Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Code 0xc0000428! Now "short Bluescreen"

10 Sep 2011   #1
halfo

Windows 7 Ultimate x64
 
 
Code 0xc0000428! Now "short Bluescreen"

Hello,

I've got a problem. My Computer crashed after downloading a software.
Message:

File: CI.dll
Status: 0xc0000428
Info: Windows cannot verify the digital signature for this file


Ok, then i read on a website that i can solve the problem with following petitions from the Win 7 Setup Disc prompt.

X:\Sources>bootrec /Fixmbr
X:\Sources>bootrec /Fixboot
X:\Sources>bootrec /RebuildBCD


Whereby "Fixboot" didn't work, because an error message said that no data medium were found.

BUT after that the error message with the "Ci.dll" appeared.
And at that moment, a "short Bluescreen" (maybe a half second long, i could'nt read what's the message) appeared and my Computer restarted, and restarted and so it went on.

I checked my RAM und HDD with the "UBCD System" - both passed with no errors.
I also made a "Disc Wiping", also "Passed with nonfatal Errors". (ok under that message there stand something with "Error: /dev/svd crash") .....

I scaned my Computer with the "Avira Rescue System", and deleted all Viruses.

My problem is, that i cannot reinstall Windows 7, because i cannot take an data medium. It said me, that no data medium were found.

Sorry for my bad english, i hope you can understand my problem.

EDIT:
Comp. details:
https://h10025.www1.hp.com/ewfrf/wc/...roduct=4291401

Best regards,
halfo


My System SpecsSystem Spec
.
11 Sep 2011   #2
halfo

Windows 7 Ultimate x64
 
 

No one?
My System SpecsSystem Spec
18 Sep 2011   #3
themitch

Windows 7 ultimate x64
 
 

i dont know or this problem is still up to date, but if so:

on startup when you get the choice between starting windows 7 normally and the disc checker, you should stand on ''Start windows 7 normally'' and then hit F8, after that go all the way down, and hit: ''boot without driver signature'' and it should work fine :)
My System SpecsSystem Spec
.

18 Sep 2011   #4
halfo

Windows 7 Ultimate x64
 
 

When i hit "STRG and F8" during the startup, i come into "Advanced Boot Options", then i go down to "Disable Driver Signature Enforcement" and press Enter, but the short Bluescreens appears again.


Message:
ImageShack® - Online Photo and Video Hosting
My System SpecsSystem Spec
Reply

 Code 0xc0000428! Now "short Bluescreen"




Thread Tools




Similar help and support threads
Thread Forum
"the drive or network connection that the short cut "lnk" unavail"....
Hi, so currently i have a problem, every time i click on a launcher this message appears "The drive or network connection that the shortcut 'Planetside 2.lnk' refers to is unavailable. Make sure that the disk is properly inserted or the network resource is available, and then try again". (please...
Drivers
"windows cannot verify the digital signature for this file" 0xc0000428
Hi, I went out and left my pc on, came back hours later and wiggled the mouse to get the pc to come on, nothing happened so i pressed some keys, may of restarted pc, pc boots as normal but a screen comes up saying choose and operating system to start, or press tab to select a tool. i then click on...
General Discussion
NVIDIA video card driver ...not working..? Code 43, "BlueScreen".
With how my computer appears presently, I'm surprised I was even able to register at this site. Before I start, I will tell you all that the graphical error I am experiencing cannot be screen-captured, When I do the Image looks like how the monitor is intended to appear. Windows 7 Ultimate...
Drivers
windows update error code "WindowsUpdate_80073712" "WindowsUpdate_dt00
windows update error code "WindowsUpdate_80073712" "WindowsUpdate_dt000" To anyone that can help me out: I purchased a windows anytime upgrade key and upgraded my system from windows 7 home premiuim to windows 7 ultimate now when my windows tries to update I get this: (See image titled...
Windows Updates & Activation
How to suppress "Shortcut to ..." when creating a short
Is there a way to tell Win7 NOT to prepend automatically a "shortcut to" when I create a shortcut to an existing file? This was possible in WinXP. So I guess it is possible in Win7 too. But how exactly? Peter
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 19:06.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App