New
#1
BSOD during Win7 install (IRQL_NOT_LESS_OR_EQUAL) error 0x0000000a
Dear all,
Never had any problems with WinXP. Tried to upgrade to Win7 64bit and during install I already get BSODs. Removed all memory modules and install could finish, but still occasionally get BSODs.
I have Corsair CM2X1024-6400 XMS6405v5.1 memory modules with an Asus P5N-E SLI motherboard (came bundled as these modules were recommended for the P5N-E).
I have set all BIOS settings to whatever others have recommended in the past for this mainboard, but still the BSODs occur. Here's the result of the CPU-Z validator:
CPU-Z Validator 3.1
Below the results of CPU-Z memory and SPD Slots (each slot same module and results).
I have also tried replacing memory with other modules, and I have tried using the default settings in the BIOS... no results
I tried also changing the timings to 4/4/4/13 and trc=15 (other than the default 5/5/5/18 and trc=22 or the 5/5/5/12 and trc=18 mentioned in other threads) but that makes it crash @ SP1 install too... it does seem more stable since changing it to 4/4/4/13...
If there could be a way to get it back to stable like it is with XP (my XP drive still works, and is stable, but for several reasons I now really need to switch to Win7)...
Also attached an example minidump and the BlueScreenView results of many others. They just points to ntoskernel.exe+705c0 so I still have no idea where to look...
Response much appreciated!
Regards,Code:Is Windows 7 . . . -- YES - x86 (32-bit) or x64 ? -- x64 - the original installed OS on the system? -- XP, but Win7 install was on blank empty drive - an OEM or full retail version? -- Full Retail - What is the age of system (hardware)? -- 4 years (20/06/2007) - What is the age of OS installation (have you re-installed the OS?) -- 0 days
Nika.