when turned on an things get warm, metal expands and the problem is over.
Turn off system, disconnect power and reseat everything you dare (know how) to reseat.....

My System SpecsSystem Spec
27 Aug 2011   #12

Windows 7 Ultimate 64bit

Sorry for the late reply, been quite ill the last few days.

Anyways update: i took your advice and basically took everything off my mobo and re-sat it all. Started up ok after the usual bios being stupid. Later turned it off, went to work and now that im home, tried to turn it on and i had the No 1. problem (aka starts up until after starting windows screen then restarts).

Attached is the minidump file from when i just logged in 10mins ago.

My System SpecsSystem Spec
27 Aug 2011   #13

Windows 7 64b Ultimate

This is still a Graphics problem:

HTML Code:
Attempt to reset the display driver and recover from timeout failed.
Arg1: fffffa80091d84e0, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff8800fb71cd8, The pointer into responsible device driver module (e.g. owner tag).
Arg3: 0000000000000000, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000002, Optional internal context dependent data.

BugCheck 116, {fffffa80091d84e0, fffff8800fb71cd8, 0, 2}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+170cd8 )
From here it could still be 3 things:

1. Incorrect powerlan/energysaving settings on graphics card. Check both powerplan and energysettings in your Devices screen. Do not do ANY powersaving.

2. Driver problem. Re-do the steps to update Graphics driver as in my earlier post, in admin mode if needed: Built-in Administrator Account - Enable or Disable

3. Graphics card HW... let's hope it is not this option. Only way to check is to replace/borrow etc...
My System SpecsSystem Spec


 Bsod 116

Thread Tools

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:28.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App