Hello all, first post, looking for assistance on ntoskrnl.exe
Windows 7 Pro 64 bit SP1 on Thinkpad X220. I've attached the requested zip file and also my screenshot from Blue Screen Viewer.
Any help is greatly appreciated.
This only seems to occur, on battery, right away when the laptop is trying to connect to a familiar wireless network.
Thanks in advance
Hello there!
Seems like multiple things are going on. Download a update version of Network drivers and Remove you Network drivers and install the new one. If your Overclocking please stop. Reset the BIOS to default settings.
Run Hardware Diagnostic (RAM, GPU and Hard drive) : Hardware Diagnostic | Captain Debugger
Run SFC SCANNOW to make sure all the OS files are intact.
Update the Following Drivers:
How to Update Drivers on Windows 7 | Captain DebuggerCode:TVicPort64.SYS Wed Mar 30 14:42:54 2005 - EnTech Taiwan psadd.sys Tue Feb 20 00:26:37 2007 - SMBIOS Driver
Bugcheck:
Code:IRQL_NOT_LESS_OR_EQUAL (a) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses. If a kernel debugger is available get the stack backtrace. Arguments: Arg1: ffffb80001c95888, memory referenced Arg2: 0000000000000002, IRQL Arg3: 0000000000000001, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: fffff80001ad0e60, address which referenced memory Debugging Details: ------------------ WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80001cff100 ffffb80001c95888 CURRENT_IRQL: 2 FAULTING_IP: nt!KeSetEvent+2ce fffff800`01ad0e60 f0410fba2907 lock bts dword ptr [r9],7 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT BUGCHECK_STR: 0xA PROCESS_NAME: System TRAP_FRAME: fffff8800251d840 -- (.trap 0xfffff8800251d840) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=0000000000000002 rbx=0000000000000000 rcx=fffff80001c95878 rdx=fffff80001c518a0 rsi=0000000000000000 rdi=0000000000000000 rip=fffff80001ad0e60 rsp=fffff8800251d9d0 rbp=0000000000000000 r8=fffff80001c51690 r9=ffffb80001c95888 r10=0000000000000000 r11=0000000000000000 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up ei ng nz ac po cy nt!KeSetEvent+0x2ce: fffff800`01ad0e60 f0410fba2907 lock bts dword ptr [r9],7 ds:0010:ffffb800`01c95888=???????? Resetting default scope LAST_CONTROL_TRANSFER: from fffff80001acc1e9 to fffff80001accc40 STACK_TEXT: fffff880`0251d6f8 fffff800`01acc1e9 : 00000000`0000000a ffffb800`01c95888 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx fffff880`0251d700 fffff800`01acae60 : 0000129d`00000001 00001f80`00d00080 00000000`000001d0 00000000`00000000 : nt!KiBugCheckDispatch+0x69 fffff880`0251d840 fffff800`01ad0e60 : 00000000`00000000 00000000`00000010 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x260 fffff880`0251d9d0 fffff800`01ab796c : 00000000`00000000 00000000`00000000 fffffa80`00000000 fffff800`01c518a0 : nt!KeSetEvent+0x2ce fffff880`0251da40 fffff800`01ab7cd3 : 00000000`00000008 fffff880`0251dad0 00000000`00000001 fffffa80`00000000 : nt!MmWorkingSetManager+0x1b4 fffff880`0251da90 fffff800`01d67fee : fffffa80`066b68e0 00000000`00000080 fffffa80`06673b30 00000000`00000001 : nt!KeBalanceSetManager+0x1c3 fffff880`0251dc00 fffff800`01abe5e6 : fffff880`009e5180 fffffa80`066b68e0 fffff880`009effc0 1d4db102`4be54915 : nt!PspSystemThreadStartup+0x5a fffff880`0251dc40 00000000`00000000 : fffff880`0251e000 fffff880`02518000 fffff880`0251d5c0 00000000`00000000 : nt!KxStartSystemThread+0x16 STACK_COMMAND: kb FOLLOWUP_IP: nt!KeSetEvent+2ce fffff800`01ad0e60 f0410fba2907 lock bts dword ptr [r9],7 SYMBOL_STACK_INDEX: 3 SYMBOL_NAME: nt!KeSetEvent+2ce FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 4e02aaa3 FAILURE_BUCKET_ID: X64_0xA_nt!KeSetEvent+2ce BUCKET_ID: X64_0xA_nt!KeSetEvent+2ce Followup: MachineOwner
Quote