BIOS Screen runs 38 seconds


  1. Posts : 17
    Windows 7 Home Premium Edition 64 bit
       #1

    BIOS Screen runs 38 seconds


    Hi,
    I wrote earlier about this problem I am having when I start up my PC. Hopefully some one can help me? I get a blue screen with the words "F10=SETUP. When I hit F10 nothing happens. After approximately 38 seconds what I call the main blue BIOS screen comes up briefly and goes away and Windows starts up. Its this first blue screen I want to get rid of. This situation cropped up about a week ago. I even have done a restore to an earlier time, but it did not solve this problem. Any ideas? Thank you.
      My Computer


  2. Posts : 6,668
    Windows 7 x64
       #2

    The problem is sounding as much bios induced as a windows problem. Are you able to start it in safe mode without this occurring?

    My first guess just based on what's being described is a bad bios battery.
      My Computer


  3. Posts : 17
    Windows 7 Home Premium Edition 64 bit
    Thread Starter
       #3

    I don't know. I haven't tried this. My PC is only 4 months old. I don't have a clue where the BIOS battery is. On the mother board? Thank you.
      My Computer


  4. Posts : 6,668
    Windows 7 x64
       #4

    Hmm... seems less likely if it's new.

    Here's the instructions on safe mode
    Safe Mode

    Right now the best thing you can do is try to get us the information laid out here.
    https://www.sevenforums.com/crashes-d...tructions.html
      My Computer


  5. Posts : 4,049
    W7 Ultimate SP1, LM19.2 MATE, W10 Home 1703, W10 Pro 1703 VM, #All 64 bit
       #5

    Check Your Connections


    Turn the power off BEFORE messing around inside your PC (disconnect from the mains).

    Make sure that all of your power and data cables are properly seated in their connectors.

    I experienced something similar with my PC.
    It seemed to be caused by a dodgy power connector plugged into one of my DVD drives!

    I have no idea why that caused that problem though.
      My Computer


  6. Posts : 3,612
    Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
       #6

    hi:)
    i found this the other day on bios when i was surfing for bios problems for my dads pc you may find something useful BIOS and EFI - Setup program used in desktop and laptop computers/PCs - P1 of 2
      My Computer


  7. Posts : 6,668
    Windows 7 x64
       #7

    lehnerus2000 said:
    Turn the power off BEFORE messing around inside your PC (disconnect from the mains).

    Make sure that all of your power and data cables are properly seated in their connectors.

    I experienced something similar with my PC.
    It seemed to be caused by a dodgy power connector plugged into one of my DVD drives!

    I have no idea why that caused that problem though.
    Actually intermittent power connection to a drive would change boot drive info in turn the computer asks for user input on boot devices every reboot.
      My Computer


  8. Posts : 4,049
    W7 Ultimate SP1, LM19.2 MATE, W10 Home 1703, W10 Pro 1703 VM, #All 64 bit
       #8

    Reasonable


    Maguscreed said:
    lehnerus2000 said:
    Turn the power off BEFORE messing around inside your PC (disconnect from the mains).

    Make sure that all of your power and data cables are properly seated in their connectors.

    I experienced something similar with my PC.
    It seemed to be caused by a dodgy power connector plugged into one of my DVD drives!

    I have no idea why that caused that problem though.
    Actually intermittent power connection to a drive would change boot drive info in turn the computer asks for user input on boot devices every reboot.
    That sounds plausible.
    The drive connection that was causing the problem wasn't selected in the BIOS though (the other DVD drive was).
      My Computer


  9. Posts : 6,668
    Windows 7 x64
       #9

    Still it's a change in boot devices. Whenever that occurs most bios will prompt for user input.
    My machine in the den does it every time you boot with a usb drive plugged in. Regardless of if it has boot information on it.

    ...that's a much older mobo though.
      My Computer


  10. Posts : 4,049
    W7 Ultimate SP1, LM19.2 MATE, W10 Home 1703, W10 Pro 1703 VM, #All 64 bit
       #10

    Poorly Phrased


    lehnerus2000 said:
    I have no idea why that caused that problem though.
    That was poorly phrased by me.
    I had suspicions (but no proof).

    In my case, it seemed that the BIOS kept trying to contact the DVD drive and after about 30 seconds it would give up and boot the system from the HDD (like it was supposed to).

    My MB is fairly new.
    I only got it in May, but I think that it had been available for about a year.
    I read a review on that MB series (not my board specifically) that was done in 2010.

    The BIOS on this MB reconfigures itself at every boot up.
    I can't have it remember USB > DVD > HDD > Other unless all of the devices are present.
    If any device is missing, it rewrites the boot device order.

    My old MBs would remember the boot settings you selected, even if the device was no longer present.
    Last edited by lehnerus2000; 06 Sep 2011 at 10:54. Reason: Additional
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 04:48.
Find Us