New
#1
BSOD when saving file, error 0x50
Hi,
I sometimes get a bluescreen error when I try to save a file to the hard drive using a VST Host (musical instrument host) software called brainspawn forte (www.brainspawn.com). This software is a "host" for VST software instruments. The host runs, then loads DLLs that are each other software instruments (i.e. one DLL might be a Piano, the next an organ, then a synth, then a drum machine, all loaded within forte, the host). I'm not sure forte is the cause of the problem, but the bluescreen shows up when I try to save a file I have updated, and it does not show up all the time. When the error does happen, it's always during a file saving operation, but it doesn't happen with every file saving operation. Probably 1% of the time, maybe?
I'm running the software on an Open Labs Neko (www.openlabs.com). This is significant because there are some proprietary Open Labs hardware panels, and drivers to go along with those panels. The problem could be related to these drivers (I'm suspect it could be, but not sure).
Hoping to get some help identifying which program or DLL is causing the blue screen.
Here's my system description:
Open Labs Neko Panels
Gigabyte GA-P55A-UD3 rev 1.0 mobo
8GB memory
Intel i7-870 processor
Windows 7 x64
Crucial C300 256GB SSD (boot disk) connected to Sata3 (6Gb/s) port
Two 2GB HDs running in RAID1 on Sata2 port
One additional HD drive connected to Sata2 port (clone of Crucial C300 SSD)
Several proprietary Open Labs panels connected to USB port on mobo
M-Audio 192 PCI Sound Card
ATI/AMD Radeon Video Card (X550 I think, unremarkable)
Mackie Onyx USB sound card
Touch screen monitor (Galaxy?), plugged into USB for touch feature
Thanks in advance for the assistance!
-Mike