Random BSOD CRITICAL_OBJECT_TERMINATION

Since I have changed my primary hard disk with an OCZ SSD Vertex3, I get some random BSOD. Latest one has CRITICAL_OBJECT_TERMINATION error.
Any suggestion, very appreciated

Code:

System Manufacturer/Model Number: DELL Latitude E6520 
OS: Windows 7 Ultimate x64 - 6.1.7601 
CPU: Mobile QuadCore Intel Core i7-2720QM, 3000 MHz (30x100) 
Motherboard: Dell Latitude E6520 - Intel Cougar Point QM67, Sandy Bridge 
Memory: 8GB (2x4) DIMM1: Micron 16JSF512 - DIMM2: Kingston 99054 
Graphics Card(s): NVIDIA NVS 4200M (512 MB) 
Hard Drives: Main (Boot): OCZ Vertex3 - (120GB/SSD/SATA-III) Secondary: Seagate ST9500420AS (500GB/7200/SATA-II)

I have noticed that the BIOS was set to use SATA in RAID mode, whilst not having any. I have set the BIOS to AHCI (had to run a refresh install to make it through). Will tell you if it gets better.